On Wed, Mar 07, 2018 at 10:21:43AM -0800, Tony Lindgren wrote:
> We can support the RSTCTRL reset registers on many TI SoCs with
> reset-simple.
>
> Note that some devices will also need to check the RSTST bits
> for reset reason. Support for these could be possibly added to
> the reset controller framework later on.
>
> Cc: Dave Gerlach <d-gerlach@xxxxxx>
> Cc: Mark Rutland <mark.rutland@xxxxxxx>
> Cc: Nishant Menon <nm@xxxxxx>
> Cc: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Cc: Suman Anna <s-anna@xxxxxx>
> Cc: Tero Kristo <t-kristo@xxxxxx>
> Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
> ---
>
> Changes since v1:
> - Update patch description to mention the unhandled RSTST bits
> - Rebase against Linux next
>
> ---
> .../devicetree/bindings/reset/ti-rstctrl.txt | 20 ++++++++++++++++++++
> drivers/reset/Kconfig | 3 ++-
> drivers/reset/reset-simple.c | 1 +
> 3 files changed, 23 insertions(+), 1 deletion(-)
> create mode 100644 Documentation/devicetree/bindings/reset/ti-rstctrl.txt
>
> diff --git a/Documentation/devicetree/bindings/reset/ti-rstctrl.txt b/Documentation/devicetree/bindings/reset/ti-rstctrl.txt
> new file mode 100644
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/reset/ti-rstctrl.txt
> @@ -0,0 +1,20 @@
> +TI RSTCTRL Reset Controller
> +
> +Required properties:
> +- compatible : "ti,rstctrl"
> +- reg : Should contain 1 register ranges(address and length)
> +- #reset-cells: 1
> +
> +Example:
> + prm_gfx: prm@1100 {
> + compatible = "simple-bus";
What's a PRM?
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0x1100 0x100>;
And what else is in this range?
> +
> + gfx_rstctrl: rstctrl@4 {
> + compatible = "ti,rstctrl";
> + reg = <0x4 0x4>;
Anytime I see a single register in DT I worry about scaling. How many of
these in an SoC?
> + #reset-cells = <1>;
> + };
> + };
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
