A USB HCD may have several PHYs which need to be configured before the
the HCD starts working.
This adds the documentation for such a USB HCD as well as a reference to
the new "usb-hcd.txt" from all bindings that implement a USB HCD which
support one USB PHY per port.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
Tested-by: Yixun Lan <yixun.lan@xxxxxxxxxxx>
---
Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt | 5 ++++-
Documentation/devicetree/bindings/usb/mediatek,mtu3.txt | 5 ++++-
Documentation/devicetree/bindings/usb/usb-ehci.txt | 6 ++++--
Documentation/devicetree/bindings/usb/usb-hcd.txt | 9 +++++++++
Documentation/devicetree/bindings/usb/usb-ohci.txt | 6 ++++--
Documentation/devicetree/bindings/usb/usb-uhci.txt | 3 +++
Documentation/devicetree/bindings/usb/usb-xhci.txt | 5 +++++
7 files changed, 33 insertions(+), 6 deletions(-)
create mode 100644 Documentation/devicetree/bindings/usb/usb-hcd.txt
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
index 88d9f4a4b280..266c2d917a28 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
@@ -32,7 +32,7 @@ Required properties:
"mcu_ck": mcu_bus clock for register access,
"dma_ck": dma_bus clock for data transfer by DMA
- - phys : a list of phandle + phy specifier pairs
+ - phys : see usb-hcd.txt in the current directory
Optional properties:
- wakeup-source : enable USB remote wakeup;
@@ -52,6 +52,9 @@ Optional properties:
See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
- imod-interval-ns: default interrupt moderation interval is 5000ns
+additionally the properties from usb-hcd.txt (in the current directory) are
+supported.
+
Example:
usb30: usb@11270000 {
compatible = "mediatek,mt8173-xhci";
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
index d589a1ef96a1..3382b5cb471d 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
@@ -17,7 +17,7 @@ Required properties:
- clock-names : must contain "sys_ck" for clock of controller,
the following clocks are optional:
"ref_ck", "mcu_ck" and "dam_ck";
- - phys : a list of phandle + phy specifier pairs
+ - phys : see usb-hcd.txt in the current directory
- dr_mode : should be one of "host", "peripheral" or "otg",
refer to usb/generic.txt
@@ -53,6 +53,9 @@ Optional properties:
- mediatek,u3p-dis-msk : mask to disable u3ports, bit0 for u3port0,
bit1 for u3port1, ... etc;
+additionally the properties from usb-hcd.txt (in the current directory) are
+supported.
+
Sub-nodes:
The xhci should be added as subnode to mtu3 as shown in the following example
if host mode is enabled. The DT binding details of xhci can be found in:
diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt
index 3efde12b5d68..0f1b75386207 100644
--- a/Documentation/devicetree/bindings/usb/usb-ehci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt
@@ -16,10 +16,12 @@ Optional properties:
- has-transaction-translator : boolean, set this if EHCI have a Transaction
Translator built into the root hub.
- clocks : a list of phandle + clock specifier pairs
- - phys : phandle + phy specifier pair
- - phy-names : "usb"
+ - phys : see usb-hcd.txt in the current directory
- resets : phandle + reset specifier pair
+additionally the properties from usb-hcd.txt (in the current directory) are
+supported.
+
Example (Sequoia 440EPx):
ehci@e0000300 {
compatible = "ibm,usb-ehci-440epx", "usb-ehci";
diff --git a/Documentation/devicetree/bindings/usb/usb-hcd.txt b/Documentation/devicetree/bindings/usb/usb-hcd.txt
new file mode 100644
index 000000000000..50529b838c9c
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/usb-hcd.txt
@@ -0,0 +1,9 @@
+Generic USB HCD (Host Controller Device) Properties
+
+Optional properties:
+- phys: a list of all USB PHYs on this HCD
+
+Example:
+ &usb1 {
+ phys = <&usb2_phy1>, <&usb3_phy1>;
+ };
diff --git a/Documentation/devicetree/bindings/usb/usb-ohci.txt b/Documentation/devicetree/bindings/usb/usb-ohci.txt
index 09e70c875bc6..a8d2103d1f3d 100644
--- a/Documentation/devicetree/bindings/usb/usb-ohci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-ohci.txt
@@ -13,10 +13,12 @@ Optional properties:
- remote-wakeup-connected: remote wakeup is wired on the platform
- num-ports : u32, to override the detected port count
- clocks : a list of phandle + clock specifier pairs
-- phys : phandle + phy specifier pair
-- phy-names : "usb"
+- phys : see usb-hcd.txt in the current directory
- resets : a list of phandle + reset specifier pairs
+additionally the properties from usb-hcd.txt (in the current directory) are
+supported.
+
Example:
ohci0: usb@1c14400 {
diff --git a/Documentation/devicetree/bindings/usb/usb-uhci.txt b/Documentation/devicetree/bindings/usb/usb-uhci.txt
index 298133416c97..cc2e6f7d602e 100644
--- a/Documentation/devicetree/bindings/usb/usb-uhci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-uhci.txt
@@ -6,6 +6,9 @@ Required properties:
- reg : Should contain 1 register ranges(address and length)
- interrupts : UHCI controller interrupt
+additionally the properties from usb-hcd.txt (in the current directory) are
+supported.
+
Example:
uhci@d8007b00 {
diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt
index e2ea59bbca93..2f7663bb69ff 100644
--- a/Documentation/devicetree/bindings/usb/usb-xhci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt
@@ -32,6 +32,11 @@ Optional properties:
- usb3-lpm-capable: determines if platform is USB3 LPM capable
- quirk-broken-port-ped: set if the controller has broken port disable mechanism
- imod-interval-ns: default interrupt moderation interval is 5000ns
+ - phys : see usb-hcd.txt in the current directory
+
+additionally the properties from usb-hcd.txt (in the current directory) are
+supported.
+
Example:
usb@f0931000 {
--
2.16.2
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
