On 2/21/2018 11:00 AM, Tero Kristo wrote:
On 20/02/18 17:52, Rob Herring wrote:
On Mon, Feb 19, 2018 at 12:21 AM, Tero Kristo <t-kristo@xxxxxx> wrote:
On 19/02/18 05:10, Rob Herring wrote:
On Tue, Feb 13, 2018 at 07:15:29PM +0200, Tero Kristo wrote:
Certain revisions of the TI EMIF IP contain ECC support in them.
Reflect
this in the DT binding. Also, add interrupts property as a required
property for the emif controller, as all revisions of the emif IP
contain
interrupt support; this might remain unused by the kernel driver
though.
Signed-off-by: Tero Kristo <t-kristo@xxxxxx>
---
.../devicetree/bindings/memory-controllers/ti/emif.txt | 13
++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git
a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt
b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt
index 621b41c..87022a9 100644
--- a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt
@@ -3,7 +3,9 @@
EMIF - External Memory Interface - is an SDRAM controller used in
TI SoCs. EMIF supports, based on the IP revision, one or more of
DDR2/DDR3/LPDDR2 protocols. This binding describes a given instance
-of the EMIF IP and memory parts attached to it.
+of the EMIF IP and memory parts attached to it. Certain revisions
+of the EMIF controller also contain optional ECC support, which
+corrects one bit errors and detects two bit errors.
Required properties:
- compatible : Should be of the form "ti,emif-<ip-rev>" where
<ip-rev>
@@ -11,6 +13,8 @@ Required properties:
compatible should be one of the following:
"ti,emif-am3352"
"ti,emif-am4372"
+ "ti,emif-dra7xx"
+ "ti,emif-keystone"
- phy-type : <u32> indicating the DDR phy type. Following are
the
allowed values
@@ -22,6 +26,7 @@ Required properties:
- ti,hwmods : For TI hwmods processing and omap device creation
the value shall be "emif<n>" where <n> is the number of the EMIF
instance with base 1.
+- interrupts : interrupt used by the controller
Only for the new compatibles?
I added this as required property for all, as all EMIF versions
actually do
have IRQ. Should this still be marked as optional as only certain
versions
of the driver use it? On am3/am4 only it is optional right now, and
not used
by the existing driver. On omap4 and omap5 it is required also (list of
compatibles for the binding seem to be missing these actually;
ti,emif-4d
and ti,emif-4d5.)
Either way, I can mark this as optional property for am3/am4 if you
want (I
actually asked this already before but did not get clear response),
what is
your final take on this?
Okay. I'm fine if it is required. You're going to update all the dts
files, right?
Yeah, I will post patches for those, thanks for review.
Let me know if you have already posted the follow up series ?
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
