Re: [PATCH v7 4/9] arm: OMAP: Move dmtimer driver out of plat-omap to drivers under clocksource

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Tuesday 13 February 2018 07:54 AM, Suman Anna wrote:
> Hi Keerthy,
> 
> On 01/09/2018 12:23 AM, J, KEERTHY wrote:
>> Move the dmtimer driver out of plat-omap to clocksource.
>> So that non-omap devices also could use this.
> 
> What non-omap devices do you have in mind? I don't think this driver is
> ready for that yet. It still has a lot of OMAP dependencies. So you
> should defer this for later along with the rest of the cleanup and when
> the driver is ready for that.

I mean non-omap TI devices. Not totally generic one.

> 
>>
>> No Code changes done to the driver file only renamed to timer-dm.c.
>> Also removed the config dependencies for OMAP_DM_TIMER.
>>
>> Signed-off-by: Keerthy <j-keerthy@xxxxxx>
>> Reviewed-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
>> Tested-by: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
>> ---
>>   arch/arm/plat-omap/Kconfig                                     | 6 ------
>>   arch/arm/plat-omap/Makefile                                    | 1 -
>>   drivers/clocksource/Kconfig                                    | 3 +++
>>   drivers/clocksource/Makefile                                   | 1 +
>>   arch/arm/plat-omap/dmtimer.c => drivers/clocksource/timer-dm.c | 0
>>   5 files changed, 4 insertions(+), 7 deletions(-)
>>   rename arch/arm/plat-omap/dmtimer.c => drivers/clocksource/timer-dm.c (100%)
>>
>> diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
>> index 7276afe..afc1a1d 100644
>> --- a/arch/arm/plat-omap/Kconfig
>> +++ b/arch/arm/plat-omap/Kconfig
>> @@ -106,12 +106,6 @@ config OMAP3_L2_AUX_SECURE_SERVICE_SET_ID
>>           help
>>             PPA routine service ID for setting L2 auxiliary control register.
>>
>> -config OMAP_DM_TIMER
>> -       bool "Use dual-mode timer"
>> -       depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
>> -       help
>> -        Select this option if you want to use OMAP Dual-Mode timers.
>> -
>>   config OMAP_SERIAL_WAKE
>>           bool "Enable wake-up events for serial ports"
>>           depends on ARCH_OMAP1 && OMAP_MUX
>> diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
>> index 47e1867..7215ada 100644
>> --- a/arch/arm/plat-omap/Makefile
>> +++ b/arch/arm/plat-omap/Makefile
>> @@ -9,5 +9,4 @@ obj-y := sram.o dma.o counter_32k.o
>>
>>   # omap_device support (OMAP2+ only at the moment)
>>
>> -obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
>>   obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o
>> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
>> index c729a88..3f799b2 100644
>> --- a/drivers/clocksource/Kconfig
>> +++ b/drivers/clocksource/Kconfig
>> @@ -21,6 +21,9 @@ config CLKEVT_I8253
>>   config I8253_LOCK
>>           bool
>>
>> +config OMAP_DM_TIMER
>> +       bool
>> +
>>   config CLKBLD_I8253
>>           def_bool y if CLKSRC_I8253 || CLKEVT_I8253 || I8253_LOCK
>>
>> diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
>> index 72711f1..27b5497 100644
>> --- a/drivers/clocksource/Makefile
>> +++ b/drivers/clocksource/Makefile
>> @@ -16,6 +16,7 @@ obj-$(CONFIG_EM_TIMER_STI)    += em_sti.o
>>   obj-$(CONFIG_CLKBLD_I8253)      += i8253.o
>>   obj-$(CONFIG_CLKSRC_MMIO)       += mmio.o
>>   obj-$(CONFIG_DIGICOLOR_TIMER)   += timer-digicolor.o
>> +obj-$(CONFIG_OMAP_DM_TIMER)    += timer-dm.o
>>   obj-$(CONFIG_DW_APB_TIMER)      += dw_apb_timer.o
>>   obj-$(CONFIG_DW_APB_TIMER_OF)   += dw_apb_timer_of.o
>>   obj-$(CONFIG_FTTMR010_TIMER)    += timer-fttmr010.o
>> diff --git a/arch/arm/plat-omap/dmtimer.c b/drivers/clocksource/timer-dm.c
>> similarity index 100%
>> rename from arch/arm/plat-omap/dmtimer.c
>> rename to drivers/clocksource/timer-dm.c
> 
> Similar comments as in patch 3 about the file name at the top, and the
> question about adding omap to the file name.

I will go with timer-ti-dm.c following timer-ti-32k.c
Hope that is okay.

> 
> Also, I see that omap_dm_timer_get_fclk() is only defined for
> !CONFIG_ARCH_OMAP1, but currently the function is declared in the header
> file for both OMAP1 and OMAP2. You would want to inline that for OMAP1
> in the header file (we currently get away with it because no one uses it).

Sure.

> 
> regards
> Suman
> 
>> -- 
>> 1.9.1
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux