Hi On Sun, Feb 4, 2018 at 12:03 AM, Andreas Kemnade <andreas@xxxxxxxxxxxx> wrote: > Hi, > > I booted a 4.15 kernel without udev and loaded modules piece by piece to analyze > pm problems. modprobe ehci-omap increases current by around 35mA and > also rmmod ehci-omap does not let it go down at all. > > I expect that removing hardware does the same thing > > Also suspend current increases by around 15mA if that module is loaded. > I tested with having everything disabled which is attached to that usb bus. > Do you have an LTE connected to the usb? Michael > System was > GTA04A5 (with dm3730 processor and usb3322 phy) > > I know it has worked once, but I do not remember the version. > > The kernel config used can be found here: > http://misc.andi.de1.cc/config-4.15.gz > > Regards > Andreas > BTW: I am at the FOSDEM, will probably spend a lot of time in the > hw enablement devroom. So maybe ideas could be discussed directly. > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- | Michael Nazzareno Trimarchi Amarula Solutions BV | | COO - Founder Cruquiuskade 47 | | +31(0)851119172 Amsterdam 1018 AM NL | | [`as] http://www.amarulasolutions.com | -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
