Hi! > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/media/ti-wl1273.txt > > @@ -0,0 +1,36 @@ > > +Texas Instruments - wl1273 radio/bluetooth module > > bluetooth chips have a binding location: bindings/net/bluetooth. > > And we already have a WL1273 binding. Plus there's the one for the Nokia > BT which I think can be TI chips with a different firmware and protocol. > Is this related? Ok, let me investigate wl1273 (and postpone it, audio is critical, FM radio -- not so much). > > index 0000000..230b1eb > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/sound/nokia,n9.txt > > @@ -0,0 +1,32 @@ > > +* Nokia N9/N950 audio setup > > + > > +Required properties: > > +- compatible: "nokia,n9-audio" > > + > > +- nokia,twl4030-cpu-dai: phandle for the McBSP node connected to TWL4030 > > +- nokia,tlv320dac33-cpu-dai: phandle for the McBSP node connected to TLV320DAC33 > > +- nokia,wl1273-cpu-dai: phandle for the McBSP node connected to WL1273 > > + > > +- nokia,twl4030-codec: phandle for the TWL4030 codec > > +- nokia,tlv320dac33-codec: phandle for the TLV320DAC33 codec > > +- nokia,wl1273-codec: phandle for the WL1273 codec > > Both dais and codecs should just be lists with a defined order. > > > +- nokia,headphone-amplifier: phandle for the TPA6130A2 node > > The simple card or graph card binding don't work? At least follow them > to the extent that they do work. Yep, that quite big changes for the driver... Thanks for pointers. I'm not sure what features simple card / graph card miss. > > +Texas Instruments - tlv320dac33 Codec module > > + > > +The tlv320dac33 serial control bus communicates through I2C protocols. > > + > > +Required properties: > > + > > +- compatible - "ti,tlv320dac33" > > +- reg - I2C slave address > > + > > +Optional properties: > > + > > +- power-gpio - gpio pin to power the device > > power-gpios. > > Active high or low? Ok, this one can be fixed easily, and I guess tlv320dac33 driver might be useful for someone else, so I'll try to merge it first. Thanks for review, > > + ti,burst-bclkdiv = /bits/ 8 <3>; Oh and I'll make this plain int. No need to play with bits. Best regards Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Attachment:
signature.asc
Description: Digital signature
