On Wed, Jan 17, 2018 at 9:15 AM, Adam Ford <aford173@xxxxxxxxx> wrote:
> On Wed, Jan 17, 2018 at 8:02 AM, Tero Kristo <t-kristo@xxxxxx> wrote:
>> On 17/01/18 15:27, Adam Ford wrote:
>>>
>>> On Sat, Mar 11, 2017 at 6:50 AM, Tero Kristo <t-kristo@xxxxxx> wrote:
>>>>
>>>> Currently, TI clock driver uses an encapsulated struct that is cast into
>>>> a void pointer to store all register addresses. This can be considered
>>>> as rather nasty hackery, and prevents from expanding the register
>>>> address field also. Instead, replace all the code to use proper struct
>>>> in place for this, which contains all the previously used data.
>>>>
>>>> This patch is rather large as it is touching multiple files, but this
>>>> can't be split up as we need to avoid any boot breakage.
>>>>
>>>
>>> I know it's late coming, but according to git bisect, this patch is
>>> causing some problems with Logic PD Torpedo 37xx Dev kit.
>>
>>
>> Oh reporting bugs is never too late, thanks for posting this out.
>>
>>>
>>> It it is a DM3730 that has a WL1283 chipset attached to the SDIO
>>> interface on MMC3. The driver seems to load properly, but when
>>> loading wpa_supplicant to activate the WL1283, we get a giant crash.
>>> I checked kernel revisions starting at 4.14 and working back to when
>>> it worked, then used git bisect from there.
>>>
>>> I am hoping it might be a simple fix for something that just needs to
>>> get added or tweaked in the device tree.
>>
>>
>> I don't have access to the specific hw, but can you try to dig out which
>> hwmod is causing the crash? Just print out the oh->name from the
>> _wait_softreset_complete. That would help root causing the issue.
>>
>
> With one small patch, I was able to make it work again.
>
> diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
> index 2dbd632..ed1f625 100644
> --- a/arch/arm/mach-omap2/omap_hwmod.c
> +++ b/arch/arm/mach-omap2/omap_hwmod.c
> @@ -477,7 +477,7 @@ static int _wait_softreset_complete(struct omap_hwmod *oh)
> int c = 0;
>
> sysc = oh->class->sysc;
> -
> +pr_warn("_wait_softreset_complete: %s\n", oh->name);
> if (sysc->sysc_flags & SYSS_HAS_RESET_STATUS)
> omap_test_timeout((omap_hwmod_read(oh, sysc->syss_offs)
> & SYSS_RESETDONE_MASK),
>
>
> This leads me to believe that the omap_test_timeout functions might
> not be working quite right.
>
> Here is the working log with the above patch:
>
> # wpa_supplicant -Dnl80211 -iwlan0 -c/etc/wpa_supplicant.conf -B
> [ 17.992858] _wait_softreset_complete: mmc1
> Successfully initialized wpa_supplicant
> rfkill: Cannot open RFKILL control device
> [ 18.239746] _wait_softreset_complete: mmc3
> [ 18.638580] _wait_softreset_complete: mmc3
> [ 18.657562] _wait_softreset_complete: mmc1
> [ 18.833374] wlcore: firmware booted (Rev 7.3.10.0.141)
> [ 18.878326] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
> # [ 19.526275] _wait_softreset_complete: mmc3
> [ 19.787322] _wait_softreset_complete: mmc3
> [ 20.544830] _wait_softreset_complete: mmc3
> [ 21.600433] _wait_softreset_complete: mmc1
> [ 21.619293] _wait_softreset_complete: i2c1
> [ 21.893341] _wait_softreset_complete: mmc3
> [ 22.362091] wlan0: authenticate with 70:3a:cb:5e:14:62
> [ 22.437713] wlan0: send auth to 70:3a:cb:5e:14:62 (try 1/3)
> [ 22.455139] wlan0: authenticated
> [ 22.471710] wlan0: associate with 70:3a:cb:5e:14:62 (try 1/3)
> [ 22.486206] wlan0: RX AssocResp from 70:3a:cb:5e:14:62 (capab=0x11 status=0 a
> id=3)
> [ 22.517303] wlan0: associated
> [ 22.521728] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>
> I doubled checked again without the patch and it crashes like shown
> below, so the debug is definately make something better.
>
> I haven't checked the 4.15-RC candidate yet, so I'll see if that's
> changed, and I'll let you know what I find.
>
4.15.0-rc8 appears to be fixed, but 4.14 is still broken without
debuging. If you have any ideas on what might be able to backport to
4.14.y, I am willing to try it.
adam
>> -Tero
>>
>
> adam
>>
>>>
>>>
>>>
>>> # wpa_supplicant -Dnl80211 -iwlan0 -c/etc/wpa_supplicant.conf -B
>>> Successfully initialized wpa_supplicant
>>> rfkill: Cannot open RFKILL control device
>>> [ 14.674011] Unhandled fault: external abort on non-linefetch (0x1028)
>>> at 0xfa
>>> 0ad014
>>> [ 14.682708] pgd = cc2ac000
>>> [ 14.685607] [fa0ad014] *pgd=48011452(bad)
>>> [ 14.689941] Internal error: : 1028 [#1] SMP ARM
>>> [ 14.694732] Modules linked in: arc4 wl12xx wlcore mac80211 cfg80211
>>> evdev joy
>>> dev snd_soc_omap_twl4030 omapfb cfbfillrect cfbimgblt leds_gpio cpufreq_dt
>>> cfbco
>>> pyarea led_class thermal_sys panel_dpi pwm_omap_dmtimer gpio_keys hwmon
>>> pwm_bl o
>>> map3_isp videobuf2_dma_contig videobuf2_memops videobuf2_v4l2
>>> videobuf2_core v4l
>>> 2_common snd_soc_omap_mcbsp snd_soc_omap omap_wdt videodev media omap_hdq
>>> wlcore
>>> _sdio wire cn phy_twl4030_usb omap2430 musb_hdrc udc_core twl4030_wdt
>>> rtc_twl sn
>>> d_soc_twl4030 ehci_omap snd_soc_core snd_pcm_dmaengine snd_pcm ehci_hcd
>>> snd_time
>>> r twl4030_pwrbutton ohci_omap3 twl4030_charger pwm_twl_led snd
>>> twl4030_keypad so
>>> undcore pwm_twl industrialio matrix_keymap ohci_hcd usbcore usb_common
>>> at24 tsc2
>>> 004 omap_ssi tsc200x_core nvmem_core hsi omapdss
>>> [ 14.766357] CPU: 0 PID: 174 Comm: wpa_supplicant Not tainted
>>> 4.11.0-rc1-00015
>>> -g6c0afb5 #1
>>> [ 14.774993] Hardware name: Generic OMAP36xx (Flattened Device Tree)
>>> [ 14.781646] task: cc8a8000 task.stack: cc8bc000
>>> [ 14.786468] PC is at _wait_softreset_complete+0x70/0x114
>>> [ 14.792083] LR is at _enable_sysc+0x30/0x238
>>> [ 14.796630] pc : [<c011fe00>] lr : [<c0120ce0>] psr: 40010093
>>> [ 14.796630] sp : cc8bdbd0 ip : c01288fc fp : 00000000
>>> [ 14.808715] r10: cc8bc000 r9 : c0b0225c r8 : 00002710
>>> [ 14.814239] r7 : 000346dc r6 : c0d20644 r5 : c0d202ac r4 : 00000000
>>> [ 14.821136] r3 : fa0ad014 r2 : fa0ad000 r1 : 00000000 r0 : c0d202ac
>>> [ 14.828033] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM
>>> Segment non
>>> e
>>> [ 14.835662] Control: 10c5387d Table: 8c2ac019 DAC: 00000051
>>> [ 14.841735] Process wpa_supplicant (pid: 174, stack limit = 0xcc8bc218)
>>>
>>> [snip what appears to be just memory dump or a bunch of numbers]
>>>
>>>
>>> [ 15.147277] [<c011fe00>] (_wait_softreset_complete) from [<c0120ce0>]
>>> (_enabl
>>> e_sysc+0x30/0x238)
>>> [ 15.156463] [<c0120ce0>] (_enable_sysc) from [<c012101c>]
>>> (_enable+0x134/0x25
>>> 8)
>>> [ 15.164215] [<c012101c>] (_enable) from [<c012172c>]
>>> (omap_hwmod_enable+0x28/
>>> 0x48)
>>> [ 15.172210] [<c012172c>] (omap_hwmod_enable) from [<c0122700>]
>>> (omap_device_e
>>> nable+0x3c/0x90)
>>> [ 15.181213] [<c0122700>] (omap_device_enable) from [<c0122764>]
>>> (_od_runtime_
>>> resume+0x10/0x38)
>>> [ 15.190338] [<c0122764>] (_od_runtime_resume) from [<c057fd24>]
>>> (__rpm_callba
>>> ck+0xc0/0x214)
>>> [ 15.199157] [<c057fd24>] (__rpm_callback) from [<c057fec8>]
>>> (rpm_callback+0x5
>>> 0/0x80)
>>> [ 15.207366] [<c057fec8>] (rpm_callback) from [<c057f980>]
>>> (rpm_resume+0x4b8/0
>>> x738)
>>> [ 15.215362] [<c057f980>] (rpm_resume) from [<c057fc4c>]
>>> (__pm_runtime_resume+
>>> 0x4c/0x64)
>>> [ 15.223846] [<c057fc4c>] (__pm_runtime_resume) from [<c065f538>]
>>> (__mmc_claim
>>> _host+0x174/0x1b8)
>>> [ 15.233062] [<c065f538>] (__mmc_claim_host) from [<bf2ce1e8>]
>>> (wl12xx_sdio_ra
>>> w_write+0x34/0x130 [wlcore_sdio])
>>> [ 15.243927] [<bf2ce1e8>] (wl12xx_sdio_raw_write [wlcore_sdio]) from
>>> [<bf604db
>>> 0>] (wlcore_set_partition+0xc4/0x4b0 [wlcore])
>>> [ 15.256042] [<bf604db0>] (wlcore_set_partition [wlcore]) from
>>> [<bf5fb840>] (w
>>> l12xx_set_power_on+0x80/0x144 [wlcore])
>>> [ 15.267517] [<bf5fb840>] (wl12xx_set_power_on [wlcore]) from
>>> [<bf5fed6c>] (wl
>>> 1271_op_add_interface+0x6ac/0x9c0 [wlcore])
>>> [ 15.280303] [<bf5fed6c>] (wl1271_op_add_interface [wlcore]) from
>>> [<bf518cd0>]
>>> (drv_add_interface+0x80/0x31c [mac80211])
>>> [ 15.293121] [<bf518cd0>] (drv_add_interface [mac80211]) from
>>> [<bf537690>] (ie
>>> ee80211_do_open+0x474/0x8d4 [mac80211])
>>> [ 15.304931] [<bf537690>] (ieee80211_do_open [mac80211]) from
>>> [<c06b8124>] (__
>>> dev_open+0xa8/0x110)
>>> [ 15.314300] [<c06b8124>] (__dev_open) from [<c06b83a8>]
>>> (__dev_change_flags+0
>>> x88/0x14c)
>>> [ 15.322784] [<c06b83a8>] (__dev_change_flags) from [<c06b8484>]
>>> (dev_change_f
>>> lags+0x18/0x48)
>>> [ 15.331695] [<c06b8484>] (dev_change_flags) from [<c07334f4>]
>>> (devinet_ioctl+
>>> 0x720/0x824)
>>> [ 15.340362] [<c07334f4>] (devinet_ioctl) from [<c0692d24>]
>>> (sock_ioctl+0x160/
>>> 0x318)
>>> [ 15.348449] [<c0692d24>] (sock_ioctl) from [<c02c7d8c>]
>>> (do_vfs_ioctl+0x90/0x
>>> a10)
>>> [ 15.356384] [<c02c7d8c>] (do_vfs_ioctl) from [<c02c8778>]
>>> (SyS_ioctl+0x6c/0x7
>>> c)
>>> [ 15.364105] [<c02c8778>] (SyS_ioctl) from [<c0107840>]
>>> (ret_fast_syscall+0x0/
>>> 0x1c)
>>> [ 15.372131] Code: e3120c01 e595205c e6f23073 1affffef (e5933000)
>>> [ 15.378601] ---[ end trace 6966c05397661217 ]---
>>> [ 15.383544] In-band Error seen by MPU at address 0
>>>
>>> [snip]
>>>
>>>
>>> There is much more data to dump after this, but I don't want to dump a
>>> bunch of noise if it isn't helpful.
>>>
>>>> Signed-off-by: Tero Kristo <t-kristo@xxxxxx>
>>>> Acked-by: Tony Lindgren <tony@xxxxxxxxxxx>
>>>> ---
>>>> arch/arm/mach-omap2/clkt2xxx_dpllcore.c | 3 +-
>>>> arch/arm/mach-omap2/clock.c | 2 +-
>>>> arch/arm/mach-omap2/clock.h | 2 ++
>>>> arch/arm/mach-omap2/cm.h | 5 +--
>>>> arch/arm/mach-omap2/cm2xxx.c | 9 ++---
>>>> arch/arm/mach-omap2/cm3xxx.c | 10 ++----
>>>> arch/arm/mach-omap2/cm_common.c | 2 +-
>>>> drivers/clk/ti/apll.c | 47 ++++++++++++-------------
>>>> drivers/clk/ti/autoidle.c | 18 +++++-----
>>>> drivers/clk/ti/clk-3xxx.c | 55
>>>> +++++++++++++++--------------
>>>> drivers/clk/ti/clk.c | 47 ++++++++++++-------------
>>>> drivers/clk/ti/clkt_dflt.c | 61
>>>> ++++++++++++---------------------
>>>> drivers/clk/ti/clkt_dpll.c | 6 ++--
>>>> drivers/clk/ti/clkt_iclk.c | 29 ++++++++--------
>>>> drivers/clk/ti/clock.h | 11 +++---
>>>> drivers/clk/ti/clockdomain.c | 8 -----
>>>> drivers/clk/ti/divider.c | 24 +++++++------
>>>> drivers/clk/ti/dpll.c | 48 ++++++++++----------------
>>>> drivers/clk/ti/dpll3xxx.c | 38 ++++++++++----------
>>>> drivers/clk/ti/dpll44xx.c | 14 ++++----
>>>> drivers/clk/ti/gate.c | 32 ++++++++---------
>>>> drivers/clk/ti/interface.c | 22 ++++++------
>>>> drivers/clk/ti/mux.c | 41 +++++++++-------------
>>>> include/linux/clk/ti.h | 46 +++++++++++++------------
>>>> 24 files changed, 264 insertions(+), 316 deletions(-)
>>>>
>>>
>>> [ snip]
>>>
>>>
>>>> + s16 *prcm_inst, u8
>>>> *idlest_reg_id);
>>>> };
>>>>
>>>> #define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw)
>>>> --
>>>> 1.9.1
>>>>
>>>> --
>>>> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
>>>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>>
>> --
>> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
>> Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
