Hi,
On 2018-01-15 20:55, Tony Lindgren wrote:
> * Mark Brown <broonie@xxxxxxxxxx> [180115 18:14]:
>> On Mon, Jan 15, 2018 at 10:06:26AM -0800, Tony Lindgren wrote:
>>> * Mark Brown <broonie@xxxxxxxxxx> [180115 17:56]:
>>
>>>> Sorry, I didn't actually post it - just suggested adding the
>>>> snd_soc_codec_set_regmap() call.
>>
>>> Oh I see. Yeah that seems like a good long term solution after
>>> the regressions are fixed.
>>
>> I would like to see us do that sooner rather than later assuming it
>> addresses the issue, it's quicker and simpler.
>
> Peter, can you take a look at that?
Sorry I have missed the thread...
>
> Meanwhile, here's a regression fix for Linux next for twl4030
> and 6040 drivers.
The .read and the .write in snd_soc_codec_driver is needed. Without it
DAPM can not read/write to registers when we have codec driver which
does not have regmap. twl4030/6040 is an MFD device and the regmap is
owned by the mfd driver, the codec, vibra, gpio, clk, etc sub devices
are using callbacks to do IO.
I will look at the local caching, but afaik it was needed and can not be
done in regmap or mfd level.
I will also take a look at the dac33 driver to see if it is broken, but
I don't have Nokia n9/n950 where I could test it.
Acked-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
>
> Regards,
>
> Tony
>
> 8< ---------------------
> From tony Mon Sep 17 00:00:00 2001
> From: Tony Lindgren <tony@xxxxxxxxxxx>
> Date: Fri, 12 Jan 2018 10:24:36 -0800
> Subject: [PATCH] ASoC: Fix twl4030 and 6040 regression by adding back read
> and write
>
> Commit 3bb0f7c31b1a ("ASoC: don't use snd_soc_write/read on twl4030")
> caused regressions for both twl4030 and twl6040 as it assumes the
> ASoC driver is using regmap. As a side effect, this also causes a
> considerable increase in idle power consumption omap3 boards using
> twl4030 as the PMIC.
>
> This is because the removal of read and write function pointers
> causes some of the ASoC IO functions to not do anything. For example,
> snd_soc_register_card() calls snd_soc_dapm_new_widgets() that calls
> snd_soc_codec_drv_read() that now does nothing.
>
> A long term solution suggested by Mark Brown <broonie@xxxxxxxxxx>
> is to make the twl drivers use regmap by adding a call to
> snd_soc_codec_set_regmap(). This however needs more consideration
> as currently the driver internal reads do caching and we would have
> both regmap access and internal read/write access accessing the same
> hardware registers.
>
> So to fix the regression, let's just do a partial revert adding back
> the read and write function pointers. Note that other non-regmap
> ASoC drivers may need similar patches.
>
> Fixes: 3bb0f7c31b1a ("ASoC: don't use snd_soc_write/read on twl4030")
> Fixes: 93a00c467fe9 ("ASoC: don't use snd_soc_write/read on twl6040")
> Cc: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
> Cc: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
> Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
> ---
> sound/soc/codecs/twl4030.c | 2 ++
> sound/soc/codecs/twl6040.c | 2 ++
> 2 files changed, 4 insertions(+)
>
> diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c
> --- a/sound/soc/codecs/twl4030.c
> +++ b/sound/soc/codecs/twl4030.c
> @@ -2195,6 +2195,8 @@ static int twl4030_soc_remove(struct snd_soc_codec *codec)
> static const struct snd_soc_codec_driver soc_codec_dev_twl4030 = {
> .probe = twl4030_soc_probe,
> .remove = twl4030_soc_remove,
> + .read = twl4030_read,
> + .write = twl4030_write,
> .set_bias_level = twl4030_set_bias_level,
> .idle_bias_off = true,
>
> diff --git a/sound/soc/codecs/twl6040.c b/sound/soc/codecs/twl6040.c
> --- a/sound/soc/codecs/twl6040.c
> +++ b/sound/soc/codecs/twl6040.c
> @@ -1158,6 +1158,8 @@ static int twl6040_remove(struct snd_soc_codec *codec)
> static const struct snd_soc_codec_driver soc_codec_dev_twl6040 = {
> .probe = twl6040_probe,
> .remove = twl6040_remove,
> + .read = twl6040_read,
> + .write = twl6040_write,
> .set_bias_level = twl6040_set_bias_level,
> .suspend_bias_off = true,
> .ignore_pmdown_time = true,
>
- Péter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
