Re: [PATCH v7 5/8] can: m_can: Add PM Support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 01/10/2018 11:55 AM, Faiz Abbas wrote:
> From: Franklin S Cooper Jr <fcooper@xxxxxx>
> 
> Add support for CONFIG_PM which is the new way to handle managing clocks.
> 
> Move the clock management to pm_runtime_resume() and pm_runtime_suspend()
> callbacks for the driver.
> 
> CONFIG_PM is required by OMAP based devices to handle clock management.
> Therefore, this allows future Texas Instruments SoCs that have the MCAN IP
> to work with this driver.
> 
> Reviewed-by: Suman Anna <s-anna@xxxxxx>
> Signed-off-by: Franklin S Cooper Jr <fcooper@xxxxxx>
> [nsekhar@xxxxxx: handle pm_runtime_get_sync() failure, fix some bugs]
> Signed-off-by: Sekhar Nori <nsekhar@xxxxxx>
> Signed-off-by: Faiz Abbas <faiz_abbas@xxxxxx>
> ---
>  drivers/net/can/m_can/m_can.c | 95 ++++++++++++++++++++++++++++---------------
>  1 file changed, 62 insertions(+), 33 deletions(-)
> 
> diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
> index 07ebe7f..f5c5028 100644
> --- a/drivers/net/can/m_can/m_can.c
> +++ b/drivers/net/can/m_can/m_can.c
> @@ -23,6 +23,7 @@
>  #include <linux/of.h>
>  #include <linux/of_device.h>
>  #include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
>  #include <linux/iopoll.h>
>  #include <linux/can/dev.h>
>  
> @@ -625,21 +626,16 @@ static int m_can_clk_start(struct m_can_priv *priv)
>  {
>  	int err;
>  
> -	err = clk_prepare_enable(priv->hclk);
> -	if (err)
> -		return err;
> -
> -	err = clk_prepare_enable(priv->cclk);
> +	err = pm_runtime_get_sync(priv->device);
>  	if (err)
> -		clk_disable_unprepare(priv->hclk);
> +		pm_runtime_put_noidle(priv->device);
>  
>  	return err;
>  }
>  
>  static void m_can_clk_stop(struct m_can_priv *priv)
>  {
> -	clk_disable_unprepare(priv->cclk);
> -	clk_disable_unprepare(priv->hclk);
> +	pm_runtime_put_sync(priv->device);
>  }
>  
>  static int m_can_get_berr_counter(const struct net_device *dev,
> @@ -1561,37 +1557,26 @@ static int m_can_plat_probe(struct platform_device *pdev)
>  		goto failed_ret;
>  	}
>  
> -	/* Enable clocks. Necessary to read Core Release in order to determine
> -	 * M_CAN version
> -	 */
> -	ret = clk_prepare_enable(hclk);
> -	if (ret)
> -		goto disable_hclk_ret;
> -
> -	ret = clk_prepare_enable(cclk);
> -	if (ret)
> -		goto disable_cclk_ret;
> -
>  	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "m_can");
>  	addr = devm_ioremap_resource(&pdev->dev, res);
>  	irq = platform_get_irq_byname(pdev, "int0");
>  
>  	if (IS_ERR(addr) || irq < 0) {
>  		ret = -EINVAL;
> -		goto disable_cclk_ret;
> +		goto failed_ret;
>  	}
>  
>  	/* message ram could be shared */
>  	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "message_ram");
>  	if (!res) {
>  		ret = -ENODEV;
> -		goto disable_cclk_ret;
> +		goto failed_ret;
>  	}
>  
>  	mram_addr = devm_ioremap(&pdev->dev, res->start, resource_size(res));
>  	if (!mram_addr) {
>  		ret = -ENOMEM;
> -		goto disable_cclk_ret;
> +		goto failed_ret;
>  	}
>  
>  	/* get message ram configuration */
> @@ -1600,7 +1585,7 @@ static int m_can_plat_probe(struct platform_device *pdev)
>  					 sizeof(mram_config_vals) / 4);
>  	if (ret) {
>  		dev_err(&pdev->dev, "Could not get Message RAM configuration.");
> -		goto disable_cclk_ret;
> +		goto failed_ret;
>  	}
>  
>  	/* Get TX FIFO size
> @@ -1612,13 +1597,9 @@ static int m_can_plat_probe(struct platform_device *pdev)
>  	dev = alloc_candev(sizeof(*priv), tx_fifo_size);
>  	if (!dev) {
>  		ret = -ENOMEM;
> -		goto disable_cclk_ret;
> +		goto failed_ret;
>  	}
>  
> -	ret = setup_m_can_dev(pdev, dev, addr);
> -	if (ret)
> -		goto disable_cclk_ret;
> -
>  	priv = netdev_priv(dev);
>  	dev->irq = irq;
>  	priv->device = &pdev->dev;
> @@ -1632,6 +1613,20 @@ static int m_can_plat_probe(struct platform_device *pdev)
>  	platform_set_drvdata(pdev, dev);
>  	SET_NETDEV_DEV(dev, &pdev->dev);
>  
> +	/* Enable clocks. Necessary to read Core Release in order to determine
> +	 * M_CAN version
> +	 */
> +	pm_runtime_enable(&pdev->dev);
> +	ret = pm_runtime_get_sync(&pdev->dev);

Why don't you make use of m_can_clk_start() here?

> +	if (ret)  {
> +		pm_runtime_put_noidle(&pdev->dev);
> +		goto pm_runtime_fail;
> +	}
> +
> +	ret = setup_m_can_dev(pdev, dev, addr);
> +	if (ret)
> +		goto pm_runtime_put;
> +
>  	ret = register_m_can_dev(dev);
>  	if (ret) {
>  		dev_err(&pdev->dev, "registering %s failed (err=%d)\n",
> @@ -1650,14 +1645,15 @@ static int m_can_plat_probe(struct platform_device *pdev)
>  	 * Stop clocks. They will be reactivated once the M_CAN device is opened
>  	 */
>  
> -	goto disable_cclk_ret;
> +	goto pm_runtime_put;
>  
>  failed_free_dev:
>  	free_m_can_dev(dev);
> -disable_cclk_ret:
> -	clk_disable_unprepare(cclk);
> -disable_hclk_ret:
> -	clk_disable_unprepare(hclk);
> +pm_runtime_put:
> +	pm_runtime_put_sync(&pdev->dev);
> +pm_runtime_fail:
> +	if (ret)
> +		pm_runtime_disable(&pdev->dev);
>  failed_ret:
>  	return ret;
>  }
> @@ -1715,6 +1711,9 @@ static int m_can_plat_remove(struct platform_device *pdev)
>  	struct net_device *dev = platform_get_drvdata(pdev);
>  
>  	unregister_m_can_dev(dev);
> +
> +	pm_runtime_disable(&pdev->dev);
> +
>  	platform_set_drvdata(pdev, NULL);
>  
>  	free_m_can_dev(dev);
> @@ -1722,7 +1721,37 @@ static int m_can_plat_remove(struct platform_device *pdev)
>  	return 0;
>  }
>  
> +int m_can_runtime_suspend(struct device *dev)
> +{
> +	struct net_device *ndev = dev_get_drvdata(dev);
> +	struct m_can_priv *priv = netdev_priv(ndev);
> +
> +	clk_disable_unprepare(priv->cclk);
> +	clk_disable_unprepare(priv->hclk);
> +
> +	return 0;
> +}
> +
> +int m_can_runtime_resume(struct device *dev)
> +{
> +	struct net_device *ndev = dev_get_drvdata(dev);
> +	struct m_can_priv *priv = netdev_priv(ndev);
> +	int err;
> +
> +	err = clk_prepare_enable(priv->hclk);
> +	if (err)
> +		return err;
> +
> +	err = clk_prepare_enable(priv->cclk);
> +	if (err)
> +		clk_disable_unprepare(priv->hclk);
> +
> +	return err;
> +}
> +
>  static const struct dev_pm_ops m_can_pmops = {
> +	SET_RUNTIME_PM_OPS(m_can_runtime_suspend,
> +			   m_can_runtime_resume, NULL)
>  	SET_SYSTEM_SLEEP_PM_OPS(m_can_suspend, m_can_resume)
>  };
>  
> 

Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |

Attachment: signature.asc
Description: OpenPGP digital signature


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux