INT pin (gpio_irq) is not really needed for DMA but only for notification
when a command that needs wait has completed. DMA memcpy can be still used
even without gpio_irq available, so enable it unconditionally.
Signed-off-by: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
Tested-by: Tony Lindgren <tony@xxxxxxxxxxx>
Tested-by: Aaro Koskinen <aaro.koskinen@xxxxxx>
---
Changes in v6: None
Changes in v5:
- rename patch and fix commit message
Changes in v4:
- new patch
Changes in v3: None
Changes in v2: None
drivers/mtd/onenand/omap2.c | 52 ++++++++++++++++++---------------------------
1 file changed, 21 insertions(+), 31 deletions(-)
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index e4857a41760d..1cd78a076759 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -152,17 +152,13 @@ static int omap2_onenand_wait(struct mtd_info *mtd, int state)
}
reinit_completion(&c->irq_done);
- if (c->gpio_irq) {
- result = gpio_get_value(c->gpio_irq);
- if (result == -1) {
- ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS);
- intr = read_reg(c, ONENAND_REG_INTERRUPT);
- wait_err("gpio error", state, ctrl, intr);
- return -EIO;
- }
- } else
- result = 0;
- if (result == 0) {
+ result = gpio_get_value(c->gpio_irq);
+ if (result < 0) {
+ ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS);
+ intr = read_reg(c, ONENAND_REG_INTERRUPT);
+ wait_err("gpio error", state, ctrl, intr);
+ return -EIO;
+ } else if (result == 0) {
int retry_cnt = 0;
retry:
if (!wait_for_completion_io_timeout(&c->irq_done,
@@ -450,6 +446,7 @@ static void omap2_onenand_shutdown(struct platform_device *pdev)
static int omap2_onenand_probe(struct platform_device *pdev)
{
+ dma_cap_mask_t mask;
struct omap_onenand_platform_data *pdata;
struct omap2_onenand *c;
struct onenand_chip *this;
@@ -513,31 +510,25 @@ static int omap2_onenand_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "Failed to request GPIO%d for "
"OneNAND\n", c->gpio_irq);
goto err_iounmap;
- }
- gpio_direction_input(c->gpio_irq);
+ }
+ gpio_direction_input(c->gpio_irq);
- if ((r = request_irq(gpio_to_irq(c->gpio_irq),
- omap2_onenand_interrupt, IRQF_TRIGGER_RISING,
- pdev->dev.driver->name, c)) < 0)
- goto err_release_gpio;
- }
+ if ((r = request_irq(gpio_to_irq(c->gpio_irq),
+ omap2_onenand_interrupt, IRQF_TRIGGER_RISING,
+ pdev->dev.driver->name, c)) < 0)
+ goto err_release_gpio;
- if (pdata->dma_channel >= 0) {
- dma_cap_mask_t mask;
+ this->wait = omap2_onenand_wait;
+ }
- dma_cap_zero(mask);
- dma_cap_set(DMA_MEMCPY, mask);
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_MEMCPY, mask);
- c->dma_chan = dma_request_channel(mask, NULL, NULL);
- if (!c->dma_chan)
- dev_info(&pdev->dev,
- "failed to allocate DMA for OneNAND, "
- "using PIO instead\n");
- }
+ c->dma_chan = dma_request_channel(mask, NULL, NULL);
dev_info(&pdev->dev, "initializing on CS%d, phys base 0x%08lx, virtual "
- "base %p, freq %d MHz\n", c->gpmc_cs, c->phys_base,
- c->onenand.base, c->freq);
+ "base %p, freq %d MHz, %s mode\n", c->gpmc_cs, c->phys_base,
+ c->onenand.base, c->freq, c->dma_chan ? "DMA" : "PIO");
c->pdev = pdev;
c->mtd.priv = &c->onenand;
@@ -547,7 +538,6 @@ static int omap2_onenand_probe(struct platform_device *pdev)
this = &c->onenand;
if (c->dma_chan) {
- this->wait = omap2_onenand_wait;
this->read_bufferram = omap2_onenand_read_bufferram;
this->write_bufferram = omap2_onenand_write_bufferram;
}
--
2.15.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
