Compatible property is required for OMAP2+ mtd driver. Also
add INT pin gpio description and delete unused dma-channel
property.
Signed-off-by: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
Acked-by: Roger Quadros <rogerq@xxxxxx>
---
Changes in v6: None
Changes in v5:
- renamed R/B pin to INT pin
Changes in v4:
- new patch
Changes in v3: None
Changes in v2: None
Documentation/devicetree/bindings/mtd/gpmc-onenand.txt | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt b/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt
index b6e8bfd024f4..e9f01a963a0a 100644
--- a/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt
@@ -9,13 +9,14 @@ Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
Required properties:
+ - compatible: "ti,omap2-onenand"
- reg: The CS line the peripheral is connected to
- - gpmc,device-width Width of the ONENAND device connected to the GPMC
+ - gpmc,device-width: Width of the ONENAND device connected to the GPMC
in bytes. Must be 1 or 2.
Optional properties:
- - dma-channel: DMA Channel index
+ - int-gpios: GPIO specifier for the INT pin.
For inline partition table parsing (optional):
@@ -35,6 +36,7 @@ Example for an OMAP3430 board:
#size-cells = <1>;
onenand@0 {
+ compatible = "ti,omap2-onenand";
reg = <0 0 0>; /* CS0, offset 0 */
gpmc,device-width = <2>;
--
2.15.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
