Hi, On 1/10/2018 6:18 PM, Roger Quadros wrote: > Hi Manu, > > On 27/09/17 14:19, Manu Gautam wrote: >> Driver powers-off PHYs and reinitializes DWC3 core and gadget on >> resume. While this works fine for gadget mode but in host >> mode there is not re-initialization of host stack. Also, resetting >> bus as part of bus_suspend/resume is not correct which could affect >> (or disconnect) connected devices. >> Fix this by not reinitializing core on suspend/resume in host mode >> for HOST only and OTG/drd configurations. >> > All this seems correct but we (TI) were relying on dwc3_core_exit() to be called > during dwc3_suspend() to have the lowest power state for our platforms. > > After this patch, DWC3 controller and PHYs won't be turned off thus > preventing our platform from reaching low power levels. > > So this is a regression for us (TI) in v4.15-rc. > > Felipe, do you agree? > > If yes I can send a patch which fixes the regression > and also makes USB host work after suspend/resume. > I think it will be better to separate runtime_suspend and pm_suspend handling for host mode in dwc3. Powering offf/on PHYs and dwc3_core_exit/init across system suspend-resume should be ok but doing that for runtime suspend-resume is not correct. Let me know if that sounds ok, I can provide a patch for same instead of reverting this which affects runtime PM with dwc3 host. Also, we need to consider dwc3 in Host mode with dr_mode as DRD/OTG similar to dr_mode as HOST. -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
