Re: [PATCH v2 2/3] dt-bindings: PCI: dra7xx: Add properties to enable x2 lane in dra7

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



* Rob Herring <robh@xxxxxxxxxx> [171226 17:49]:
> On Fri, Dec 22, 2017 at 12:24 PM, Tony Lindgren <tony@xxxxxxxxxxx> wrote:
> > * Kishon Vijay Abraham I <kishon@xxxxxx> [171222 06:06]:
> >> Hi Rob,
> >>
> >> On Thursday 21 December 2017 12:27 AM, Rob Herring wrote:
> >> > On Tue, Dec 19, 2017 at 02:28:22PM +0530, Kishon Vijay Abraham I wrote:
> >> >> Add syscon properties required for configuring PCIe in x2 lane mode.
> >> >>
> >> >> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
> >> >> Signed-off-by: Sekhar Nori <nsekhar@xxxxxx>
> >> >> ---
> >> >>  Documentation/devicetree/bindings/pci/ti-pci.txt | 6 ++++++
> >> >>  1 file changed, 6 insertions(+)
> >> >>
> >> >> diff --git a/Documentation/devicetree/bindings/pci/ti-pci.txt b/Documentation/devicetree/bindings/pci/ti-pci.txt
> >> >> index 82cb875e4cec..bfbc77ac7355 100644
> >> >> --- a/Documentation/devicetree/bindings/pci/ti-pci.txt
> >> >> +++ b/Documentation/devicetree/bindings/pci/ti-pci.txt
> >> >> @@ -13,6 +13,12 @@ PCIe DesignWare Controller
> >> >>   - ti,hwmods : Name of the hwmod associated to the pcie, "pcie<X>",
> >> >>           where <X> is the instance number of the pcie from the HW spec.
> >> >>   - num-lanes as specified in ../designware-pcie.txt
> >> >> + - ti,syscon-lane-conf : phandle/offset pair. Phandle to the system control
> >> >> +                   module and the register offset to specify 1 lane or
> >> >> +                   2 lane.
> >> >> + - ti,syscon-lane-sel : phandle/offset pair. Phandle to the system control
> >> >> +                  module and the register offset to specify lane
> >> >> +                  selection.
> >> >
> >> > Adding a property for every syscon register doesn't really scale and
> >> > doesn't work if the register layout changes.
> >>
> >> The register layout doesn't really change between silicon revisions and for new
> >> SoCs, the phandle and the register offset for that SoC will have to be
> >> populated again.
> 
> And what about SoCs that don't exist yet?
> 
> >> Having said that, I'm not aware of any other alternative here.
> 
> What would you do if you had 20 different syscon registers to
> configure? Add 20 properties? No, you would have per SoC functions in
> the driver to handle the different cases.

Ideally these syscon registers would be managed by some Linux
generic framework such as clock/regulator/mux/phy.

But yeah, if that does not work, then setting a SoC specific
configuration function based on the compatible value makes sense
to me.

> > Sorry I did not realize this is still open. Sounds like I need to
> > revert commit 4ece93c020e3 ("ARM: dts: dra7: Add properties to
> > enable PCIe x2 lane mode"), let me know if that is not the case.
> 
> It's fine, I guess. Keep adding more syscon phandles and then I'll NAK
> it (if I remember :)).

Already reverted, thanks for the comments.

Regards,

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux