Use the correct IRQ gpio pin on the BeagleBone Blue to allow the
wl1835 wireless module to actually work.
Signed-off-by: Robert Nelson <robertcnelson@xxxxxxxxx>
CC: Jason Kridner <jkridner@xxxxxxxxxxxxxxx>
CC: Drew Fustini <drew@xxxxxxxxxxxxxxx>
CC: Tony Lindgren <tony@xxxxxxxxxxx>
---
arch/arm/boot/dts/am335x-boneblue.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts
index d5be9fc4f416..c5820919e709 100644
--- a/arch/arm/boot/dts/am335x-boneblue.dts
+++ b/arch/arm/boot/dts/am335x-boneblue.dts
@@ -216,7 +216,7 @@
wl18xx_pins: pinmux_wl18xx_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* (K18) gmii1_txclk.gpio3[9] - WL_EN */
- AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (H18) rmii1_refclk.gpio0[29] - WL_IRQ */
+ AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (K16) gmii1_txd1.gpio0[21] - WL_IRQ */
AM33XX_IOPAD(0x930, PIN_OUTPUT_PULLUP | MUX_MODE7) /* (L18) gmii1_rxclk.gpio3[10] - LS_BUF_EN */
>;
};
@@ -414,7 +414,7 @@
compatible = "ti,wl1835";
reg = <2>;
interrupt-parent = <&gpio0>;
- interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <21 IRQ_TYPE_EDGE_RISING>;
};
};
--
2.15.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
