Re: [PATCH v4 4/8] arm: OMAP: Move dmtimer driver out of plat-omap to drivers under clocksource

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Thursday 07 December 2017 04:24 PM, Daniel Lezcano wrote:
> On 01/12/2017 06:16, Keerthy wrote:
>> Move the dmtimer driver out of plat-omap to clocksource.
>> So that non-omap devices also could use this.
>>
>> No Code changes done to the driver file.
>>
>> Signed-off-by: Keerthy <j-keerthy@xxxxxx>
>> Reviewed-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
>> ---
>>
>> Changes in v3:
>>
>>   * Added Sebastian's Reviewed-by.
>>
>> Changes in v2:
>>
>>   * No code changes in this v2 version. Only enhanced patch
>>     statistics for renames.
>>
>>  arch/arm/plat-omap/Kconfig                            | 6 ------
>>  arch/arm/plat-omap/Makefile                           | 1 -
>>  drivers/clocksource/Kconfig                           | 6 ++++++
>>  drivers/clocksource/Makefile                          | 1 +
>>  {arch/arm/plat-omap => drivers/clocksource}/dmtimer.c | 0
>>  5 files changed, 7 insertions(+), 7 deletions(-)
>>  rename {arch/arm/plat-omap => drivers/clocksource}/dmtimer.c (100%)
> 
> Take the opportunity to rename it timer-dm.c

okay.

> 
>> diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
>> index 7276afe..afc1a1d 100644
>> --- a/arch/arm/plat-omap/Kconfig
>> +++ b/arch/arm/plat-omap/Kconfig
>> @@ -106,12 +106,6 @@ config OMAP3_L2_AUX_SECURE_SERVICE_SET_ID
>>  	help
>>  	  PPA routine service ID for setting L2 auxiliary control register.
>>  
>> -config OMAP_DM_TIMER
>> -	bool "Use dual-mode timer"
>> -	depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
>> -	help
>> -	 Select this option if you want to use OMAP Dual-Mode timers.
>> -
>>  config OMAP_SERIAL_WAKE
>>  	bool "Enable wake-up events for serial ports"
>>  	depends on ARCH_OMAP1 && OMAP_MUX
>> diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
>> index 47e1867..7215ada 100644
>> --- a/arch/arm/plat-omap/Makefile
>> +++ b/arch/arm/plat-omap/Makefile
>> @@ -9,5 +9,4 @@ obj-y := sram.o dma.o counter_32k.o
>>  
>>  # omap_device support (OMAP2+ only at the moment)
>>  
>> -obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
>>  obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o
>> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
>> index c729a88..4da66cf 100644
>> --- a/drivers/clocksource/Kconfig
>> +++ b/drivers/clocksource/Kconfig
>> @@ -46,6 +46,12 @@ config DIGICOLOR_TIMER
>>  	help
>>  	  Enables the support for the digicolor timer driver.
>>  
>> +config OMAP_DM_TIMER
>> +	bool "Use dual-mode timer"
>> +	depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
>> +	help
>> +	 Select this option if you want to use Dual-Mode timers.
>> +
> 
> So in the clocksource directory the rule is the following:
> 
> The config option is silent except if COMPILE_TEST is set.
> 
> It is the Kconfig's platform which select the driver so there is no deps
> on the ARCH.

Okay understood.

> 
> config OMAP_DM_TIMER
> 	bool "Use dual-mode timer" if COMPILE_TEST
> 	help
> 	 Select this option if you want to use Dual-Mode timers.
> 
> Here you will have to make sure the driver compiles on x86.

Okay. I will check that in my next version.

Thanks for reviewing!

> 
>>  config DW_APB_TIMER
>>  	bool "DW APB timer driver" if COMPILE_TEST
>>  	help
>> diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
>> index 72711f1..b077076 100644
>> --- a/drivers/clocksource/Makefile
>> +++ b/drivers/clocksource/Makefile
>> @@ -16,6 +16,7 @@ obj-$(CONFIG_EM_TIMER_STI)	+= em_sti.o
>>  obj-$(CONFIG_CLKBLD_I8253)	+= i8253.o
>>  obj-$(CONFIG_CLKSRC_MMIO)	+= mmio.o
>>  obj-$(CONFIG_DIGICOLOR_TIMER)	+= timer-digicolor.o
>> +obj-$(CONFIG_OMAP_DM_TIMER)	+= dmtimer.o
>>  obj-$(CONFIG_DW_APB_TIMER)	+= dw_apb_timer.o
>>  obj-$(CONFIG_DW_APB_TIMER_OF)	+= dw_apb_timer_of.o
>>  obj-$(CONFIG_FTTMR010_TIMER)	+= timer-fttmr010.o
>> diff --git a/arch/arm/plat-omap/dmtimer.c b/drivers/clocksource/dmtimer.c
>> similarity index 100%
>> rename from arch/arm/plat-omap/dmtimer.c
>> rename to drivers/clocksource/dmtimer.c
>>
> 
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux