* H. Nikolaus Schaller <hns@xxxxxxxxxxxxx> [171115 21:41]:
> GTA04 has a W2SG0004/84 connected to UART2 of the OMAP3
> processor. A GPIO can pulse the on/off toggle switch.
>
> The VSIM regulator is used to power on/off the LNA of an external
> active GPS antenna so that a driver can turn the LNA off if GPS is
> not needed to save battery energy.
>
> Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
> ---
> arch/arm/boot/dts/omap3-gta04.dtsi | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
> index 4504908c23fe..e967d738aaaf 100644
> --- a/arch/arm/boot/dts/omap3-gta04.dtsi
> +++ b/arch/arm/boot/dts/omap3-gta04.dtsi
> @@ -477,6 +477,12 @@
> &uart2 {
> pinctrl-names = "default";
> pinctrl-0 = <&uart2_pins>;
> +
> + gps: gps {
> + compatible = "wi2wi,w2sg0004";
> + lna-supply = <&vsim>; /* LNA regulator */
> + enable-gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>; /* GPIO_145: trigger for turning on/off w2sg0004 */
> + };
> };
How about move the comment above the node to avoid long lines?
Or just change it to gpio_145 for the comment as the property
is already enable-gpios?
Regards,
Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
