Hi,
On Thu, Nov 16, 2017 at 12:57:03PM +0100, Pavel Machek wrote:
> Hi!
>
> Ok, not for application, but I can get light sensor to work.
>
> Signed-off-by: Pavel Machek <pavel@xxxxxx>
There is no mainline user of this driver and it has a custom API, so
I think the driver should be dropped and an IIO based one should be
created instead.
-- Sebastian
> diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts
> index 50c4fc6..15841f7 100644
> --- a/arch/arm/boot/dts/omap3-n950.dts
> +++ b/arch/arm/boot/dts/omap3-n950.dts
> @@ -150,6 +150,23 @@
> };
> };
>
> + bh1770@38 {
> + compatible = "bh1770glc";
> + reg = <0x38>;
> +
> + vdd-supply = <&vaux1>;
> + leds-supply = <&vaux1>; /* FIXME: really on vbat */
> +
> + /* GPIO 83 on n950.
> + .leds = BHSFH_LED1,
> + .led_max_curr = BHSFH_LED_100mA,
> + .led_def_curr = BHSFH_LED_50mA,
> + .glass_attenuation = (16384 * 385) / 100, ... about 3.85x filtering
> + */
> + };
> +
> + /* Also TLV320DAC33 and TPA6130A2 */
> +
> touch@4b {
> compatible = "atmel,maxtouch";
> reg = <0x4b>;
> diff --git a/drivers/misc/bh1770glc.c b/drivers/misc/bh1770glc.c
> index 9c62bf0..f08df29 100644
> --- a/drivers/misc/bh1770glc.c
> +++ b/drivers/misc/bh1770glc.c
> @@ -22,6 +22,7 @@
> *
> */
>
> +#define DEBUG
> #include <linux/kernel.h>
> #include <linux/module.h>
> #include <linux/i2c.h>
> @@ -525,16 +526,22 @@ static int bh1770_detect(struct bh1770_chip *chip)
> s32 ret;
> u8 manu, part;
>
> + printk("Detect...\n");
> +
> ret = i2c_smbus_read_byte_data(client, BH1770_MANUFACT_ID);
> if (ret < 0)
> goto error;
> manu = (u8)ret;
>
> + printk("Detect... manufact\n");
> +
> ret = i2c_smbus_read_byte_data(client, BH1770_PART_ID);
> if (ret < 0)
> goto error;
> part = (u8)ret;
>
> + printk("Detect... part ... got %x %x\n", manu, part);
> +
> chip->revision = (part & BH1770_REV_MASK) >> BH1770_REV_SHIFT;
> chip->prox_coef = BH1770_COEF_SCALER;
> chip->prox_const = 0;
> @@ -1179,6 +1186,8 @@ static const struct attribute_group bh1770_attribute_group = {
> .attrs = sysfs_attrs
> };
>
> +struct bh1770_platform_data def = {};
> +
> static int bh1770_probe(struct i2c_client *client,
> const struct i2c_device_id *id)
> {
> @@ -1189,6 +1198,8 @@ static int bh1770_probe(struct i2c_client *client,
> if (!chip)
> return -ENOMEM;
>
> + printk("bh1770: probe\n");
> +
> i2c_set_clientdata(client, chip);
> chip->client = client;
>
> @@ -1198,10 +1209,12 @@ static int bh1770_probe(struct i2c_client *client,
>
> if (client->dev.platform_data == NULL) {
> dev_err(&client->dev, "platform data is mandatory\n");
> - return -EINVAL;
> + //return -EINVAL;
> }
>
> chip->pdata = client->dev.platform_data;
> + if (!chip->pdata)
> + chip->pdata = &def;
> chip->lux_calib = BH1770_LUX_NEUTRAL_CALIB_VALUE;
> chip->lux_rate_index = BH1770_LUX_DEFAULT_RATE;
> chip->lux_threshold_lo = BH1770_LUX_DEF_THRES;
> @@ -1220,6 +1233,8 @@ static int bh1770_probe(struct i2c_client *client,
> chip->prox_rate = BH1770_PROX_DEFAULT_RATE;
> chip->prox_data = 0;
>
> + printk("bh1770: regulators\n");
> +
> chip->regs[0].supply = reg_vcc;
> chip->regs[1].supply = reg_vleds;
>
> @@ -1227,14 +1242,12 @@ static int bh1770_probe(struct i2c_client *client,
> ARRAY_SIZE(chip->regs), chip->regs);
> if (err < 0) {
> dev_err(&client->dev, "Cannot get regulators\n");
> - return err;
> }
>
> err = regulator_bulk_enable(ARRAY_SIZE(chip->regs),
> chip->regs);
> if (err < 0) {
> dev_err(&client->dev, "Cannot enable regulators\n");
> - return err;
> }
>
> usleep_range(BH1770_STARTUP_DELAY, BH1770_STARTUP_DELAY * 2);
> @@ -1242,6 +1255,8 @@ static int bh1770_probe(struct i2c_client *client,
> if (err < 0)
> goto fail0;
>
> + printk("bh1770: detected\n");
> +
> /* Start chip */
> bh1770_chip_on(chip);
> pm_runtime_set_active(&client->dev);
> @@ -1269,6 +1284,8 @@ static int bh1770_probe(struct i2c_client *client,
> goto fail1;
> }
>
> + printk("bh1770: sysfs ok\n");
> +
> /*
> * Chip needs level triggered interrupt to work. However,
> * level triggering doesn't work always correctly with power
> @@ -1282,8 +1299,12 @@ static int bh1770_probe(struct i2c_client *client,
> if (err) {
> dev_err(&client->dev, "could not get IRQ %d\n",
> client->irq);
> - goto fail2;
> + //goto fail2;
> }
> +
> + printk("bh1770: irq ok, all done\n");
> + err = 0;
> +
> regulator_bulk_disable(ARRAY_SIZE(chip->regs), chip->regs);
> return err;
> fail2:
> @@ -1393,10 +1414,18 @@ static const struct dev_pm_ops bh1770_pm_ops = {
> SET_RUNTIME_PM_OPS(bh1770_runtime_suspend, bh1770_runtime_resume, NULL)
> };
>
> +#ifdef CONFIG_OF
> +static const struct of_device_id bh1770_of_match_table[] = {
> + { .compatible = "bq27200" },
> +};
> +MODULE_DEVICE_TABLE(of, bh1770_of_match_table);
> +#endif
> +
> static struct i2c_driver bh1770_driver = {
> .driver = {
> .name = "bh1770glc",
> .pm = &bh1770_pm_ops,
> + .of_match_table = of_match_ptr(bh1770_of_match_table),
> },
> .probe = bh1770_probe,
> .remove = bh1770_remove,
>
>
> --
> (english) http://www.livejournal.com/~pavelmachek
> (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Attachment:
signature.asc
Description: PGP signature
