On 2017-11-11 23:12, Ladislav Michl wrote: > Hi there, > > this patch serie updates OMAP2+ OneNAND driver to the present times, making > it fully DT configurable, using libgpio and dmaengine apis. > > Please note that unlike previous driver version, which basically ignored > DT specified timings, this one relies on it, so it is important to get > it right in your DT (dumping it from previous kernel version). > > In case synchronous timings is requested, it is okay to specify timings > for the slowest chip ever used for you board as it is evetually optimized > after chip probe. > > Original driver used DMA only if user specified r/b gpio in platform > data, now DMA is used unconditionally and PIO mode is used as fallback. > > In case anyone wants to give it a try, few DT related changes are needed: > - onenand node needs 'ti,omap2-onenand' compatible (for mailine boards this is > done in patch 2) > - to use R/B pin, rb-gpios needs to be specified (for n900 and n8x0 this is > done in patch 16, however patch lacks pinmux configuration. > > Most notable changes from previous version: > - added dmaengine patches by Peter Ujfalusi > - added dt bindings documentation > - added cleanup patches > - DMA enabled by default > > Also note that driver will fail probe OneNAND chip after patch 13 and start > working again after patch 14. Thanks for the hard work! to all: Reviewed-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx> > > Testing and benchmarking very welcome. > > Depends on "memory: omap-gpmc: Make 'bank-width' property optional" > https://patchwork.kernel.org/patch/10043259/ > > Ladislav Michl (13): > dt-bindings: mtd: gpmc-onenand: Update properties description > ARM: dts: OMAP2+: Add compatible property to onenand node > ARM: dts: omap3-igep: Update onenand node timings > mtd: onenand: omap2: Remove regulator support > mtd: onenand: omap2: Remove skip initial unlocking support > mtd: onenand: omap2: Remove partitioning support from platform data > mtd: onenand: omap2: Account waiting time as waiting on IO > mtd: onenand: omap2: Unify OMAP2 and OMAP3 DMA implementation > mtd: onenand: omap2: Do not make delay for GPIO OMAP3 specific > memory: omap-gpmc: Refactor OneNAND support > mtd: onenand: omap2: Configure driver from DT > ARM: OMAP2+: Remove gpmc-onenand > ARM: dts: Nokia: Use R/B pin > > Peter Ujfalusi (2): > mtd: onenand: omap2: Simplify the DMA setup for various paths > mtd: onenand: omap2: Convert to use dmaengine for memcpy > > .../devicetree/bindings/mtd/gpmc-onenand.txt | 6 +- > arch/arm/boot/dts/omap2420-n8x0-common.dtsi | 5 +- > arch/arm/boot/dts/omap3-igep.dtsi | 30 +- > arch/arm/boot/dts/omap3-n900.dts | 2 + > arch/arm/boot/dts/omap3-n950-n9.dtsi | 1 + > arch/arm/boot/dts/omap3430-sdp.dts | 1 + > arch/arm/mach-omap2/Makefile | 3 - > arch/arm/mach-omap2/gpmc-onenand.c | 409 --------------- > drivers/memory/omap-gpmc.c | 158 ++++-- > drivers/mtd/onenand/omap2.c | 580 ++++++++------------- > include/linux/omap-gpmc.h | 25 + > include/linux/platform_data/mtd-onenand-omap2.h | 34 -- > 12 files changed, 389 insertions(+), 865 deletions(-) > delete mode 100644 arch/arm/mach-omap2/gpmc-onenand.c > delete mode 100644 include/linux/platform_data/mtd-onenand-omap2.h > - Péter Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
