Let's make use of the generic ti-sysc module for musb to have
a child device with working runtime PM.
Cc: Bin Liu <b-liu@xxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
arch/arm/boot/dts/omap4.dtsi | 38 ++++++++++++++++++++++++++------------
1 file changed, 26 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -1135,19 +1135,33 @@
reg-names = "otghs_control";
};
- usb_otg_hs: usb_otg_hs@4a0ab000 {
- compatible = "ti,omap4-musb";
- reg = <0x4a0ab000 0x7ff>;
- interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "mc", "dma";
+ target-module@4a0ab000 {
+ compatible = "ti,sysc-type1";
ti,hwmods = "usb_otg_hs";
- usb-phy = <&usb2_phy>;
- phys = <&usb2_phy>;
- phy-names = "usb2-phy";
- multipoint = <1>;
- num-eps = <16>;
- ram-bits = <12>;
- ctrl-module = <&omap_control_usbotg>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x4a0ab000 0x4>,
+ <0x4a0ab004 0x4>,
+ <0x4a0ab008 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ranges = <0 0x4a0ab000 0x1000>;
+ clocks = <&l3_init_clkctrl OMAP4_USB_OTG_HS_CLKCTRL 0>;
+ clock-names = "clkctrl";
+
+ usb_otg_hs: otg@0 {
+ compatible = "ti,omap4-musb";
+ reg = <0x0 0x7ff>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mc", "dma";
+ usb-phy = <&usb2_phy>;
+ phys = <&usb2_phy>;
+ phy-names = "usb2-phy";
+ multipoint = <1>;
+ num-eps = <16>;
+ ram-bits = <12>;
+ ctrl-module = <&omap_control_usbotg>;
+ };
};
aes1: aes@4b501000 {
--
2.14.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
