Latest bq27xxx drivers allow to write RAM/NVRAM parameters of the fuel gauge chip from values defined in board specific device tree. This allows to specify the battery properties of a standard battery. This patch set enables this for two chips where I have tested it on real devices: bq27421: Pyra handheld prototype bq27500: OpenPandora 600 Mhz standard device Since the Pyra DT is not yet mainlined, there are only DT patches for the OpenPandora. H. Nikolaus Schaller (4): power: supply: bq27xxx: enable writing capacity values for bq27421 power: supply: bq27xxx: enable writing capacity values for bq27500 DT: OpenPandora: add battery node to describe OpenPandora battery DT: OpenPandora: fix for configuration of bq27500 fuel gauge arch/arm/boot/dts/omap3-pandora-common.dtsi | 11 ++++++++++- drivers/power/supply/bq27xxx_battery.c | 8 -------- 2 files changed, 10 insertions(+), 9 deletions(-) -- 2.12.2 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
