This has been superceded by the usage of ti_clk_ll_ops for now.
Signed-off-by: Tero Kristo <t-kristo@xxxxxx>
Acked-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
drivers/clk/ti/apll.c | 1 -
drivers/clk/ti/dpll.c | 2 --
drivers/clk/ti/gate.c | 4 +---
drivers/clk/ti/interface.c | 1 -
include/linux/clk/ti.h | 2 --
5 files changed, 1 insertion(+), 9 deletions(-)
diff --git a/drivers/clk/ti/apll.c b/drivers/clk/ti/apll.c
index 62b5db7..5cba28c 100644
--- a/drivers/clk/ti/apll.c
+++ b/drivers/clk/ti/apll.c
@@ -194,7 +194,6 @@ static void __init of_dra7_apll_setup(struct device_node *node)
clk_hw->dpll_data = ad;
clk_hw->hw.init = init;
- clk_hw->flags = MEMMAP_ADDRESSING;
init->name = node->name;
init->ops = &apll_ck_ops;
diff --git a/drivers/clk/ti/dpll.c b/drivers/clk/ti/dpll.c
index 37624e1..c149bd1 100644
--- a/drivers/clk/ti/dpll.c
+++ b/drivers/clk/ti/dpll.c
@@ -248,7 +248,6 @@ struct clk *ti_clk_register_dpll(struct ti_clk *setup)
clk_hw->dpll_data = dd;
clk_hw->ops = &clkhwops_omap3_dpll;
clk_hw->hw.init = &init;
- clk_hw->flags = MEMMAP_ADDRESSING;
init.name = setup->name;
init.ops = ops;
@@ -380,7 +379,6 @@ static void __init of_ti_dpll_setup(struct device_node *node,
clk_hw->dpll_data = dd;
clk_hw->ops = &clkhwops_omap3_dpll;
clk_hw->hw.init = init;
- clk_hw->flags = MEMMAP_ADDRESSING;
init->name = node->name;
init->ops = ops;
diff --git a/drivers/clk/ti/gate.c b/drivers/clk/ti/gate.c
index b3291db..5ff62e2 100644
--- a/drivers/clk/ti/gate.c
+++ b/drivers/clk/ti/gate.c
@@ -113,7 +113,7 @@ static struct clk *_register_gate(struct device *dev, const char *name,
clk_hw->enable_bit = bit_idx;
clk_hw->ops = hw_ops;
- clk_hw->flags = MEMMAP_ADDRESSING | clk_gate_flags;
+ clk_hw->flags = clk_gate_flags;
init.parent_names = &parent_name;
init.num_parents = 1;
@@ -203,7 +203,6 @@ struct clk_hw *ti_clk_build_component_gate(struct ti_clk_gate *setup)
ops = &clkhwops_iclk_wait;
gate->ops = ops;
- gate->flags = MEMMAP_ADDRESSING;
return &gate->hw;
}
@@ -269,7 +268,6 @@ static void __init _of_ti_gate_clk_setup(struct device_node *node,
gate->enable_bit = val;
gate->ops = hw_ops;
- gate->flags = MEMMAP_ADDRESSING;
if (!ti_clk_add_component(node, &gate->hw, CLK_COMPONENT_TYPE_GATE))
return;
diff --git a/drivers/clk/ti/interface.c b/drivers/clk/ti/interface.c
index 7927e1a..42d9fd4 100644
--- a/drivers/clk/ti/interface.c
+++ b/drivers/clk/ti/interface.c
@@ -47,7 +47,6 @@ static struct clk *_register_interface(struct device *dev, const char *name,
clk_hw->hw.init = &init;
clk_hw->ops = ops;
- clk_hw->flags = MEMMAP_ADDRESSING;
clk_hw->enable_reg = reg;
clk_hw->enable_bit = bit_idx;
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 626ae94..affdabd 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -168,7 +168,6 @@ struct clk_hw_omap {
* should be used. This is a temporary solution - a better approach
* would be to associate clock type-specific data with the clock,
* similar to the struct dpll_data approach.
- * MEMMAP_ADDRESSING: Use memmap addressing to access clock registers.
*/
#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */
#define CLOCK_IDLE_CONTROL (1 << 1)
@@ -176,7 +175,6 @@ struct clk_hw_omap {
#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */
#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */
#define CLOCK_CLKOUTX2 (1 << 5)
-#define MEMMAP_ADDRESSING (1 << 6)
/* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */
#define DPLL_LOW_POWER_STOP 0x1
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
