Às 3:32 PM de 3/8/2017, Joao Pinto escreveu: > Às 1:31 PM de 3/8/2017, Kishon Vijay Abraham I escreveu: >> Hi, >> >> On Wednesday 08 March 2017 05:07 PM, Joao Pinto wrote: >>> Às 11:35 AM de 3/8/2017, Kishon Vijay Abraham I escreveu: >>>> Hi, >>>> >>>> On Wednesday 08 March 2017 05:02 PM, Joao Pinto wrote: >>>>> >>>>> Hi Kishon, >>>>> >>>>>>> Can you provide PCIE_GET_ATU_INB_UNR_REG_OFFSET (similar to >>>>>>> PCIE_GET_ATU_OUTB_UNR_REG_OFFSET)? >>>>>> >>>>>> Yes of course, I will send you the definition soon. >>>>> >>>>> As promissed here is the definition for Inbound: >>>>> >>>>> +/* register address builder */ >>>>> +#define PCIE_GET_ATU_INB_UNR_REG_ADDR(region, register) \ >>>>> + ((0x3 << 20) | (region << 9) | \ >>>>> + (0x1 << 8) | (register << 2)) >>>> >>>> Cool, thanks! >>> >>> No problem! If you have doubts, please let me know. >> >> Okay, so this looks slightly different than the outbound macro since it takes >> the register argument. In the case of outbound PCIE_GET_ATU_OUTB_UNR_REG_OFFSET >> returns the offset which was used like >> dw_pcie_write_dbi(pci, base, offset + reg, 0x4, val); >> >> How should the value from PCIE_GET_ATU_INB_UNR_REG_ADDR be used? > > My original way was this one: > > +/* Register address builder */ > +#define PCIE_GET_ATU_OUTB_UNR_REG_ADDR(region, register) \ > + ((0x3 << 20) | (region << 9) | \ > + (register << 2)) > > Bjorn then converted to offset: > > #define PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(region) ((0x3 << 20) | (region << 9)) > > and applied the <<2 shift to the ATU registers. > > So you can use: > > #define PCIE_GET_ATU_INB_UNR_REG_ADDR(region, register) \ > ((0x3 << 20) | (region << 9) | \ > (0x1 << 8) > This one has the right name :) #define PCIE_GET_ATU_INB_UNR_REG_OFFSET(region, register) \ ((0x3 << 20) | (region << 9) | \ (0x1 << 8) > Thanks. > >> >> Thanks >> Kishon >> > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
