* Tony Lindgren <tony@xxxxxxxxxxx> [090508 12:21]:
> Add more devices for omap3430sdp
This patch should be credited for Hunyue Yau <hyau@xxxxxxxxxx>.
Tony
> Cc: Imre Deak <imre.deak@xxxxxxxxx>
> Cc: linux-fbdev-devel@xxxxxxxxxxxxxxxxxxxxx
> Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
> ---
> arch/arm/configs/omap_3430sdp_defconfig | 10 ++
> arch/arm/mach-omap2/board-2430sdp.c | 6 +
> drivers/video/omap/Kconfig | 4 +
> drivers/video/omap/Makefile | 4 +
> drivers/video/omap/lcd_2430sdp.c | 199 +++++++++++++++++++++++++++++++
> 5 files changed, 223 insertions(+), 0 deletions(-)
> create mode 100644 drivers/video/omap/lcd_2430sdp.c
>
> diff --git a/arch/arm/configs/omap_3430sdp_defconfig b/arch/arm/configs/omap_3430sdp_defconfig
> index 8fb918d..2be930c 100644
> --- a/arch/arm/configs/omap_3430sdp_defconfig
> +++ b/arch/arm/configs/omap_3430sdp_defconfig
> @@ -1331,6 +1331,16 @@ CONFIG_DISPLAY_SUPPORT=y
> #
> # CONFIG_VGA_CONSOLE is not set
> CONFIG_DUMMY_CONSOLE=y
> +CONFIG_FRAMEBUFFER_CONSOLE=y
> +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
> +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
> +# CONFIG_FONTS is not set
> +CONFIG_FONT_8x8=y
> +CONFIG_FONT_8x16=y
> +CONFIG_LOGO=y
> +CONFIG_LOGO_LINUX_MONO=y
> +CONFIG_LOGO_LINUX_VGA16=y
> +CONFIG_LOGO_LINUX_CLUT224=y
> CONFIG_SOUND=y
> CONFIG_SOUND_OSS_CORE=y
> CONFIG_SND=y
> diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
> index 2214365..017bebf 100644
> --- a/arch/arm/mach-omap2/board-2430sdp.c
> +++ b/arch/arm/mach-omap2/board-2430sdp.c
> @@ -112,6 +112,11 @@ static struct resource sdp2430_smc91x_resources[] = {
> },
> };
>
> +static struct platform_device sdp2430_lcd_device = {
> + .name = "sdp2430_lcd",
> + .id = -1,
> +};
> +
> static struct platform_device sdp2430_smc91x_device = {
> .name = "smc91x",
> .id = -1,
> @@ -122,6 +127,7 @@ static struct platform_device sdp2430_smc91x_device = {
> static struct platform_device *sdp2430_devices[] __initdata = {
> &sdp2430_smc91x_device,
> &sdp2430_flash_device,
> + &sdp2430_lcd_device,
> };
>
> static inline void __init sdp2430_init_smc91x(void)
> diff --git a/drivers/video/omap/Kconfig b/drivers/video/omap/Kconfig
> index 4440885..7ca848c 100644
> --- a/drivers/video/omap/Kconfig
> +++ b/drivers/video/omap/Kconfig
> @@ -7,6 +7,10 @@ config FB_OMAP
> help
> Frame buffer driver for OMAP based boards.
>
> +config FB_OMAP_LCD_VGA
> + bool "Use LCD in VGA mode"
> + depends on MACH_OMAP_3430SDP
> +
> config FB_OMAP_BOOTLOADER_INIT
> bool "Check bootloader initialization"
> depends on FB_OMAP
> diff --git a/drivers/video/omap/Makefile b/drivers/video/omap/Makefile
> index ed13889..e6d52f3 100644
> --- a/drivers/video/omap/Makefile
> +++ b/drivers/video/omap/Makefile
> @@ -8,6 +8,7 @@ objs-yy := omapfb_main.o
>
> objs-y$(CONFIG_ARCH_OMAP1) += lcdc.o
> objs-y$(CONFIG_ARCH_OMAP2) += dispc.o
> +objs-y$(CONFIG_ARCH_OMAP3) += dispc.o
>
> objs-$(CONFIG_ARCH_OMAP1)$(CONFIG_FB_OMAP_LCDC_EXTERNAL) += sossi.o
> objs-$(CONFIG_ARCH_OMAP2)$(CONFIG_FB_OMAP_LCDC_EXTERNAL) += rfbi.o
> @@ -24,5 +25,8 @@ objs-$(CONFIG_ARCH_OMAP16XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1610.o
> objs-$(CONFIG_ARCH_OMAP15XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1510.o
> objs-y$(CONFIG_MACH_OMAP_OSK) += lcd_osk.o
>
> +objs-y$(CONFIG_MACH_OMAP_2430SDP) += lcd_2430sdp.o
> +objs-y$(CONFIG_MACH_OMAP_3430SDP) += lcd_2430sdp.o
> +
> omapfb-objs := $(objs-yy)
>
> diff --git a/drivers/video/omap/lcd_2430sdp.c b/drivers/video/omap/lcd_2430sdp.c
> new file mode 100644
> index 0000000..a22b452
> --- /dev/null
> +++ b/drivers/video/omap/lcd_2430sdp.c
> @@ -0,0 +1,199 @@
> +/*
> + * LCD panel support for the TI 2430SDP board
> + *
> + * Copyright (C) 2007 MontaVista
> + * Author: Hunyue Yau <hyau@xxxxxxxxxx>
> + *
> + * Derived from drivers/video/omap/lcd-apollon.c
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License along
> + * with this program; if not, write to the Free Software Foundation, Inc.,
> + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/delay.h>
> +#include <linux/gpio.h>
> +#include <linux/i2c/twl4030.h>
> +
> +#include <mach/mux.h>
> +#include <mach/omapfb.h>
> +#include <asm/mach-types.h>
> +
> +#define SDP2430_LCD_PANEL_BACKLIGHT_GPIO 91
> +#define SDP2430_LCD_PANEL_ENABLE_GPIO 154
> +#define SDP3430_LCD_PANEL_BACKLIGHT_GPIO 24
> +#define SDP3430_LCD_PANEL_ENABLE_GPIO 28
> +
> +static unsigned backlight_gpio;
> +static unsigned enable_gpio;
> +
> +#define LCD_PIXCLOCK_MAX 5400 /* freq 5.4 MHz */
> +#define PM_RECEIVER TWL4030_MODULE_PM_RECEIVER
> +#define ENABLE_VAUX2_DEDICATED 0x09
> +#define ENABLE_VAUX2_DEV_GRP 0x20
> +#define ENABLE_VAUX3_DEDICATED 0x03
> +#define ENABLE_VAUX3_DEV_GRP 0x20
> +
> +#define ENABLE_VPLL2_DEDICATED 0x05
> +#define ENABLE_VPLL2_DEV_GRP 0xE0
> +#define TWL4030_VPLL2_DEV_GRP 0x33
> +#define TWL4030_VPLL2_DEDICATED 0x36
> +
> +#define t2_out(c, r, v) twl4030_i2c_write_u8(c, r, v)
> +
> +
> +static int sdp2430_panel_init(struct lcd_panel *panel,
> + struct omapfb_device *fbdev)
> +{
> + if (machine_is_omap_3430sdp()) {
> + enable_gpio = SDP3430_LCD_PANEL_ENABLE_GPIO;
> + backlight_gpio = SDP3430_LCD_PANEL_BACKLIGHT_GPIO;
> + } else {
> + enable_gpio = SDP2430_LCD_PANEL_ENABLE_GPIO;
> + backlight_gpio = SDP2430_LCD_PANEL_BACKLIGHT_GPIO;
> + }
> +
> + gpio_request(enable_gpio, "LCD enable"); /* LCD panel */
> + gpio_request(backlight_gpio, "LCD bl"); /* LCD backlight */
> + gpio_direction_output(enable_gpio, 0);
> + gpio_direction_output(backlight_gpio, 0);
> +
> + return 0;
> +}
> +
> +static void sdp2430_panel_cleanup(struct lcd_panel *panel)
> +{
> +}
> +
> +static int sdp2430_panel_enable(struct lcd_panel *panel)
> +{
> + u8 ded_val, ded_reg;
> + u8 grp_val, grp_reg;
> +
> + if (machine_is_omap_3430sdp()) {
> + ded_reg = TWL4030_VAUX3_DEDICATED;
> + ded_val = ENABLE_VAUX3_DEDICATED;
> + grp_reg = TWL4030_VAUX3_DEV_GRP;
> + grp_val = ENABLE_VAUX3_DEV_GRP;
> +
> + if (omap_rev() > OMAP3430_REV_ES1_0) {
> + t2_out(PM_RECEIVER, ENABLE_VPLL2_DEDICATED,
> + TWL4030_VPLL2_DEDICATED);
> + t2_out(PM_RECEIVER, ENABLE_VPLL2_DEV_GRP,
> + TWL4030_VPLL2_DEV_GRP);
> + }
> + } else {
> + ded_reg = TWL4030_VAUX2_DEDICATED;
> + ded_val = ENABLE_VAUX2_DEDICATED;
> + grp_reg = TWL4030_VAUX2_DEV_GRP;
> + grp_val = ENABLE_VAUX2_DEV_GRP;
> + }
> +
> + gpio_set_value(enable_gpio, 1);
> + gpio_set_value(backlight_gpio, 1);
> +
> + if (0 != t2_out(PM_RECEIVER, ded_val, ded_reg))
> + return -EIO;
> + if (0 != t2_out(PM_RECEIVER, grp_val, grp_reg))
> + return -EIO;
> +
> + return 0;
> +}
> +
> +static void sdp2430_panel_disable(struct lcd_panel *panel)
> +{
> + gpio_set_value(enable_gpio, 0);
> + gpio_set_value(backlight_gpio, 0);
> + if (omap_rev() > OMAP3430_REV_ES1_0) {
> + t2_out(PM_RECEIVER, 0x0, TWL4030_VPLL2_DEDICATED);
> + t2_out(PM_RECEIVER, 0x0, TWL4030_VPLL2_DEV_GRP);
> + mdelay(4);
> + }
> +}
> +
> +static unsigned long sdp2430_panel_get_caps(struct lcd_panel *panel)
> +{
> + return 0;
> +}
> +
> +struct lcd_panel sdp2430_panel = {
> + .name = "sdp2430",
> + .config = OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC |
> + OMAP_LCDC_INV_HSYNC,
> +
> + .bpp = 16,
> + .data_lines = 16,
> + .x_res = 240,
> + .y_res = 320,
> + .hsw = 3, /* hsync_len (4) - 1 */
> + .hfp = 3, /* right_margin (4) - 1 */
> + .hbp = 39, /* left_margin (40) - 1 */
> + .vsw = 1, /* vsync_len (2) - 1 */
> + .vfp = 2, /* lower_margin */
> + .vbp = 7, /* upper_margin (8) - 1 */
> +
> + .pixel_clock = LCD_PIXCLOCK_MAX,
> +
> + .init = sdp2430_panel_init,
> + .cleanup = sdp2430_panel_cleanup,
> + .enable = sdp2430_panel_enable,
> + .disable = sdp2430_panel_disable,
> + .get_caps = sdp2430_panel_get_caps,
> +};
> +
> +static int sdp2430_panel_probe(struct platform_device *pdev)
> +{
> + omapfb_register_panel(&sdp2430_panel);
> + return 0;
> +}
> +
> +static int sdp2430_panel_remove(struct platform_device *pdev)
> +{
> + return 0;
> +}
> +
> +static int sdp2430_panel_suspend(struct platform_device *pdev, pm_message_t mesg)
> +{
> + return 0;
> +}
> +
> +static int sdp2430_panel_resume(struct platform_device *pdev)
> +{
> + return 0;
> +}
> +
> +struct platform_driver sdp2430_panel_driver = {
> + .probe = sdp2430_panel_probe,
> + .remove = sdp2430_panel_remove,
> + .suspend = sdp2430_panel_suspend,
> + .resume = sdp2430_panel_resume,
> + .driver = {
> + .name = "sdp2430_lcd",
> + .owner = THIS_MODULE,
> + },
> +};
> +
> +static int __init sdp2430_panel_drv_init(void)
> +{
> + return platform_driver_register(&sdp2430_panel_driver);
> +}
> +
> +static void __exit sdp2430_panel_drv_exit(void)
> +{
> + platform_driver_unregister(&sdp2430_panel_driver);
> +}
> +
> +module_init(sdp2430_panel_drv_init);
> +module_exit(sdp2430_panel_drv_exit);
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
