This series update MUSB driver to add DMA support to DA8xx. It should be applied on top of "[PATCH v3 0/3] usb: musb: cppi41: Add a way to manage DMA irq" but "[PATCH v3 0/3] dmaengine: cppi41: Add dma support to da8xx" and "[PATCH] arm: davinci: Make the usb20 clock available to PM runtime" are required to make it work. Changes in v5: - Fix a typo in commit message of patch 4 Changes in v4: - Update and clarify the commit message of patch 5 - Fix the typo in patch 3 Changes in v3: - Remove PM runtime callbacks. I have update arch/arm/mach-davinci/pm_domain.c to let PM runtime control the usb20 clock. - Only use PM runtime sync operation. Changes in v2: - Clock and IRQ management has been moved to MUSB DA8xx glue (was in CPPI 4.1 driver) - I have added a partial support PM runtime. The goal was to use PM runtime to manage clock of MUSB and CPPI 4.1 (they use the same clock). - CPPI 4.1 is now achild of MUSB DA8xx glue. Alexandre Bailon (5): usb: musb: da8xx: Remove CPPI 3.0 quirk and methods usb: musb: Use shared irq usb: musb: Add support of CPPI 4.1 DMA controller to DA8xx usb: musb: musb_cppi41: Workaround DMA stall issue during teardown usb: musb: da8xx: Add a primary support of PM runtime drivers/usb/musb/Kconfig | 4 +-- drivers/usb/musb/da8xx.c | 60 +++++++++++++++++++++++++++--------------- drivers/usb/musb/musb_core.c | 2 +- drivers/usb/musb/musb_core.h | 1 + drivers/usb/musb/musb_cppi41.c | 4 +++ 5 files changed, 47 insertions(+), 24 deletions(-) -- 2.10.2 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
