* Bin Liu <b-liu@xxxxxx> [170119 09:16]: > On Thu, Jan 19, 2017 at 08:15:45AM -0800, Tony Lindgren wrote: > > * Tony Lindgren <tony@xxxxxxxxxxx> [170119 07:57]: > > > * Bin Liu <b-liu@xxxxxx> [170119 07:14]: > > > > On Thu, Jan 19, 2017 at 07:04:57AM -0800, Tony Lindgren wrote: > > > > > * Bin Liu <b-liu@xxxxxx> [170118 19:42]: > > > > > > On Wed, Jan 18, 2017 at 06:29:59PM -0800, Tony Lindgren wrote: > > > > > > > At least with the cppi41 dma, size 1 in dma transfers will just wait > > > > > > > > > > > > In which case do you see the size 1 transfer? using testusb? > > > > > > > > > > > > > until the device is disconnected. This causes timeouts in cppi41 dma > > > > > > > runtime PM. > > > > > > > > > > > > > > Also the initial size 8 transfers take about 200ms to complete when > > > > > > > plugging a USB mass storage device to a hub. But we probably want to > > > > > > > keep those to avoid using PIO. > > > > > > > > > > > > > > Fix the issue by adding a quirk for cppi41 and skip size 1 in dma if > > > > > > > set. > > > > > > > > > > > > It is fine to bypass dma for size 1 transfers, due to the dma setup > > > > > > overhead. But I'd like to know the test case to understand why it hangs. > > > > > > > > > > The test case is the same old connect a USB mass storage device to a hub. > > > > > There we see the initial size 1 transfer in the beginning. That transfer > > > > > seems to never complete with cppi41 and the transfer will stay active > > > > > until the device is disconnected. Currently we don't seem to have any > > > > > timeout mechanism in cppi41 for that. > > > > > > > > Ok, I will take a look maybe sometime next week to understand the > > > > traffic. > > > > > > > > BTY, it seems you missed my comment at the end which is about limiting > > > > the transfer size. > > > > > > Oops sorry yeah you're right, -ENOTENOUGHCOFFEEYET. > > > > Oh and testing that fix made me notice that this patch 2/2 problem is now > > gone with my current cppi41 dma fixes. So let's drop this patch 2/2, it > > seems to be just a workaround for a runtime PM autosuspend delay getting > > timed out for the dma transfer. > > > > Patch 1/2 of this series should be still applied for the -rc cycle. > > Sounds good. I wil do more check on 1/2 then send it to Greg. OK thanks. I just also posted the two cppi41 dma regression fixes, the first patch in that series makes patch 2/2 of this series obsolete. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
