The DA8xx has a CPPI 4.1 DMA controller.
This is add the glue layer required to make it work on DA8xx.
Signed-off-by: Alexandre Bailon <abailon@xxxxxxxxxxxx>
---
drivers/dma/cppi41.c | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/drivers/dma/cppi41.c b/drivers/dma/cppi41.c
index 0bc4f1a..aab1e5a 100644
--- a/drivers/dma/cppi41.c
+++ b/drivers/dma/cppi41.c
@@ -221,6 +221,20 @@ static const struct chan_queues am335x_usb_queues_rx[] = {
[29] = { .submit = 30, .complete = 155},
};
+static const struct chan_queues da8xx_usb_queues_tx[] = {
+ [0] = { .submit = 16, .complete = 24},
+ [1] = { .submit = 18, .complete = 24},
+ [2] = { .submit = 20, .complete = 24},
+ [3] = { .submit = 22, .complete = 24},
+};
+
+static const struct chan_queues da8xx_usb_queues_rx[] = {
+ [0] = { .submit = 1, .complete = 26},
+ [1] = { .submit = 3, .complete = 26},
+ [2] = { .submit = 5, .complete = 26},
+ [3] = { .submit = 7, .complete = 26},
+};
+
struct cppi_glue_infos {
irqreturn_t (*isr)(int irq, void *data);
const struct chan_queues *queues_rx;
@@ -962,8 +976,18 @@ static const struct cppi_glue_infos am335x_usb_infos = {
.qmgr_num_pend = 5,
};
+static const struct cppi_glue_infos da8xx_usb_infos = {
+ .isr = cppi41_irq,
+ .queues_rx = da8xx_usb_queues_rx,
+ .queues_tx = da8xx_usb_queues_tx,
+ .td_queue = { .submit = 31, .complete = 0 },
+ .first_completion_queue = 24,
+ .qmgr_num_pend = 2,
+};
+
static const struct of_device_id cppi41_dma_ids[] = {
{ .compatible = "ti,am3359-cppi41", .data = &am335x_usb_infos},
+ { .compatible = "ti,da8xx-cppi41", .data = &da8xx_usb_infos},
{},
};
MODULE_DEVICE_TABLE(of, cppi41_dma_ids);
--
2.10.2
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
