Hello!
On 1/13/2017 5:58 PM, Alexandre Bailon wrote:
Despite the CPPI 4.1 is a generic DMA, it is tied to USB.
On the dsps, CPPI 4.1 interrupt's registers are in USBSS (the MUSB glue).
Currently, to enable / disable and clear interrupts, the CPPI 4.1 driver
maps and accesses to USBSS's register, which making CPPI 4.1 driver not
really generic.
Move the interrupt management to dsps driver.
I believe it's a step in the right direction but not sure I understand
this patchset...
Signed-off-by: Alexandre Bailon <abailon@xxxxxxxxxxxx>
---
drivers/dma/cppi41.c | 28 +++++------------
drivers/usb/musb/musb_dsps.c | 73 ++++++++++++++++++++++++++++++++++++++++++--
2 files changed, 78 insertions(+), 23 deletions(-)
diff --git a/drivers/dma/cppi41.c b/drivers/dma/cppi41.c
index d5ba43a..4999e7d 100644
--- a/drivers/dma/cppi41.c
+++ b/drivers/dma/cppi41.c
@@ -79,14 +79,6 @@
#define QMGR_QUEUE_C(n) (0x2008 + (n) * 0x10)
#define QMGR_QUEUE_D(n) (0x200c + (n) * 0x10)
-/* Glue layer specific */
-/* USBSS / USB AM335x */
-#define USBSS_IRQ_STATUS 0x28
-#define USBSS_IRQ_ENABLER 0x2c
-#define USBSS_IRQ_CLEARR 0x30
-
-#define USBSS_IRQ_PD_COMP (1 << 2)
-
/* Packet Descriptor */
#define PD2_ZERO_LENGTH (1 << 19)
@@ -288,14 +280,8 @@ static irqreturn_t cppi41_irq(int irq, void *data)
{
struct cppi41_dd *cdd = data;
struct cppi41_channel *c;
- u32 status;
int i;
- status = cppi_readl(cdd->usbss_mem + USBSS_IRQ_STATUS);
- if (!(status & USBSS_IRQ_PD_COMP))
- return IRQ_NONE;
- cppi_writel(status, cdd->usbss_mem + USBSS_IRQ_STATUS);
-
You are removing this IRQ code completely, without a callback here?
for (i = QMGR_PENDING_SLOT_Q(FIST_COMPLETION_QUEUE); i < QMGR_NUM_PEND;
i++) {
u32 val;
[...]
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index 9f125e1..2adfe35 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
[...]
@@ -145,6 +146,13 @@ static const struct debugfs_reg32 dsps_musb_regs[] = {
{ "mode", 0xe8 },
};
+/* USBSS / USB AM335x */
+#define USBSS_IRQ_STATUS 0x28
+#define USBSS_IRQ_ENABLER 0x2c
+#define USBSS_IRQ_CLEARR 0x30
Please indent the values with tabs only, like it was done originally above...
[...]
MBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
