We can get quite a few interrupts when the battery is trickle charging.
Let's enable PM runtime autosuspend to avoid constantly toggling device
state.
Let's use a 600 ms timeout as that's how long the USB chager detection
might take.
Cc: Mark A. Greer <mgreer@xxxxxxxxxxxxxxx>
Cc: Matt Ranostay <matt@ranostay.consulting>
Cc: Liam Breck <kernel@xxxxxxxxxxxxxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
drivers/power/supply/bq24190_charger.c | 101 ++++++++++++++++++++++++++-------
1 file changed, 81 insertions(+), 20 deletions(-)
diff --git a/drivers/power/supply/bq24190_charger.c b/drivers/power/supply/bq24190_charger.c
--- a/drivers/power/supply/bq24190_charger.c
+++ b/drivers/power/supply/bq24190_charger.c
@@ -420,6 +420,7 @@ static ssize_t bq24190_sysfs_show(struct device *dev,
struct power_supply *psy = dev_get_drvdata(dev);
struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy);
struct bq24190_sysfs_field_info *info;
+ ssize_t count;
int ret;
u8 v;
@@ -427,11 +428,20 @@ static ssize_t bq24190_sysfs_show(struct device *dev,
if (!info)
return -EINVAL;
+ ret = pm_runtime_get_sync(bdi->dev);
+ if (ret < 0)
+ return ret;
+
ret = bq24190_read_mask(bdi, info->reg, info->mask, info->shift, &v);
if (ret)
- return ret;
+ count = ret;
+ else
+ count = scnprintf(buf, PAGE_SIZE, "%hhx\n", v);
+
+ pm_runtime_mark_last_busy(bdi->dev);
+ pm_runtime_put_autosuspend(bdi->dev);
- return scnprintf(buf, PAGE_SIZE, "%hhx\n", v);
+ return count;
}
static ssize_t bq24190_sysfs_store(struct device *dev,
@@ -451,9 +461,16 @@ static ssize_t bq24190_sysfs_store(struct device *dev,
if (ret < 0)
return ret;
+ ret = pm_runtime_get_sync(bdi->dev);
+ if (ret < 0)
+ return ret;
+
ret = bq24190_write_mask(bdi, info->reg, info->mask, info->shift, v);
if (ret)
- return ret;
+ count = ret;
+
+ pm_runtime_mark_last_busy(bdi->dev);
+ pm_runtime_put_autosuspend(bdi->dev);
return count;
}
@@ -795,7 +812,9 @@ static int bq24190_charger_get_property(struct power_supply *psy,
dev_dbg(bdi->dev, "prop: %d\n", psp);
- pm_runtime_get_sync(bdi->dev);
+ ret = pm_runtime_get_sync(bdi->dev);
+ if (ret < 0)
+ return ret;
switch (psp) {
case POWER_SUPPLY_PROP_CHARGE_TYPE:
@@ -835,7 +854,9 @@ static int bq24190_charger_get_property(struct power_supply *psy,
ret = -ENODATA;
}
- pm_runtime_put_sync(bdi->dev);
+ pm_runtime_mark_last_busy(bdi->dev);
+ pm_runtime_put_autosuspend(bdi->dev);
+
return ret;
}
@@ -848,7 +869,9 @@ static int bq24190_charger_set_property(struct power_supply *psy,
dev_dbg(bdi->dev, "prop: %d\n", psp);
- pm_runtime_get_sync(bdi->dev);
+ ret = pm_runtime_get_sync(bdi->dev);
+ if (ret < 0)
+ return ret;
switch (psp) {
case POWER_SUPPLY_PROP_CHARGE_TYPE:
@@ -864,7 +887,9 @@ static int bq24190_charger_set_property(struct power_supply *psy,
ret = -EINVAL;
}
- pm_runtime_put_sync(bdi->dev);
+ pm_runtime_mark_last_busy(bdi->dev);
+ pm_runtime_put_autosuspend(bdi->dev);
+
return ret;
}
@@ -1065,7 +1090,9 @@ static int bq24190_battery_get_property(struct power_supply *psy,
dev_dbg(bdi->dev, "prop: %d\n", psp);
- pm_runtime_get_sync(bdi->dev);
+ ret = pm_runtime_get_sync(bdi->dev);
+ if (ret < 0)
+ return ret;
switch (psp) {
case POWER_SUPPLY_PROP_STATUS:
@@ -1093,7 +1120,9 @@ static int bq24190_battery_get_property(struct power_supply *psy,
ret = -ENODATA;
}
- pm_runtime_put_sync(bdi->dev);
+ pm_runtime_mark_last_busy(bdi->dev);
+ pm_runtime_put_autosuspend(bdi->dev);
+
return ret;
}
@@ -1119,7 +1148,9 @@ static int bq24190_battery_set_property(struct power_supply *psy,
ret = -EINVAL;
}
- pm_runtime_put_sync(bdi->dev);
+ pm_runtime_mark_last_busy(bdi->dev);
+ pm_runtime_put_autosuspend(bdi->dev);
+
return ret;
}
@@ -1236,11 +1267,15 @@ static void bq24190_check_status(struct bq24190_dev_info *bdi)
static irqreturn_t bq24190_irq_handler_thread(int irq, void *data)
{
struct bq24190_dev_info *bdi = data;
+ int ret;
bdi->irq_event = true;
- pm_runtime_get_sync(bdi->dev);
+ ret = pm_runtime_get_sync(bdi->dev);
+ if (ret < 0)
+ return ret;
bq24190_check_status(bdi);
- pm_runtime_put_sync(bdi->dev);
+ pm_runtime_mark_last_busy(bdi->dev);
+ pm_runtime_put_autosuspend(bdi->dev);
bdi->irq_event = false;
return IRQ_HANDLED;
}
@@ -1250,7 +1285,9 @@ static int bq24190_hw_init(struct bq24190_dev_info *bdi)
u8 v;
int ret;
- pm_runtime_get_sync(bdi->dev);
+ ret = pm_runtime_get_sync(bdi->dev);
+ if (ret < 0)
+ return ret;
/* First check that the device really is what its supposed to be */
ret = bq24190_read_mask(bdi, BQ24190_REG_VPRS,
@@ -1275,7 +1312,9 @@ static int bq24190_hw_init(struct bq24190_dev_info *bdi)
ret = bq24190_read(bdi, BQ24190_REG_SS, &bdi->ss_reg);
out:
- pm_runtime_put_sync(bdi->dev);
+ pm_runtime_mark_last_busy(bdi->dev);
+ pm_runtime_put_autosuspend(bdi->dev);
+
return ret;
}
@@ -1373,9 +1412,14 @@ static int bq24190_probe(struct i2c_client *client,
dev_err(dev, "Can't set up irq handler\n");
goto out1;
}
+ enable_irq_wake(bdi->irq);
pm_runtime_enable(dev);
- pm_runtime_resume(dev);
+ pm_runtime_set_autosuspend_delay(dev, 600);
+ pm_runtime_use_autosuspend(dev);
+ ret = pm_runtime_get_sync(dev);
+ if (ret < 0)
+ goto out2;
ret = bq24190_hw_init(bdi);
if (ret < 0) {
@@ -1412,6 +1456,9 @@ static int bq24190_probe(struct i2c_client *client,
enable_irq(bdi->irq);
bdi->initialized = 1;
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
+
return 0;
out4:
@@ -1419,6 +1466,7 @@ static int bq24190_probe(struct i2c_client *client,
out3:
power_supply_unregister(bdi->charger);
out2:
+ pm_runtime_dont_use_autosuspend(dev);
pm_runtime_disable(dev);
out1:
if (bdi->gpio_int)
@@ -1430,9 +1478,14 @@ static int bq24190_probe(struct i2c_client *client,
static int bq24190_remove(struct i2c_client *client)
{
struct bq24190_dev_info *bdi = i2c_get_clientdata(client);
+ int ret;
+
+ ret = pm_runtime_get_sync(bdi->dev);
+ if (ret < 0)
+ dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", ret);
- pm_runtime_get_sync(bdi->dev);
bq24190_register_reset(bdi);
+ pm_runtime_dont_use_autosuspend(bdi->dev);
pm_runtime_put_sync(bdi->dev);
bq24190_sysfs_remove_group(bdi);
@@ -1480,10 +1533,14 @@ static int bq24190_pm_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct bq24190_dev_info *bdi = i2c_get_clientdata(client);
+ int error;
- pm_runtime_get_sync(bdi->dev);
+ error = pm_runtime_get_sync(bdi->dev);
+ if (error < 0)
+ dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", error);
bq24190_register_reset(bdi);
- pm_runtime_put_sync(bdi->dev);
+ pm_runtime_mark_last_busy(bdi->dev);
+ pm_runtime_put_autosuspend(bdi->dev);
return 0;
}
@@ -1492,15 +1549,19 @@ static int bq24190_pm_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct bq24190_dev_info *bdi = i2c_get_clientdata(client);
+ int error;
bdi->f_reg = 0;
bdi->ss_reg = BQ24190_REG_SS_VBUS_STAT_MASK;
- pm_runtime_get_sync(bdi->dev);
+ error = pm_runtime_get_sync(bdi->dev);
+ if (error < 0)
+ dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", error);
bq24190_register_reset(bdi);
bq24190_set_mode_host(bdi);
bq24190_read(bdi, BQ24190_REG_SS, &bdi->ss_reg);
- pm_runtime_put_sync(bdi->dev);
+ pm_runtime_mark_last_busy(bdi->dev);
+ pm_runtime_put_autosuspend(bdi->dev);
/* Things may have changed while suspended so alert upper layer */
power_supply_changed(bdi->charger);
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
