From: Grygorii Strashko <grygorii.strashko@xxxxxx> Date: Thu, 5 Jan 2017 14:48:07 -0600 > For proper IRQ generation by DP83867 phy the INT/PWDN pin has to be > programmed as an interrupt output instead of a Powerdown input in > Configuration Register 3 (CFG3), Address 0x001E, bit 7 INT_OE = 1. The > current driver doesn't do this and as result IRQs will not be generated by > DP83867 phy even if they are properly configured in DT. > > Hence, fix IRQ generation by properly configuring CFG3.INT_OE bit and > ensure that Link Status Change (LINK_STATUS_CHNG_INT) and Auto-Negotiation > Complete (AUTONEG_COMP_INT) interrupt are enabled. After this the DP83867 > driver will work properly in interrupt enabled mode. > > Signed-off-by: Grygorii Strashko <grygorii.strashko@xxxxxx> Applied. -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
