On Sun, Dec 18, 2016 at 12:54:40AM +0100, Pali Rohár wrote: > Based on the musb ug, force_host bit is allowed to be set along with > force_hs or force_fs bit. > > It could help to implement forced host mode via testmode on Nokia N900. > > Signed-off-by: Pali Rohár <pali.rohar@xxxxxxxxx> > --- > Changes in v2: > * Use == instead of & for comparison of testmode > --- > drivers/usb/musb/musb_debugfs.c | 44 +++++++++++++++++++++++++-------------- > 1 file changed, 28 insertions(+), 16 deletions(-) > > diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c > index 9b22d94..5308cea 100644 > --- a/drivers/usb/musb/musb_debugfs.c > +++ b/drivers/usb/musb/musb_debugfs.c > @@ -147,28 +147,34 @@ static int musb_test_mode_show(struct seq_file *s, void *unused) > > test = musb_readb(musb->mregs, MUSB_TESTMODE); > > - if (test & MUSB_TEST_FORCE_HOST) > + if (test == (MUSB_TEST_FORCE_HOST | MUSB_TEST_FORCE_FS)) > + seq_printf(s, "force host full-speed\n"); > + > + else if (test == (MUSB_TEST_FORCE_HOST | MUSB_TEST_FORCE_HS)) > + seq_printf(s, "force host high-speed\n"); > + > + else if (test == MUSB_TEST_FORCE_HOST) > seq_printf(s, "force host\n"); > > - if (test & MUSB_TEST_FIFO_ACCESS) > + else if (test == MUSB_TEST_FIFO_ACCESS) > seq_printf(s, "fifo access\n"); > > - if (test & MUSB_TEST_FORCE_FS) > + else if (test == MUSB_TEST_FORCE_FS) > seq_printf(s, "force full-speed\n"); > > - if (test & MUSB_TEST_FORCE_HS) > + else if (test == MUSB_TEST_FORCE_HS) > seq_printf(s, "force high-speed\n"); > > - if (test & MUSB_TEST_PACKET) > + else if (test == MUSB_TEST_PACKET) > seq_printf(s, "test packet\n"); > > - if (test & MUSB_TEST_K) > + else if (test == MUSB_TEST_K) > seq_printf(s, "test K\n"); > > - if (test & MUSB_TEST_J) > + else if (test == MUSB_TEST_J) > seq_printf(s, "test J\n"); > > - if (test & MUSB_TEST_SE0_NAK) > + else if (test == MUSB_TEST_SE0_NAK) > seq_printf(s, "test SE0 NAK\n"); > > return 0; > @@ -206,30 +212,36 @@ static ssize_t musb_test_mode_write(struct file *file, > if (copy_from_user(buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) > return -EFAULT; > > - if (strstarts(buf, "force host")) > + if (strstarts(buf, "force host full-speed")) buf is only 18 bytes long, the string is not fully compared. You might have to increase buf[] to 24 bytes. Regards, -Bin. -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
