GPIO de-bounce clocks don't have any impact on the module idle state, so
the clock code should not wait for the module to enable after the de-bounce
clocks are enabled.
Problem found by Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>.
Signed-off-by: Paul Walmsley <paul@xxxxxxxxx>
Signed-off-by: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
---
arch/arm/mach-omap2/clock34xx.h | 12 ++++++------
1 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 6763b8f..017a30e 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -2182,7 +2182,7 @@ static struct clk wkup_32k_fck = {
static struct clk gpio1_dbck = {
.name = "gpio1_dbck",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2_dflt,
.parent = &wkup_32k_fck,
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPIO1_SHIFT,
@@ -2427,7 +2427,7 @@ static struct clk per_32k_alwon_fck = {
static struct clk gpio6_dbck = {
.name = "gpio6_dbck",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2_dflt,
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPIO6_SHIFT,
@@ -2437,7 +2437,7 @@ static struct clk gpio6_dbck = {
static struct clk gpio5_dbck = {
.name = "gpio5_dbck",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2_dflt,
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPIO5_SHIFT,
@@ -2447,7 +2447,7 @@ static struct clk gpio5_dbck = {
static struct clk gpio4_dbck = {
.name = "gpio4_dbck",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2_dflt,
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPIO4_SHIFT,
@@ -2457,7 +2457,7 @@ static struct clk gpio4_dbck = {
static struct clk gpio3_dbck = {
.name = "gpio3_dbck",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2_dflt,
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPIO3_SHIFT,
@@ -2467,7 +2467,7 @@ static struct clk gpio3_dbck = {
static struct clk gpio2_dbck = {
.name = "gpio2_dbck",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2_dflt,
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPIO2_SHIFT,
--
1.6.3.rc1.51.gea0b7
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
