* Tony Lindgren <tony@xxxxxxxxxxx> [161201 16:29]:
> * Tony Lindgren <tony@xxxxxxxxxxx> [161201 13:45]:
> > * Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> [161201 13:37]:
> > > Hi Tony,
> > >
> > > On Thursday 01 Dec 2016 13:12:34 Tony Lindgren wrote:
> > > > * Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> [161130 09:58]:
> > > > > The Beagleboard-xM has a LAN9514 USB hub and ethernet controller,
> > > > > connected to port 2 of the OMAP EHCI controller. The board however has
> > > > > no EEPROM to store the ethernet MAC address, which is programmed by the
> > > > > boot loader.
> > > > >
> > > > > To allow Linux to use the same MAC address as the boot loader (or for
> > > > > that matter any fixed MAC address), we need a node in the device tree
> > > > > for the ethernet controller that the boot loader can update at runtime
> > > > > with a local-mac-address property. Add it, along with an alias for the
> > > > > ethernet controller to let the boot loader locate it easily.
> > > >
> > > > Does not seem to work here.. Do I need to set something in u-boot?
> > > > I'm using U-Boot 2016.09-00004-g26bb688.
> > >
> > > Some versions (possibly forked by vendors) might set the MAC address
> > > automatically in DT, but in my case I have the following in my boot script:
> > >
> > > tftp 0x80800000 beagle/omap3-beagle-xm.dtb
> > > fdt addr ${fileaddr} ${filesize}
> > > fdt resize
> > > fdt set /ocp@68000000/usbhshost@48064000/ehci@48064800/usb2@2/usbether@1 local-mac-address "[7a d2 a0 00 d1 f0]"
> >
> > OK. I just added setenv ethaddr ${usbethaddr} to my bootcmd..
>
> Here's a similar patch for omap5-uevm. Somehow u-boot does not populate the
> local-mac-address on it though although set in the environment.
>
> So I had to manually do the fdt set /ocp/usbhshost@4a064000/ehci@4a064c00/usbether@3
> command.
And here's one for pandaboard. That gets configured fine if ethaddr is
set.
Regards,
Tony
8< ------------------
>From tony Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@xxxxxxxxxxx>
Date: Thu, 1 Dec 2016 16:33:20 -0800
Subject: [PATCH] ARM: dts: pandaboard: Allow bootloader to configure USB
Ethernet MAC
Inspired by a patch for beagleboard xm by Laurent Pinchart
<laurent.pinchart@xxxxxxxxxxxxxxxx>, similar patch also works for
pandaboard. The only difference is that the hub is address 1 instead
of 2.
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
arch/arm/boot/dts/omap4-panda-common.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -16,6 +16,7 @@
aliases {
display0 = &dvi0;
display1 = &hdmi0;
+ ethernet = ðernet;
};
leds: leds {
@@ -520,6 +521,21 @@
&usbhsehci {
phys = <&hsusb1_phy>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb2@1 {
+ compatible = "usb424,9514";
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet: usbether@1 {
+ compatible = "usb424,ec00";
+ reg = <1>;
+ };
+ };
};
&dss {
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
