On 09/01/2016 08:51 AM, Tomi Valkeinen wrote:
LS_OE GPIO was changed from gpio6_28 to gpio2_30 for the Rev B1 board,
and the current .dts file has the old GPIO.
Rev B1 is the earliest board supported, so we can just change the .dts.
This fixes "omapdss error: HDMI I2C Master Error" which causes failure
to read EDID from the monitor.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
---
arch/arm/boot/dts/am57xx-beagle-x15.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index c4d04c5293b9..07603d9e2da7 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -120,7 +120,7 @@
pinctrl-0 = <&tpd12s015_pins>;
gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>, /* gpio7_10, CT CP HPD */
- <&gpio6 28 GPIO_ACTIVE_HIGH>, /* gpio6_28, LS OE */
+ <&gpio2 30 GPIO_ACTIVE_HIGH>, /* gpio2_30, LS OE */
<&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */
ports {
I believe we have A2s being shipped as well. we dont want to break A2s
either -> I propose we refactor the dts to introduce revb1 X15.
--
Regards,
Nishanth Menon
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
