On Saturday 13 August 2016 12:29 AM, Rob Herring wrote: > On Fri, Aug 12, 2016 at 10:22:28AM +0530, Vignesh R wrote: >> Add a driver to read group of GPIO lines and provide its status as a >> numerical value as input event to the system. This will help in >> intefacing devices, that can be connected over GPIOs, that provide input >> to the system by driving GPIO lines connected to them like a rotary dial >> or a switch. >> >> For example, a rotary switch can be connected to four GPIO lines. The >> status of the GPIO lines reflect the actual position of the rotary >> switch dial. For example, if dial points to 9, then the four GPIO lines >> connected to the switch will read HLLH(0b'1001 = 9). This value >> can be reported as an ABS_* event to the input subsystem. >> >> Signed-off-by: Vignesh R <vigneshr@xxxxxx> >> --- >> .../devicetree/bindings/input/gpio-decoder.txt | 23 ++++ >> drivers/input/misc/Kconfig | 12 ++ >> drivers/input/misc/Makefile | 1 + >> drivers/input/misc/gpio_decoder.c | 128 +++++++++++++++++++++ >> 4 files changed, 164 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/input/gpio-decoder.txt >> create mode 100644 drivers/input/misc/gpio_decoder.c >> >> diff --git a/Documentation/devicetree/bindings/input/gpio-decoder.txt b/Documentation/devicetree/bindings/input/gpio-decoder.txt >> new file mode 100644 >> index 000000000000..efd947f52cb3 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/input/gpio-decoder.txt >> @@ -0,0 +1,23 @@ >> +* GPIO Decoder DT bindings >> + >> +Required Properties: >> +- compatible: should be "gpio-decoder" >> +- gpios: a spec of gpios (atleast two) to be decoded to a number with >> + first entry representing the MSB. >> + >> +Optional Properties: >> +- gpio-decoder,max-value: Maximum possible value that can be reported by > > Just "decoder-max-value". Agreed. I will wait for any comments for the driver part, before sending the next version. > > With that, the binding looks fine to me: > > Acked-by: Rob Herring <robh@xxxxxxxxxx> > Thanks! -- Regards Vignesh -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
