Re: [PATCHv4 1/1] thermal: core: call thermal_zone_device_update() after mode update

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jun 29, 2016 at 02:23:22PM +0800, Zhang Rui wrote:
> Hi, Eduardo,
> 
> as the locking patch set has not been in upstream yet, you should
> either fold this fix into patch 02/15, or rebase your locking patch
> series on top of this fix.

I am folding into 02/15 and resending only the new version of that
patch. Are you OK to pick it up like that?

> 
> thanks,
> rui
> 
> On 三, 2016-06-22 at 08:03 -0700, Eduardo Valentin wrote:
> > Because several drivers do the following pattern:
> > .set_mode()
> >    ...
> >    local_data->mode = new_mode;
> >    thermal_zone_device_update(tz);
> > 
> > makes sense to simply do the thermal_zone_device_update()
> > in thermal core, after setting the new mode.
> > 
> > Also, this patch also remove deadlocks on drivers that
> > call thermal_zone_device_update() on .set_mode(),
> > as .set_mode()  is now called always with tz->lock held.
> > 
> > Cc: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
> > Cc: Len Brown <lenb@xxxxxxxxxx>
> > Cc: linux-acpi@xxxxxxxxxxxxxxx
> > Cc: "Lee, Chun-Yi" <jlee@xxxxxxxx>
> > Cc: Darren Hart <dvhart@xxxxxxxxxxxxx>
> > Cc: Zhang Rui <rui.zhang@xxxxxxxxx>
> > Cc: Keerthy <j-keerthy@xxxxxx>
> > Cc: linux-kernel@xxxxxxxxxxxxxxx
> > Cc: linux-omap@xxxxxxxxxxxxxxx
> > Cc: platform-driver-x86@xxxxxxxxxxxxxxx
> > Cc: linux-pm@xxxxxxxxxxxxxxx
> > Signed-off-by: Eduardo Valentin <edubezval@xxxxxxxxx>
> > ---
> > Hello,
> > 
> > V3->V4:
> > - ti-soc: Removed extra locking from TI SoC in set_mode
> > - ACPI: Kept the update on check as it is called on other places
> > 
> > BR,
> > 
> > Eduardo
> > 
> >  drivers/acpi/thermal.c                             | 1 -
> >  drivers/platform/x86/acerhdf.c                     | 1 -
> >  drivers/thermal/imx_thermal.c                      | 1 -
> >  drivers/thermal/of-thermal.c                       | 5 -----
> >  drivers/thermal/thermal_sysfs.c                    | 1 +
> >  drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 5 -----
> >  6 files changed, 1 insertion(+), 13 deletions(-)
> > 
> > diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
> > index 82707f9..03c3460 100644
> > --- a/drivers/acpi/thermal.c
> > +++ b/drivers/acpi/thermal.c
> > @@ -581,7 +581,6 @@ static int thermal_set_mode(struct
> > thermal_zone_device *thermal,
> >  		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
> >  			"%s kernel ACPI thermal control\n",
> >  			tz->tz_enabled ? "Enable" : "Disable"));
> > -		acpi_thermal_check(tz);
> >  	}
> >  	return 0;
> >  }
> > diff --git a/drivers/platform/x86/acerhdf.c
> > b/drivers/platform/x86/acerhdf.c
> > index 460fa67..aee33ba 100644
> > --- a/drivers/platform/x86/acerhdf.c
> > +++ b/drivers/platform/x86/acerhdf.c
> > @@ -405,7 +405,6 @@ static inline void
> > acerhdf_enable_kernelmode(void)
> >  	kernelmode = 1;
> >  
> >  	thz_dev->polling_delay = interval*1000;
> > -	thermal_zone_device_update(thz_dev);
> >  	pr_notice("kernel mode fan control ON\n");
> >  }
> >  
> > diff --git a/drivers/thermal/imx_thermal.c
> > b/drivers/thermal/imx_thermal.c
> > index c5547bd..a413eb6 100644
> > --- a/drivers/thermal/imx_thermal.c
> > +++ b/drivers/thermal/imx_thermal.c
> > @@ -246,7 +246,6 @@ static int imx_set_mode(struct
> > thermal_zone_device *tz,
> >  	}
> >  
> >  	data->mode = mode;
> > -	thermal_zone_device_update(tz);
> >  
> >  	return 0;
> >  }
> > diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-
> > thermal.c
> > index b8e509c..95c47da 100644
> > --- a/drivers/thermal/of-thermal.c
> > +++ b/drivers/thermal/of-thermal.c
> > @@ -282,17 +282,12 @@ static int of_thermal_set_mode(struct
> > thermal_zone_device *tz,
> >  {
> >  	struct __thermal_zone *data = tz->devdata;
> >  
> > -	mutex_lock(&tz->lock);
> > -
> >  	if (mode == THERMAL_DEVICE_ENABLED)
> >  		tz->polling_delay = data->polling_delay;
> >  	else
> >  		tz->polling_delay = 0;
> >  
> > -	mutex_unlock(&tz->lock);
> > -
> >  	data->mode = mode;
> > -	thermal_zone_device_update(tz);
> >  
> >  	return 0;
> >  }
> > diff --git a/drivers/thermal/thermal_sysfs.c
> > b/drivers/thermal/thermal_sysfs.c
> > index 743df50..3d0dc30 100644
> > --- a/drivers/thermal/thermal_sysfs.c
> > +++ b/drivers/thermal/thermal_sysfs.c
> > @@ -100,6 +100,7 @@ mode_store(struct device *dev, struct
> > device_attribute *attr,
> >  	mutex_lock(&tz->lock);
> >  	result = tz->ops->set_mode(tz, mode);
> >  	mutex_unlock(&tz->lock);
> > +	thermal_zone_device_update(tz);
> >  
> >  	if (result)
> >  		return result;
> > diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
> > b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
> > index 15c0a9a..5dce053 100644
> > --- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
> > +++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
> > @@ -193,19 +193,14 @@ static int ti_thermal_set_mode(struct
> > thermal_zone_device *thermal,
> >  		return 0;
> >  	}
> >  
> > -	mutex_lock(&data->ti_thermal->lock);
> > -
> >  	if (mode == THERMAL_DEVICE_ENABLED)
> >  		data->ti_thermal->polling_delay =
> > FAST_TEMP_MONITORING_RATE;
> >  	else
> >  		data->ti_thermal->polling_delay = 0;
> >  
> > -	mutex_unlock(&data->ti_thermal->lock);
> > -
> >  	data->mode = mode;
> >  	ti_bandgap_write_update_interval(bgp, data->sensor_id,
> >  					data->ti_thermal-
> > >polling_delay);
> > -	thermal_zone_device_update(data->ti_thermal);
> >  	dev_dbg(&thermal->device, "thermal polling set for
> > duration=%d msec\n",
> >  		data->ti_thermal->polling_delay);
> >  
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux