Hi,
On 5.06.2016 22:07, Pavel Machek wrote:
Add userspace API definitions.
Signed-off-by: Pavel Machek <pavel@xxxxxx>
diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h
index b6a357a..23011cc 100644
--- a/include/uapi/linux/v4l2-controls.h
+++ b/include/uapi/linux/v4l2-controls.h
@@ -974,4 +975,9 @@ enum v4l2_detect_md_mode {
#define V4L2_CID_DETECT_MD_THRESHOLD_GRID (V4L2_CID_DETECT_CLASS_BASE + 3)
#define V4L2_CID_DETECT_MD_REGION_GRID (V4L2_CID_DETECT_CLASS_BASE + 4)
+/* Control IDs specific to the AD5820 driver as defined by V4L2 */
+#define V4L2_CID_FOCUS_AD5820_BASE (V4L2_CTRL_CLASS_CAMERA | 0x10af)
+#define V4L2_CID_FOCUS_AD5820_RAMP_TIME (V4L2_CID_FOCUS_AD5820_BASE+0)
+#define V4L2_CID_FOCUS_AD5820_RAMP_MODE (V4L2_CID_FOCUS_AD5820_BASE+1)
+
#endif
Sakari, what about adding those as standard camera controls? It seems
ad5820 is not the only VCM driver to implement "antiringing" controls,
http://rohmfs.rohm.com/en/products/databook/datasheet/ic/motor/mobile_module/bu64241gwz-e.pdf
is another example I found by quick search.
What about:
#define V4L2_CID_FOCUS_STEP_MODE xxx
enum v4l2_cid_focus_step_mode {
V4L2_CID_FOCUS_STEP_MODE_DIRECT,
V4L2_CID_FOCUS_STEP_MODE_LINEAR,
V4L2_CID_FOCUS_STEP_MODE_AUTO
};
#define V4L2_CID_FOCUS_STEP_TIME xxx+1
Also, how the userspace(or the kernel) is notified by v4l that there is
an event? The point is - I think it is a good idea to notify when VCM
has completed its movement, we can start a timer based on the current
position, mode, step time etc and notify after the pre-calculated
movement time.
Here ftp://ftp.analog.com/pub/evalcd/AD5820_v1_0/AD5820_Quickstart.pdf
can be found the modes/timings description for ad5820 along with the
equations needed to calculate timings etc.
Ivo
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
