[PATCH net v3 0/5] drivers: net: cpsw: phy-handle fixes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: David Rivshin <drivshin@xxxxxxxxxxx>

This series fixes a number of related issues around using phy-handle
properties in cpsw emac nodes.

Patch 1 fixes a bug if more than one slave is used, and either
slave uses the phy-handle property in the devicetree.

Patch 2 fixes a NULL pointer dereference which can occur if a
phy-handle property is used and of_phy_connect() return NULL,
such as with a bad devicetree.

Patch 3 fixes an issue where the phy-mode property would be ignored
if a phy-handle property was used. This also fixes a bogus error
message that would be emitted.

Patch 4 fixes makes the binding documentation more explicit that
exactly one PHY property should be used, and also marks phy_id as
deprecated.

Patch 5 cleans up the fixed-link case to work like the now-fixed
phy-handle case.

I have tested on the following hardware configurations:
 - (EVMSK) dual emac, phy_id property in both slaves
 - (EVMSK) dual emac, phy-handle property in both slaves
 - (EVMSK) a bad phy-handle property pointing to &mmc1
 - (EVMSK) phy_id property with incorrect PHY address
 - (BeagleBoneBlack) single emac, phy_id property
 - (custom) single emac, fixed-link subnode

Andrew Goodbody reported testing v2 on a board that doesn't use
dual_emac mode, but with 2 PHYs using phy-handle properties [1].

Nicolas Chauvet reported testing v2 on an HP t410 (dm8148).

Markus Brunner reported testing v1 on the following [2]:
 - emac0 with phy_id and emac1 with fixed phy
 - emac0 with phy-handle and emac1 with fixed phy
 - emac0 with fixed phy and emac1 with fixed phy

[1] https://lkml.org/lkml/2016/4/22/537
[2] http://www.spinics.net/lists/netdev/msg357890.html

David Rivshin (5):
  drivers: net: cpsw: fix parsing of phy-handle DT property in dual_emac
    config
  drivers: net: cpsw: fix segfault in case of bad phy-handle
  drivers: net: cpsw: don't ignore phy-mode if phy-handle is used
  dt: cpsw: phy-handle, phy_id, and fixed-link are mutually exclusive
  drivers: net: cpsw: use of_phy_connect() in fixed-link case

 Documentation/devicetree/bindings/net/cpsw.txt |  6 +--
 drivers/net/ethernet/ti/cpsw.c                 | 69 ++++++++++++++------------
 drivers/net/ethernet/ti/cpsw.h                 |  1 +
 3 files changed, 41 insertions(+), 35 deletions(-)

-- 
2.5.5

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux