Without that, regulators are left in the mode last set by the bootloader or
by the kernel the device was rebooted from. This leads to various problems
like non-working peripherals.
Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
---
arch/arm/boot/dts/omap3-n900.dts | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index b3c26a9..1bb36e2 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -329,6 +329,7 @@
regulator-name = "V28";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <0x0e>;
regulator-always-on; /* due to battery cover sensor */
};
@@ -336,30 +337,35 @@
regulator-name = "VCSI";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <0x0e>;
};
&vaux3 {
regulator-name = "VMMC2_30";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <0x0e>;
};
&vaux4 {
regulator-name = "VCAM_ANA_28";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <0x0e>;
};
&vmmc1 {
regulator-name = "VMMC1";
regulator-min-microvolt = <1850000>;
regulator-max-microvolt = <3150000>;
+ regulator-initial-mode = <0x0e>;
};
&vmmc2 {
regulator-name = "V28_A";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <0x0e>;
regulator-always-on; /* due VIO leak to AIC34 VDDs */
};
@@ -367,6 +373,7 @@
regulator-name = "VPLL";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <0x0e>;
regulator-always-on;
};
@@ -374,6 +381,7 @@
regulator-name = "VSDI_CSI";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <0x0e>;
regulator-always-on;
};
@@ -381,6 +389,7 @@
regulator-name = "VMMC2_IO_18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <0x0e>;
};
&vio {
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
