On Mon, Apr 04, 2016 at 02:12:32PM -0500, Bin Liu wrote: > On Mon, Apr 04, 2016 at 09:02:07PM +0200, Yegor Yefremov wrote: > > On Mon, Apr 4, 2016 at 8:45 PM, Bin Liu <b-liu@xxxxxx> wrote: > > > Yegor, > > > > > > On Mon, Apr 04, 2016 at 09:03:46AM +0200, Yegor Yefremov wrote: > > >> > > > >> > I'm using Debian 8 image with following usb_modeswitch: > > >> > > > >> > root@baltos:~# usb_modeswitch -e > > >> > > > >> > * usb_modeswitch: handle USB devices with multiple modes > > >> > * Version 2.2.0 (C) Josua Dietze 2014 > > >> > * Based on libusb1/libusbx > > >> > > > >> > ! PLEASE REPORT NEW CONFIGURATIONS ! > > >> > > > >> > Both 3.18.21 and 4.5.0 report following error after MA260 insertion: > > >> > > > >> > usb 1-1.2: new high-speed USB device number 3 using musb-hdrc > > >> > usb 1-1.2: New USB device found, idVendor=2357, idProduct=f000 > > >> > usb 1-1.2: New USB device strings: Mfr=3, Product=2, SerialNumber=4 > > >> > usb 1-1.2: Product: TP-LINK HSPA+ Modem > > >> > usb 1-1.2: Manufacturer: TP-LINK, Incorporated > > >> > usb 1-1.2: SerialNumber: 863745011099716 > > >> > usb-storage 1-1.2:1.0: USB Mass Storage device detected > > >> > scsi host0: usb-storage 1-1.2:1.0 > > >> > scsi 0:0:0:0: CD-ROM TP-LINK MMC Storage 2.31 PQ: 0 ANSI: 2 > > >> > scsi 0:0:0:1: Direct-Access TP-LINK MMC Storage 2.31 PQ: 0 ANSI: 2 > > >> > sd 0:0:0:1: [sda] Attached SCSI removable disk > > >> > usb 1-1.2: USB disconnect, device number 3 > > >> > usb 1-1.2: new high-speed USB device number 4 using musb-hdrc > > >> > usb 1-1.2: New USB device found, idVendor=2357, idProduct=9000 > > >> > usb 1-1.2: New USB device strings: Mfr=3, Product=2, SerialNumber=4 > > >> > usb 1-1.2: Product: TP-LINK HSPA+ Modem > > >> > usb 1-1.2: Manufacturer: TP-LINK, Incorporated > > >> > usb 1-1.2: SerialNumber: 863745011099716 > > >> > usb-storage 1-1.2:1.2: USB Mass Storage device detected > > >> > scsi host1: usb-storage 1-1.2:1.2 > > >> > qmi_wwan 1-1.2:1.4: cdc-wdm0: USB WDM device > > >> > qmi_wwan 1-1.2:1.4 wwan0: register 'qmi_wwan' at > > >> > usb-musb-hdrc.0.auto-1.2, WWAN/QMI device, de:ea:e8:d0:61:6c > > >> > usbcore: registered new interface driver option > > >> > usbserial: USB Serial support registered for GSM modem (1-port) > > >> > option 1-1.2:1.0: GSM modem (1-port) converter detected > > >> > usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB0 > > >> > option 1-1.2:1.1: GSM modem (1-port) converter detected > > >> > usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB1 > > >> > option 1-1.2:1.3: GSM modem (1-port) converter detected > > >> > usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB2 > > >> > scsi 1:0:0:0: CD-ROM TP-LINK MMC Storage 2.31 PQ: 0 ANSI: 2 > > >> > scsi 1:0:0:1: Direct-Access TP-LINK MMC Storage 2.31 PQ: 0 ANSI: 2 > > >> > sd 1:0:0:1: [sda] Attached SCSI removable disk > > >> > ------------[ cut here ]------------ > > >> > WARNING: CPU: 0 PID: 1740 at drivers/usb/musb/musb_host.c:139 > > >> > musb_h_tx_flush_fifo+0xc4/0xe4() > > >> > musb-hdrc musb-hdrc.0.auto: Could not flush host TX2 fifo: csr: 2403 > > >> > Modules linked in: option usb_wwan musb_dsps musb_am335x > > >> > CPU: 0 PID: 1740 Comm: ModemManager Not tainted 4.5.0 #1 > > >> > Hardware name: Generic AM33XX (Flattened Device Tree) > > >> > [<c0017ecc>] (unwind_backtrace) from [<c0014100>] (show_stack+0x10/0x14) > > >> > [<c0014100>] (show_stack) from [<c03cf384>] (dump_stack+0xb0/0xe4) > > >> > [<c03cf384>] (dump_stack) from [<c003bf68>] (warn_slowpath_common+0x7c/0xb8) > > >> > [<c003bf68>] (warn_slowpath_common) from [<c003bfd4>] > > >> > (warn_slowpath_fmt+0x30/0x40) > > >> > [<c003bfd4>] (warn_slowpath_fmt) from [<c0534c30>] > > >> > (musb_h_tx_flush_fifo+0xc4/0xe4) > > >> > [<c0534c30>] (musb_h_tx_flush_fifo) from [<c0535d74>] > > >> > (musb_cleanup_urb+0xbc/0x130) > > >> > [<c0535d74>] (musb_cleanup_urb) from [<c0536424>] (musb_urb_dequeue+0xf0/0x128) > > >> > [<c0536424>] (musb_urb_dequeue) from [<c050b98c>] (usb_hcd_unlink_urb+0x50/0x84) > > >> > [<c050b98c>] (usb_hcd_unlink_urb) from [<c050cbd0>] (usb_kill_urb+0x4c/0xc4) > > >> > [<c050cbd0>] (usb_kill_urb) from [<bf00e85c>] > > >> > (usb_wwan_close+0xbc/0xf0 [usb_wwan]) > > >> > [<bf00e85c>] (usb_wwan_close [usb_wwan]) from [<c042d8e0>] > > >> > (tty_port_shutdown+0x90/0x9c) > > >> > [<c042d8e0>] (tty_port_shutdown) from [<c042dfd0>] (tty_port_close+0x24/0x4c) > > >> > [<c042dfd0>] (tty_port_close) from [<c0425f30>] (tty_release+0xec/0x474) > > >> > [<c0425f30>] (tty_release) from [<c0168b60>] (__fput+0x80/0x1d0) > > >> > [<c0168b60>] (__fput) from [<c005b944>] (task_work_run+0x90/0xc4) > > >> > [<c005b944>] (task_work_run) from [<c0013ac4>] (do_work_pending+0x8c/0xb4) > > >> > [<c0013ac4>] (do_work_pending) from [<c000f8e8>] (slow_work_pending+0xc/0x20) > > >> > ---[ end trace cbf0ee35fffa18d3 ]--- > > >> > > > >> > Debian image was created with these scripts: > > >> > https://github.com/visionsystemsgmbh/vsdebootstrap > > >> > Kernel config: https://github.com/visionsystemsgmbh/onrisc_br_bsp/blob/master/board/vscom/baltos/linux-3.15-config > > >> > > > >> > I've tried both usb1 channel and USB hub and usb2 channel directly. In > > >> > both cases I get this crash. > > >> > > >> I've made some more test and could at least find a software > > >> constellation, that produces this error. You'll need ModemManager and > > >> libqmi. As soon as ModemManager sees the modem it opens and closes its > > > > > > Are you sure it is ModemManager open/close the port? Or other app? > > > > Good question. At first I had a rootfs without ModemManager and libqmi > > and I had no tx errors, but as soon as I added ModemManager I got this > > issue. Will look more into it tomorrow. > > > > > In my debian rootfs, I did > > > > > > # apt-get install modemmanager libqmi-utils > > > > > > but it seems there is not open/close to the modem uart port. tx fifo > > > flush problem still does not happen to me. here is the enum log. > > > > > > 1 [ 663.745927] usb 2-1: new high-speed USB device number 14 using musb-hdrc > > > 2 [ 663.890525] usb 2-1: New USB device found, idVendor=2357, idProduct=f000 > > > 3 [ 663.897857] usb 2-1: New USB device strings: Mfr=3, Product=2, SerialNumber=4 > > > 4 [ 663.905462] usb 2-1: Product: TP-LINK HSPA+ Modem > > > 5 [ 663.910666] usb 2-1: Manufacturer: TP-LINK, Incorporated > > > 6 [ 663.916451] usb 2-1: SerialNumber: 863745011324437 > > > 7 [ 663.961261] usb-storage 2-1:1.0: USB Mass Storage device detected > > > 8 [ 663.996977] scsi host12: usb-storage 2-1:1.0 > > > 9 [ 664.999261] scsi 12:0:0:0: CD-ROM TP-LINK MMC Storage 2.31 PQ: 0 ANSI: 2 > > > 10 [ 665.010298] scsi 12:0:0:1: Direct-Access TP-LINK MMC Storage 2.31 PQ: 0 ANSI: 2 > > > 11 [ 665.059673] sd 12:0:0:1: [sda] Attached SCSI removable disk > > > 12 [ 665.699173] usb 2-1: USB disconnect, device number 14 > > > 13 [ 666.195929] usb 2-1: new high-speed USB device number 15 using musb-hdrc > > > 14 [ 666.340925] usb 2-1: New USB device found, idVendor=2357, idProduct=9000 > > > 15 [ 666.348258] usb 2-1: New USB device strings: Mfr=3, Product=2, SerialNumber=4 > > > 16 [ 666.356057] usb 2-1: Product: TP-LINK HSPA+ Modem > > > 17 [ 666.361086] usb 2-1: Manufacturer: TP-LINK, Incorporated > > > 18 [ 666.366857] usb 2-1: SerialNumber: 863745011324437 > > > 19 [ 666.422189] option 2-1:1.0: GSM modem (1-port) converter detected > > > 20 [ 666.448184] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0 > > > 21 [ 666.461670] option 2-1:1.1: GSM modem (1-port) converter detected > > > 22 [ 666.488928] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1 > > > 23 [ 666.501318] usb-storage 2-1:1.2: USB Mass Storage device detected > > > 24 [ 666.528750] scsi host13: usb-storage 2-1:1.2 > > > 25 [ 666.543441] option 2-1:1.3: GSM modem (1-port) converter detected > > > 26 [ 666.573614] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2 > > > 27 [ 666.613559] qmi_wwan 2-1:1.4: cdc-wdm0: USB WDM device > > > 28 [ 666.627262] qmi_wwan 2-1:1.4 wwan0: register 'qmi_wwan' at usb-musb-hdrc.1.auto-1, WWAN/QMI device, 22:2f:9a:72:2e:40 > > > 29 [ 667.542287] scsi 13:0:0:0: CD-ROM TP-LINK MMC Storage 2.31 PQ: 0 ANSI: 2 > > > 30 [ 667.588101] scsi 13:0:0:1: Direct-Access TP-LINK MMC Storage 2.31 PQ: 0 ANSI: 2 > > > 31 [ 667.653600] sd 13:0:0:1: [sda] Attached SCSI removable disk > > > > Could you post output from: > > > > mmcli -m 0 > > root@debian:~# mmcli -m 0 > error: couldn't get bus: Could not connect: No such file or directory > > root@debian:~# mmcli -L > error: couldn't get bus: Could not connect: No such file or directory > > Seems like I miss something in my rootfs? > Ok, missing 'dbus' package. I am able to see the issue now. Does your modem still functional after the fifo flush issue? I am not familiar with modem. Regards, -Bin. -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
