Hi! > > On Tue, Mar 29, 2016 at 12:51:28PM +0200, Pavel Machek wrote: > > > For 1-3 in the series, Acked-by: Pavel Machek <pavel@xxxxxx> > > > > > > > Like the Nokia N900, the N950 has leds to show > > > > the state of sys_clkreq and sys_off_mode pins. > > > > > > > > A detailed description for the LEDs and > > > > OMAP's sleep states can be found in Tony's > > > > commit for the Nokia N900: > > > > > > > > c1be2032f66df9e1238bd5bc4ca666de88a62abc > > > > > > I must say I've seen it on N900, and yes, it is useful, but no, I > > > don't think this is right. > > > > > > This is not a LED. This is a interface that changes meaning of two > > > other LEDs. I guess it should go to debugfs somewhere. > > Eh that sounds like a GPIO LED to me :) And it already has a > /sys/class/leds/debug interface. > > The two LEDs this GPIO controls are hardwired to sys_clkreq and > sys_off_mode pins that are the control signals between the SoC > and PMIC. No, not on N900. On N900, these LEDs are normally used for keyboard backlight. > In theory you could steal the sys_clkreq and sys_off_mode pins > from the PMIC at the cost of breaking PM. But I doubt anybody > wants to do that considering it's a battery operated device. No. It seems that on N900, you can select whether sys_clkreq and sys_off_mode is binary-or'ed with normal control of two keyboard backlight LEDs. > > I don't think we should diverge N900 and N950 userspace > > APIs in this regard. > > > > Actually the correct way would be a custom trigger > > for the leds IMHO. I don't know if the led framework > > supports per led custom triggers, though. > > Sure, there are something like 10 triggers already. And > you can already change them using: > > echo none > /sys/class/leds/debug::sleep/trigger > > That still does not change the fact that the LEDs trigger > based on the state of sys_clkreq and sys_off_mode. > > Maybe I'm not following what you guys are trying to achieve > here though :) If so, please let me know. ...and this is what this GPIO does. So it is not exactly a LED. You can turn it on, but than, _two_ LEDs will start blinking. You can't control them with the brightess control. "Heartbeat" trigger is going to be very confusing on debug::sleep. Best regards, Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
