On 04/01/2016 10:58 AM, Felipe Balbi wrote:
>
> Hi,
>
> Grygorii Strashko <grygorii.strashko@xxxxxx> writes:
>> On 03/31/2016 11:04 AM, Felipe Balbi wrote:
>>> "Thang Q. Nguyen" <tqnguyen@xxxxxxx> writes:
>>>> [ text/plain ]
>>>> Thanks Grygorii for information.
>>>> I checked but do not see dma_init_dev_from_parent is used in
>>>> linux-next repository. Can you give me more information for what
>>>> branch I can checkout to use it for USB DWC3?
>>>
>>> dma_init_dev_from_parent() is still a proposal ;-)
>>>
>>
>> Felipe,
>>
>> After some experiments I came up with below fix (not common, but fixes USB
>> case on keystone 2). if you agree with proposed fix I'll send proper
>> patches to fix usb_add_gadget_udc_release() and dwc3_host_init() in the same
>> way.
>>
>> diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
>> index c679f63..3fe1c65 100644
>> --- a/drivers/usb/dwc3/host.c
>> +++ b/drivers/usb/dwc3/host.c
>> @@ -17,6 +17,7 @@
>>
>> #include <linux/platform_device.h>
>> #include <linux/usb/xhci_pdriver.h>
>> +#include <linux/of_device.h>
>>
>> #include "core.h"
>>
>> @@ -35,8 +36,6 @@ int dwc3_host_init(struct dwc3 *dwc)
>> dma_set_coherent_mask(&xhci->dev, dwc->dev->coherent_dma_mask);
>>
>> xhci->dev.parent = dwc->dev;
>> - xhci->dev.dma_mask = dwc->dev->dma_mask;
>> - xhci->dev.dma_parms = dwc->dev->dma_parms;
>>
>> dwc->xhci = xhci;
>>
>> @@ -62,6 +61,12 @@ int dwc3_host_init(struct dwc3 *dwc)
>> phy_create_lookup(dwc->usb3_generic_phy, "usb3-phy",
>> dev_name(&xhci->dev));
>>
>> + if (!dwc->dev->of_node) {
>> + xhci->dev.dma_mask = dwc->dev->dma_mask;
>> + xhci->dev.dma_parms = dwc->dev->dma_parms;
>> + } else
>> + of_dma_configure(&xhci->dev, dwc->dev->of_node);
>
> if of_dma_configure() does what you want, why don't you just stick it in
> dwc3-keystone.c and let the driver continue to copy things for now ?
> Something like below, perhaps ?
>
I know (and i have patch to fix that which I'm going to send) that DMA config
in dwc3-keystone.c is not correct and we are good till now just
because dwc3_keystone is not used for DMA operations directly.
Now about xhci and friends:
dwc3_keystone *is created* from DT : of_platform_device_create() -> of_platform_device_create_pdata() -> of_dma_configure()
|- dwc3 *is created* from DT : of_platform_device_create() -> of_platform_device_create_pdata() -> of_dma_configure()
|- [1] *creates* xhci dev manually : DMA configuration copied manually in dwc3_host_init()
|- [2] *creates* usb_gadget dev manually: DMA configuration copied manually in usb_add_gadget_udc_release()
|- *creates* usb_udc dev manually : not used for DMA operations directly (as I've checked)
Now cases [1] & [2] introduces failures, because DMA configuration is not complete for
these devices.
I can confirm that if I fix [1] & [2] as above USB Device/Dual modes will start
working on K2E.
--
regards,
-grygorii
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
