Hi,
"Thang Q. Nguyen" <tqnguyen@xxxxxxx> writes:
> From: "Thang Q. Nguyen" <tqnguyen@xxxxxxx>
>
> Add 64-bit DMA operation support to the USB DWC3 driver.
> First attempt to set the coherent DMA mask for 64-bit DMA.
> If that failed, attempt again with 32-bit DMA.
>
> Changes from v2:
> - None.
>
> Changes from v1:
> - Remove WARN_ON if dma_mask is NULL
these changes lines should be between the tearline (---) and diffstat
below.
> Signed-off-by: Thang Q. Nguyen <tqnguyen@xxxxxxx>
> ---
> drivers/usb/dwc3/core.c | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index de5e01f..2479c24 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -831,6 +831,21 @@ static int dwc3_probe(struct platform_device *pdev)
> dwc->mem = mem;
> dwc->dev = dev;
>
> + /* Try to set 64-bit DMA first */
> + if (!pdev->dev.dma_mask)
> + /* Platform did not initialize dma_mask */
> + ret = dma_coerce_mask_and_coherent(&pdev->dev,
> + DMA_BIT_MASK(64));
> + else
> + ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
> +
> + /* If seting 64-bit DMA mask fails, fall back to 32-bit DMA mask */
> + if (ret) {
> + ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
> + if (ret)
> + return ret;
> + }
Also, why is it so that you need this now ? glue layers are copying dma
mask from parent device and that should be set properly. This really
shouldn't be necessary in dwc3-core; it would mean that glue layer
didn't set this device up properly.
--
balbi
Attachment:
signature.asc
Description: PGP signature
