[PATCH 7/8] input: misc: Add TWL6030 power button support to twl-pwrbutton

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This renames the twl4030-pwrbutton driver to twl-pwrbutton, since power button
handling is very similar on most TWL chips. This also introduces TWL6030 power
button support.

TWL6030 power button support requires the following additional changes:
* Devicetree binding and support
* Interrupt unmasking and remasking support

Signed-off-by: Paul Kocialkowski <contact@xxxxxxxx>
---
 .../devicetree/bindings/input/twl-pwrbutton.txt    |  22 ++++
 .../bindings/input/twl4030-pwrbutton.txt           |  21 ---
 arch/arm/boot/dts/twl6030.dtsi                     |   5 +
 arch/arm/configs/omap2plus_defconfig               |   2 +-
 drivers/input/misc/Kconfig                         |   8 +-
 drivers/input/misc/Makefile                        |   2 +-
 drivers/input/misc/twl-pwrbutton.c                 | 143 +++++++++++++++++++++
 drivers/input/misc/twl4030-pwrbutton.c             | 116 -----------------
 drivers/mfd/twl-core.c                             |  12 +-
 include/linux/i2c/twl.h                            |   1 +
 10 files changed, 187 insertions(+), 145 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/input/twl-pwrbutton.txt
 delete mode 100644 Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt
 create mode 100644 drivers/input/misc/twl-pwrbutton.c
 delete mode 100644 drivers/input/misc/twl4030-pwrbutton.c

diff --git a/Documentation/devicetree/bindings/input/twl-pwrbutton.txt b/Documentation/devicetree/bindings/input/twl-pwrbutton.txt
new file mode 100644
index 0000000..4931be4
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/twl-pwrbutton.txt
@@ -0,0 +1,22 @@
+Texas Instruments TWL family pwrbutton module
+
+This module is part of a TWL chip. For more details about the whole
+chip see Documentation/devicetree/bindings/mfd/twl-familly.txt.
+
+This module provides a simple power button event via an Interrupt.
+
+Required properties:
+- compatible: should be one of the following
+   - "ti,twl4030-pwrbutton": For controllers compatible with twl4030
+   - "ti,twl6030-pwrbutton": For controllers compatible with twl6030
+- interrupts: should be one of the following
+   - <8>: For controllers compatible with the twl
+
+Example:
+
+&twl {
+	twl_pwrbutton: pwrbutton {
+		compatible = "ti,twl4030-pwrbutton";
+		interrupts = <8>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt b/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt
deleted file mode 100644
index c864a46..0000000
--- a/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Texas Instruments TWL family (twl4030) pwrbutton module
-
-This module is part of the TWL4030. For more details about the whole
-chip see Documentation/devicetree/bindings/mfd/twl-familly.txt.
-
-This module provides a simple power button event via an Interrupt.
-
-Required properties:
-- compatible: should be one of the following
-   - "ti,twl4030-pwrbutton": For controllers compatible with twl4030
-- interrupts: should be one of the following
-   - <8>: For controllers compatible with twl4030
-
-Example:
-
-&twl {
-	twl_pwrbutton: pwrbutton {
-		compatible = "ti,twl4030-pwrbutton";
-		interrupts = <8>;
-	};
-};
diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi
index 55eb35f..6a52df1 100644
--- a/arch/arm/boot/dts/twl6030.dtsi
+++ b/arch/arm/boot/dts/twl6030.dtsi
@@ -99,4 +99,9 @@
 		compatible = "ti,twl6030-pwmled";
 		#pwm-cells = <2>;
 	};
+
+	twl_pwrbutton: pwrbutton {
+		compatible = "ti,twl6030-pwrbutton";
+		interrupts = <0>;
+	};
 };
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 156bc88..ff9752a 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -217,7 +217,7 @@ CONFIG_TOUCHSCREEN_TSC2007=m
 CONFIG_TOUCHSCREEN_TI_AM335X_TSC=m
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_TPS65218_PWRBUTTON=m
-CONFIG_INPUT_TWL4030_PWRBUTTON=m
+CONFIG_INPUT_TWL_PWRBUTTON=m
 CONFIG_INPUT_PALMAS_PWRBUTTON=m
 CONFIG_SERIO=m
 # CONFIG_LEGACY_PTYS is not set
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 6abb6df..f643e14 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -459,15 +459,15 @@ config INPUT_AXP20X_PEK
 	  be called axp20x-pek.
 
 
-config INPUT_TWL4030_PWRBUTTON
-	tristate "TWL4030 Power button Driver"
+config INPUT_TWL_PWRBUTTON
+	tristate "TWL Power button Driver"
 	depends on TWL_CORE
 	help
 	  Say Y here if you want to enable power key reporting via the
-	  TWL4030 family of chips.
+	  TWL family of chips.
 
 	  To compile this driver as a module, choose M here. The module will
-	  be called twl4030_pwrbutton.
+	  be called twl_pwrbutton.
 
 config INPUT_TWL4030_VIBRA
 	tristate "Support for TWL4030 Vibrator"
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 0357a08..f77f5e7 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -66,7 +66,7 @@ obj-$(CONFIG_INPUT_SIRFSOC_ONKEY)	+= sirfsoc-onkey.o
 obj-$(CONFIG_INPUT_SOC_BUTTON_ARRAY)	+= soc_button_array.o
 obj-$(CONFIG_INPUT_SPARCSPKR)		+= sparcspkr.o
 obj-$(CONFIG_INPUT_TPS65218_PWRBUTTON)	+= tps65218-pwrbutton.o
-obj-$(CONFIG_INPUT_TWL4030_PWRBUTTON)	+= twl4030-pwrbutton.o
+obj-$(CONFIG_INPUT_TWL_PWRBUTTON)	+= twl-pwrbutton.o
 obj-$(CONFIG_INPUT_TWL4030_VIBRA)	+= twl4030-vibra.o
 obj-$(CONFIG_INPUT_TWL6040_VIBRA)	+= twl6040-vibra.o
 obj-$(CONFIG_INPUT_UINPUT)		+= uinput.o
diff --git a/drivers/input/misc/twl-pwrbutton.c b/drivers/input/misc/twl-pwrbutton.c
new file mode 100644
index 0000000..a7bc8ad
--- /dev/null
+++ b/drivers/input/misc/twl-pwrbutton.c
@@ -0,0 +1,143 @@
+/**
+ * twl4030-pwrbutton.c - TWL4030 Power Button Input Driver
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Peter De Schrijver <peter.de-schrijver@xxxxxxxxx>
+ * Several fixes by Felipe Balbi <felipe.balbi@xxxxxxxxx>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/i2c/twl.h>
+
+#define PWR_PWRON_IRQ (1 << 0)
+
+#define TWL4030_STS_HW_CONDITIONS 0x0f
+#define TWL6030_STS_HW_CONDITIONS 0x21
+
+static irqreturn_t powerbutton_irq(int irq, void *_pwr)
+{
+	struct input_dev *pwr = _pwr;
+	int err;
+	u8 value;
+
+	if (twl_class_is_4030())
+		err = twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &value,
+				TWL4030_STS_HW_CONDITIONS);
+	else
+		err = twl_i2c_read_u8(TWL6030_MODULE_ID0, &value,
+				TWL6030_STS_HW_CONDITIONS);
+
+	if (!err)  {
+		pm_wakeup_event(pwr->dev.parent, 0);
+		input_report_key(pwr, KEY_POWER, value & PWR_PWRON_IRQ);
+		input_sync(pwr);
+	} else {
+		dev_err(pwr->dev.parent, "twl4030: i2c error %d while reading"
+			" TWL4030 PM_MASTER STS_HW_CONDITIONS register\n", err);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int twl_pwrbutton_probe(struct platform_device *pdev)
+{
+	struct input_dev *pwr;
+	int irq = platform_get_irq(pdev, 0);
+	int err;
+
+	pwr = devm_input_allocate_device(&pdev->dev);
+	if (!pwr) {
+		dev_err(&pdev->dev, "Can't allocate power button\n");
+		return -ENOMEM;
+	}
+
+	pwr->evbit[0] = BIT_MASK(EV_KEY);
+	pwr->keybit[BIT_WORD(KEY_POWER)] = BIT_MASK(KEY_POWER);
+	pwr->name = "twl_pwrbutton";
+	pwr->phys = "twl_pwrbutton/input0";
+	pwr->dev.parent = &pdev->dev;
+
+	if (twl_class_is_6030()) {
+		twl6030_interrupt_unmask(TWL6030_PWRON_INT_MASK,
+			REG_INT_MSK_LINE_A);
+		twl6030_interrupt_unmask(TWL6030_PWRON_INT_MASK,
+			REG_INT_MSK_STS_A);
+	}
+
+	err = devm_request_threaded_irq(&pwr->dev, irq, NULL, powerbutton_irq,
+			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING |
+			IRQF_ONESHOT,
+			"twl_pwrbutton", pwr);
+	if (err < 0) {
+		dev_err(&pdev->dev, "Can't get IRQ for pwrbutton: %d\n", err);
+		return err;
+	}
+
+	err = input_register_device(pwr);
+	if (err) {
+		dev_err(&pdev->dev, "Can't register power button: %d\n", err);
+		return err;
+	}
+
+	platform_set_drvdata(pdev, pwr);
+	device_init_wakeup(&pdev->dev, true);
+
+	return 0;
+}
+
+static int twl_pwrbutton_remove(struct platform_device *pdev)
+{
+	if (twl_class_is_6030()) {
+		twl6030_interrupt_mask(TWL6030_PWRON_INT_MASK,
+			REG_INT_MSK_LINE_A);
+		twl6030_interrupt_mask(TWL6030_PWRON_INT_MASK,
+			REG_INT_MSK_STS_A);
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id twl_pwrbutton_dt_match_table[] = {
+       { .compatible = "ti,twl4030-pwrbutton" },
+       { .compatible = "ti,twl6030-pwrbutton" },
+       {},
+};
+MODULE_DEVICE_TABLE(of, twl_pwrbutton_dt_match_table);
+#endif
+
+static struct platform_driver twl_pwrbutton_driver = {
+	.probe		= twl_pwrbutton_probe,
+	.remove		= twl_pwrbutton_remove,
+	.driver		= {
+		.name	= "twl_pwrbutton",
+		.of_match_table = of_match_ptr(twl_pwrbutton_dt_match_table),
+	},
+};
+module_platform_driver(twl_pwrbutton_driver);
+
+MODULE_ALIAS("platform:twl_pwrbutton");
+MODULE_DESCRIPTION("TWL Power Button");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Peter De Schrijver <peter.de-schrijver@xxxxxxxxx>");
+MODULE_AUTHOR("Felipe Balbi <felipe.balbi@xxxxxxxxx>");
diff --git a/drivers/input/misc/twl4030-pwrbutton.c b/drivers/input/misc/twl4030-pwrbutton.c
deleted file mode 100644
index 603fc2f..0000000
--- a/drivers/input/misc/twl4030-pwrbutton.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/**
- * twl4030-pwrbutton.c - TWL4030 Power Button Input Driver
- *
- * Copyright (C) 2008-2009 Nokia Corporation
- *
- * Written by Peter De Schrijver <peter.de-schrijver@xxxxxxxxx>
- * Several fixes by Felipe Balbi <felipe.balbi@xxxxxxxxx>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file "COPYING" in the main directory of this
- * archive for more details.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/input.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/i2c/twl.h>
-
-#define PWR_PWRON_IRQ (1 << 0)
-
-#define STS_HW_CONDITIONS 0xf
-
-static irqreturn_t powerbutton_irq(int irq, void *_pwr)
-{
-	struct input_dev *pwr = _pwr;
-	int err;
-	u8 value;
-
-	err = twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &value, STS_HW_CONDITIONS);
-	if (!err)  {
-		pm_wakeup_event(pwr->dev.parent, 0);
-		input_report_key(pwr, KEY_POWER, value & PWR_PWRON_IRQ);
-		input_sync(pwr);
-	} else {
-		dev_err(pwr->dev.parent, "twl4030: i2c error %d while reading"
-			" TWL4030 PM_MASTER STS_HW_CONDITIONS register\n", err);
-	}
-
-	return IRQ_HANDLED;
-}
-
-static int twl4030_pwrbutton_probe(struct platform_device *pdev)
-{
-	struct input_dev *pwr;
-	int irq = platform_get_irq(pdev, 0);
-	int err;
-
-	pwr = devm_input_allocate_device(&pdev->dev);
-	if (!pwr) {
-		dev_err(&pdev->dev, "Can't allocate power button\n");
-		return -ENOMEM;
-	}
-
-	pwr->evbit[0] = BIT_MASK(EV_KEY);
-	pwr->keybit[BIT_WORD(KEY_POWER)] = BIT_MASK(KEY_POWER);
-	pwr->name = "twl4030_pwrbutton";
-	pwr->phys = "twl4030_pwrbutton/input0";
-	pwr->dev.parent = &pdev->dev;
-
-	err = devm_request_threaded_irq(&pwr->dev, irq, NULL, powerbutton_irq,
-			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING |
-			IRQF_ONESHOT,
-			"twl4030_pwrbutton", pwr);
-	if (err < 0) {
-		dev_err(&pdev->dev, "Can't get IRQ for pwrbutton: %d\n", err);
-		return err;
-	}
-
-	err = input_register_device(pwr);
-	if (err) {
-		dev_err(&pdev->dev, "Can't register power button: %d\n", err);
-		return err;
-	}
-
-	platform_set_drvdata(pdev, pwr);
-	device_init_wakeup(&pdev->dev, true);
-
-	return 0;
-}
-
-#ifdef CONFIG_OF
-static const struct of_device_id twl4030_pwrbutton_dt_match_table[] = {
-       { .compatible = "ti,twl4030-pwrbutton" },
-       {},
-};
-MODULE_DEVICE_TABLE(of, twl4030_pwrbutton_dt_match_table);
-#endif
-
-static struct platform_driver twl4030_pwrbutton_driver = {
-	.probe		= twl4030_pwrbutton_probe,
-	.driver		= {
-		.name	= "twl4030_pwrbutton",
-		.of_match_table = of_match_ptr(twl4030_pwrbutton_dt_match_table),
-	},
-};
-module_platform_driver(twl4030_pwrbutton_driver);
-
-MODULE_ALIAS("platform:twl4030_pwrbutton");
-MODULE_DESCRIPTION("Triton2 Power Button");
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Peter De Schrijver <peter.de-schrijver@xxxxxxxxx>");
-MODULE_AUTHOR("Felipe Balbi <felipe.balbi@xxxxxxxxx>");
-
diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
index 74372bc..a1bfe23 100644
--- a/drivers/mfd/twl-core.c
+++ b/drivers/mfd/twl-core.c
@@ -848,13 +848,21 @@ add_children(struct twl_platform_data *pdata, unsigned irq_base,
 			return PTR_ERR(child);
 	}
 
-	if (IS_ENABLED(CONFIG_INPUT_TWL4030_PWRBUTTON) && twl_class_is_4030()) {
-		child = add_child(TWL_MODULE_PM_MASTER, "twl4030_pwrbutton",
+	if (IS_ENABLED(CONFIG_INPUT_TWL_PWRBUTTON) && twl_class_is_4030()) {
+		child = add_child(TWL_MODULE_PM_MASTER, "twl_pwrbutton",
 				  NULL, 0, true, irq_base + 8 + 0, 0);
 		if (IS_ERR(child))
 			return PTR_ERR(child);
 	}
 
+	if (IS_ENABLED(CONFIG_INPUT_TWL_PWRBUTTON) && twl_class_is_6030()) {
+		child = add_child(TWL_MODULE_PM_MASTER, "twl_pwrbutton",
+				  NULL, 0, true, irq_base + 0, 0);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
+	}
+
+
 	if (IS_ENABLED(CONFIG_MFD_TWL4030_AUDIO) && pdata->audio &&
 	    twl_class_is_4030()) {
 		child = add_child(TWL4030_MODULE_AUDIO_VOICE, "twl4030-audio",
diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h
index 2decb190..20d33b7 100644
--- a/include/linux/i2c/twl.h
+++ b/include/linux/i2c/twl.h
@@ -127,6 +127,7 @@ enum twl6030_module_ids {
 #define REG_INT_MSK_STS_C		0x08
 
 /* MASK INT REG GROUP A */
+#define TWL6030_PWRON_INT_MASK		0x01
 #define TWL6030_PWR_INT_MASK 		0x07
 #define TWL6030_RTC_INT_MASK 		0x18
 #define TWL6030_HOTDIE_INT_MASK 	0x20
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux