OK, so at last I finished charging of my N900; found 1.8V USB to UART adapter and soldered it to the phone. I managed to boot N900 with working USB gadget (builtin g_ether) in boardfile mode, can ping it from PC and transfer data. I don't see any issue (except of musb name issue in twl phy driver, I've already sent a fix for that: https://lkml.org/lkml/2016/3/24/670 ) Pavel, I still don't see how you've got your issue, please share more detials Regards, Ruslan On Thu, Mar 24, 2016 at 2:45 AM, Ruslan Bilovol <ruslan.bilovol@xxxxxxxxx> wrote: > Hi Pavel, > > I didn't use my N900 for years, it is deeply discharged and can't > boot, so I left it connected overnight to the wall adapter to let it > get some juice. > > Meanwhile I looked into sources and still can't understand how > it happens. > Could you please attach your full .config and also dmesg > without hacks? > > Regards, > Ruslan > > On Wed, Mar 23, 2016 at 2:21 PM, Pavel Machek <pavel@xxxxxx> wrote: >> On Mon 2016-03-21 12:51:51, Marek Szyprowski wrote: >>> Hi >>> >>> On 2016-03-18 21:20, Pavel Machek wrote: >>> >Hi! >>> > >>> >>>USB gadget stops working for me on n900, if I merge >>> >>Could you please give us more details? >>> >>Which gadget driver do you use (g_nokia?) >>> >Ok, so I could get it to work with v4.5, and this patch. I'm including >>> >my config, too. No, I don't think I'm using g_nokia. >>> >>> This shows that there are some serious problems, probably with your udc >>> driver, which doesn't handle deferred probe properly. Your patch workaround >>> it by waiting some predefined time before registering gadget driver, however >>> this is not the proper way. Please try to isolate what exactly is needed to >>> get the gadget driver registered properly in your system or at least please >>> provide some logs from the failed case. >> >> Well, Ruslan said he has n900 available, so I provided requested >> information. >> >> This is the dmesg with the hack: >> >> [ 0.623138] of_get_named_gpiod_flags: parsed 'ti,power-gpio' >> property of node '/ocp/spi@480ba00 >> 0/wl1251@0[0]' - status (0) >> [ 0.623565] wl1251: ERROR vio regulator missing: -517 >> [ 0.624359] musb probe HACK cf9a9e00 >> [ 0.624420] musb probe HACK/2 cf9a9e00 >> [ 0.624511] musb probe HACK/3 cf9a9e00 >> [ 0.624755] HS USB OTG: no transceiver configured >> [ 0.624847] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed >> with status -517 >> [ 0.626525] mousedev: PS/2 mouse device common for all mice >> ... >> [ 2.877441] ieee80211 phy1: Selected rate control algorithm >> 'minstrel' >> [ 2.879882] wl1251: loaded >> [ 2.889617] wl1251: initialized >> [ 2.897521] Two musb controllers? HACK >> [ 2.904968] musb probe HACK cf9a9e00 >> [ 2.912048] musb probe HACK/2 cf9a9e00 >> [ 2.918823] musb probe HACK/3 cf9a9e00 >> [ 2.928985] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk >> combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) >> [ 2.929016] musb-hdrc: MHDRC RTL version 1.400 >> [ 2.929046] musb-hdrc: setup fifo_mode 4 >> [ 2.929077] musb-hdrc: 28/31 max ep, 16384/16384 memory >> [ 2.930511] tsc2005 spi1.0: GPIO lookup for consumer reset >> [ 2.930541] tsc2005 spi1.0: using device tree for GPIO lookup >> >> In the kernel without the hack, there'll be only the first part of the >> dmesg, AFAICT. >> >> If there's an interest, I can repeat the test without the hack. >> >> Thanks, >> Pavel >> >> >>> >diff --git a/drivers/usb/gadget/udc/udc-core.c b/drivers/usb/gadget/udc/udc-core.c >>> >index b86a6f0..bee109f 100644 >>> >--- a/drivers/usb/gadget/udc/udc-core.c >>> >+++ b/drivers/usb/gadget/udc/udc-core.c >>> >@@ -542,14 +542,37 @@ err1: >>> > return ret; >>> > } >>> >-int usb_gadget_probe_driver(struct usb_gadget_driver *driver) >>> >+int usb_udc_attach_driver(const char *name, struct usb_gadget_driver *driver) >>> >+{ >>> >+ struct usb_udc *udc = NULL; >>> >+ int ret = -ENODEV; >>> >+ >>> >+ mutex_lock(&udc_lock); >>> >+ list_for_each_entry(udc, &udc_list, list) { >>> >+ ret = strcmp(name, dev_name(&udc->dev)); >>> >+ if (!ret) >>> >+ break; >>> >+ } >>> >+ if (ret) { >>> >+ ret = -ENODEV; >>> >+ goto out; >>> >+ } >>> >+ if (udc->driver) { >>> >+ ret = -EBUSY; >>> >+ goto out; >>> >+ } >>> >+ ret = udc_bind_to_driver(udc, driver); >>> >+out: >>> >+ mutex_unlock(&udc_lock); >>> >+ return ret; >>> >+} >>> >+EXPORT_SYMBOL_GPL(usb_udc_attach_driver); >>> >+ >>> >+int __usb_gadget_probe_driver(struct usb_gadget_driver *driver) >>> > { >>> > struct usb_udc *udc = NULL; >>> > int ret = -ENODEV; >>> >- if (!driver || !driver->bind || !driver->setup) >>> >- return -EINVAL; >>> >- >>> > mutex_lock(&udc_lock); >>> > if (driver->udc_name) { >>> > list_for_each_entry(udc, &udc_list, list) { >>> >@@ -567,16 +590,47 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver) >>> > } >>> > } >>> >- list_add_tail(&driver->pending, &gadget_driver_pending_list); >>> >+// list_add_tail(&driver->pending, &gadget_driver_pending_list); FIXME >>> > pr_info("udc-core: couldn't find an available UDC - added [%s] to list of pending drivers\n", >>> > driver->function); >>> >+ >>> > mutex_unlock(&udc_lock); >>> >- return 0; >>> >+ return ret; >>> > found: >>> > ret = udc_bind_to_driver(udc, driver); >>> > mutex_unlock(&udc_lock); >>> > return ret; >>> > } >>> >+ >>> >+#define USB_GADGET_BIND_RETRIES 5 >>> >+#define USB_GADGET_BIND_TIMEOUT (3 * HZ) >>> >+static void usb_gadget_work(struct work_struct *work) >>> >+{ >>> >+ struct usb_gadget_driver *driver = container_of(work, >>> >+ struct usb_gadget_driver, >>> >+ work.work); >>> >+ int res; >>> >+ >>> >+ if (driver->retries++ > USB_GADGET_BIND_RETRIES) { >>> >+ pr_err("couldn't find an available UDC\n"); >>> >+ return; >>> >+ } >>> >+ >>> >+ res = __usb_gadget_probe_driver(driver); >>> >+ if (res == -ENODEV) >>> >+ schedule_delayed_work(&driver->work, USB_GADGET_BIND_TIMEOUT); >>> >+} >>> >+ >>> >+int usb_gadget_probe_driver(struct usb_gadget_driver *driver) >>> >+{ >>> >+ if (!driver || !driver->bind || !driver->setup) >>> >+ return -EINVAL; >>> >+ >>> >+ INIT_DELAYED_WORK(&driver->work, usb_gadget_work); >>> >+ schedule_delayed_work(&driver->work, 0); >>> >+ >>> >+ return 0; >>> >+} >>> > EXPORT_SYMBOL_GPL(usb_gadget_probe_driver); >>> > int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) >>> >@@ -587,6 +641,8 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) >>> > if (!driver || !driver->unbind) >>> > return -EINVAL; >>> >+ cancel_delayed_work(&driver->work); >>> >+ >>> > mutex_lock(&udc_lock); >>> > list_for_each_entry(udc, &udc_list, list) >>> > if (udc->driver == driver) { >>> >@@ -747,7 +803,7 @@ static int __init usb_udc_init(void) >>> > udc_class->dev_uevent = usb_udc_uevent; >>> > return 0; >>> > } >>> >-subsys_initcall(usb_udc_init); >>> >+late_initcall_sync(usb_udc_init); >>> > static void __exit usb_udc_exit(void) >>> > { >>> >diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h >>> >index d82d006..adb1e68 100644 >>> >--- a/include/linux/usb/gadget.h >>> >+++ b/include/linux/usb/gadget.h >>> >@@ -1014,6 +1014,8 @@ static inline int usb_gadget_activate(struct usb_gadget *gadget) >>> > * @resume: Invoked on USB resume. May be called in_interrupt. >>> > * @reset: Invoked on USB bus reset. It is mandatory for all gadget drivers >>> > * and should be called in_interrupt. >>> >+ * @work: Gadget work used to bind to the USB controller. >>> >+ * @retries: Gadget retries to bind to the USB controller. >>> > * @driver: Driver model state for this driver. >>> > * @udc_name: A name of UDC this driver should be bound to. If udc_name is NULL, >>> > * this driver will be bound to any available UDC. >>> >@@ -1075,6 +1077,8 @@ struct usb_gadget_driver { >>> > void (*suspend)(struct usb_gadget *); >>> > void (*resume)(struct usb_gadget *); >>> > void (*reset)(struct usb_gadget *); >>> >+ struct delayed_work work; >>> >+ int retries; >>> > /* FIXME support safe rmmod */ >>> > struct device_driver driver; >>> > >>> >>> Best regards >> >> -- >> (english) http://www.livejournal.com/~pavelmachek >> (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html