On Tuesday 22 March 2016 03:22 PM, Grygorii Strashko wrote: > On 03/22/2016 08:37 AM, Lokesh Vutla wrote: >> TI's Industrial Communication Engine EVM is a low cost hardware mainly >> developed for industrial communication type applications using serial >> or Ethernet based interfaces. This platform features TI's AM3359 with >> 800MHz single core Cortex-A8 processor, 256MB DDR3, 64MB SPI flash, >> 8MB NOR Flash, mmc, usb, can, dual Ethernet ports. >> >> For more information, look at HW user guide[1], Data manual[2]. >> >> Just add basic support for the moment. >> >> [1] http://processors.wiki.ti.com/index.php/AM335x_Industrial_Communication_Engine_EVM_Rev2_1_HW_User_Guide >> [2] http://www.ti.com/lit/ds/symlink/am3359.pdf >> >> Signed-off-by: Lokesh Vutla <lokeshvutla@xxxxxx> >> --- >> .../devicetree/bindings/arm/omap/omap.txt | 3 + >> arch/arm/boot/dts/Makefile | 1 + >> arch/arm/boot/dts/am335x-icev2.dts | 303 +++++++++++++++++++++ >> 3 files changed, 307 insertions(+) >> create mode 100644 arch/arm/boot/dts/am335x-icev2.dts >> >> diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt >> index 21e71a5..20f6d71 100644 >> --- a/Documentation/devicetree/bindings/arm/omap/omap.txt >> +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt >> @@ -133,6 +133,9 @@ Boards: >> - AM335X Bone : Low cost community board >> compatible = "ti,am335x-bone", "ti,am33xx", "ti,omap3" >> >> +- AM3359 ICEv2 : Low cost Industrial Communication Engine EVM. >> + compatible = "ti,am3359-icev2", "ti,am33xx", "ti,omap3" >> + >> - AM335X OrionLXm : Substation Automation Platform >> compatible = "novatech,am335x-lxm", "ti,am33xx" >> >> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile >> index 52b34a0..7dcf55e 100644 >> --- a/arch/arm/boot/dts/Makefile >> +++ b/arch/arm/boot/dts/Makefile >> @@ -486,6 +486,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \ >> am335x-cm-t335.dtb \ >> am335x-evm.dtb \ >> am335x-evmsk.dtb \ >> + am335x-icev2.dtb \ >> am335x-lxm.dtb \ >> am335x-nano.dtb \ >> am335x-pepper.dtb \ >> diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts >> new file mode 100644 >> index 0000000..59c91e8 >> --- /dev/null >> +++ b/arch/arm/boot/dts/am335x-icev2.dts >> @@ -0,0 +1,303 @@ >> +/* >> + * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 as >> + * published by the Free Software Foundation. >> + */ >> + >> +/* >> + * AM335x ICE V2 board >> + * http://www.ti.com/tool/tmdsice3359 >> + */ >> + >> +/dts-v1/; >> + >> +#include "am33xx.dtsi" >> + >> +/ { >> + model = "TI AM3359 ICE-V2"; >> + compatible = "ti,am3359-icev2", "ti,am33xx"; >> + >> + memory { >> + device_type = "memory"; >> + reg = <0x80000000 0x10000000>; /* 256 MB */ >> + }; >> + >> + vbat: fixedregulator@0 { >> + compatible = "regulator-fixed"; >> + regulator-name = "vbat"; >> + regulator-min-microvolt = <5000000>; >> + regulator-max-microvolt = <5000000>; >> + regulator-boot-on; >> + }; >> + >> + vtt_fixed: fixedregulator@1 { >> + compatible = "regulator-fixed"; >> + regulator-name = "vtt"; >> + regulator-min-microvolt = <1500000>; >> + regulator-max-microvolt = <1500000>; >> + gpio = <&gpio0 18 GPIO_ACTIVE_HIGH>; >> + regulator-always-on; >> + regulator-boot-on; >> + enable-active-high; >> + }; >> + >> + leds { > > Could you split this node on two leds@0 and led@1 and and move > all tpic2810 leds under leds0 and all gpio leds under leds@1? > > otherwise gpio leds will not work because tpic2810 is > configured as module and so leds-gpio will be deferred until > tpic2810 is loaded (but it can be never loaded ;) > > led@x numeration has to be started from 0 for each leds@Y. Hmm I get your point. I was always doing insmod of tpic2810 before doing insmod of leds-gpio. Will fix it and repost. Thanks and regards, Lokesh -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
