Add basic support for CompuLab cm-t335 module based on AM335X SoC. CM-T335 is a tiny computer-on-module (CoM) / system-on-module (SoM) The module is built around the Texas Instruments Sitara AM3352/4 system-on-chip. The CPU is supplemented with up-to 512MB DDR3 and up-to 1GB of on-board NAND storage, WiFi connected to SPI, Bluetooth, Analog audio, Gigabit Ethernet, CAN bus. [v1 -> v2: integrate AM33XX_IOPAD macro in pinmux definitions ] Ilya Ledvich (6): ARM: OMAP2+: dts: cm-t335: add initial support ARM: OMAP2+: dts: cm-t335: add basic support for I2C ARM: OMAP2+: dts: cm-t335: add support for NAND flash ARM: OMAP2+: dts: cm-t335: add support for MMC ARM: OMAP2+: dts: cm-t335: add support for network device ARM: OMAP2+: dts: cm-t335: add support for PWM backlight .../devicetree/bindings/arm/omap/omap.txt | 3 + arch/arm/boot/dts/Makefile | 7 +- arch/arm/boot/dts/am335x-cm-t335.dts | 348 +++++++++++++++++++++ 3 files changed, 355 insertions(+), 3 deletions(-) create mode 100644 arch/arm/boot/dts/am335x-cm-t335.dts -- 2.5.0 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
