Re: [RFC PATCH] clocksource: ti-32k: convert to platform device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

Grygorii Strashko <grygorii.strashko@xxxxxx> writes:
> Since system clocksource is finally selected by Clocksource core at
> fs_initcall stage during boot there are no reasons to initialize
> ti_32k_timer at early boot stages. Hence, ti_32k_timer can be
> converted to use platform device/driver model and its PM can be
> implemented using PM runtime which is common for OMAP devices.
>
> Platform specific initialization code has to be disabled once as
> ti_32k_timer is converted to platform device - otherwise OMAP platform
> code will generate boot warnings.
>
> After this change, all counter_32k's platform code can be removed
> once all OMAP boards will be converted to DT.
>
> Cc: Tony Lindgren <tony@xxxxxxxxxxx>
> Cc: Felipe Balbi <balbi@xxxxxx>
> Signed-off-by: Grygorii Strashko <grygorii.strashko@xxxxxx>
> ---
>  arch/arm/mach-omap2/timer.c        | 16 +++--------
>  drivers/clocksource/timer-ti-32k.c | 58 ++++++++++++++++++++++++++++++++------
>  2 files changed, 53 insertions(+), 21 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
> index b18ebbe..3bfde44 100644
> --- a/arch/arm/mach-omap2/timer.c
> +++ b/arch/arm/mach-omap2/timer.c
> @@ -393,23 +393,15 @@ static const struct of_device_id omap_counter_match[] __initconst = {
>  static int __init __maybe_unused omap2_sync32k_clocksource_init(void)
>  {
>  	int ret;
> -	struct device_node *np = NULL;
>  	struct omap_hwmod *oh;
>  	const char *oh_name = "counter_32k";
>  
>  	/*
> -	 * If device-tree is present, then search the DT blob
> -	 * to see if the 32kHz counter is supported.
> +	 * If device-tree is present, then just exit -
> +	 * 32kHz clocksource driver will handle it.
>  	 */
> -	if (of_have_populated_dt()) {
> -		np = omap_get_timer_dt(omap_counter_match, NULL);
> -		if (!np)
> -			return -ENODEV;
> -
> -		of_property_read_string_index(np, "ti,hwmods", 0, &oh_name);
> -		if (!oh_name)
> -			return -ENODEV;
> -	}
> +	if (of_have_populated_dt())
> +		return 0;
>  
>  	/*
>  	 * First check hwmod data is available for sync32k counter
> diff --git a/drivers/clocksource/timer-ti-32k.c b/drivers/clocksource/timer-ti-32k.c
> index 8518d9d..e71496f 100644
> --- a/drivers/clocksource/timer-ti-32k.c
> +++ b/drivers/clocksource/timer-ti-32k.c
> @@ -39,8 +39,11 @@
>  #include <linux/time.h>
>  #include <linux/sched_clock.h>
>  #include <linux/clocksource.h>
> +#include <linux/module.h>
>  #include <linux/of.h>
>  #include <linux/of_address.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
>  
>  /*
>   * 32KHz clocksource ... always available, on pretty most chips except
> @@ -88,15 +91,28 @@ static u64 notrace omap_32k_read_sched_clock(void)
>  	return ti_32k_read_cycles(&ti_32k_timer.cs);
>  }
>  
> -static void __init ti_32k_timer_init(struct device_node *np)
> +static const struct of_device_id ti_32k_of_table[] = {
> +	{ .compatible = "ti,omap-counter32k" },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, ti_32k_of_table);
> +
> +static int __init ti_32k_probe(struct platform_device *pdev)
>  {
> +	struct device *dev = &pdev->dev;
> +	struct resource *res;
>  	int ret;
>  
> -	ti_32k_timer.base = of_iomap(np, 0);
> -	if (!ti_32k_timer.base) {
> -		pr_err("Can't ioremap 32k timer base\n");
> -		return;
> -	}
> +	/* Static mapping, never released */
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	ti_32k_timer.base = devm_ioremap_resource(dev, res);
> +	if (IS_ERR(ti_32k_timer.base))
> +		return PTR_ERR(ti_32k_timer.base);
> +
> +	pm_runtime_enable(dev);
> +	ret = pm_runtime_get_sync(dev);
> +	if (ret < 0)
> +		goto probe_err;
>  
>  	ti_32k_timer.counter = ti_32k_timer.base;
>  
> @@ -116,11 +132,35 @@ static void __init ti_32k_timer_init(struct device_node *np)
>  	ret = clocksource_register_hz(&ti_32k_timer.cs, 32768);
>  	if (ret) {
>  		pr_err("32k_counter: can't register clocksource\n");
> -		return;
> +		goto probe_err;
>  	}
>  
>  	sched_clock_register(omap_32k_read_sched_clock, 32, 32768);
>  	pr_info("OMAP clocksource: 32k_counter at 32768 Hz\n");
> +	return 0;
> +
> +probe_err:
> +	pm_runtime_put_noidle(dev);
> +	return ret;
> +};
> +
> +static struct platform_driver ti_32k_driver __initdata = {
> +	.probe		= ti_32k_probe,
> +	.driver		= {
> +		.name	= "ti_32k_timer",
> +		.of_match_table = of_match_ptr(ti_32k_of_table),
> +	}
> +};
> +
> +static int __init ti_32k_init(void)
> +{
> +	return platform_driver_register(&ti_32k_driver);
>  }
> -CLOCKSOURCE_OF_DECLARE(ti_32k_timer, "ti,omap-counter32k",
> -		ti_32k_timer_init);
> +
> +subsys_initcall(ti_32k_init);
> +
> +MODULE_AUTHOR("Paul Mundt");
> +MODULE_AUTHOR("Juha Yrjölä");
> +MODULE_DESCRIPTION("OMAP2 32k Timer");
> +MODULE_ALIAS("platform:ti_32k_timer");
> +MODULE_LICENSE("GPL v2");

this will break clksource_of_init(), right ? Eventually, we want that to
be the only thing called by our .init_time method. I'll leave it to Tony
to decide, but IMO this is not a good path forward for timers.

-- 
balbi

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux