[PATCH 28/37] ARM: dts: omap4-duovero: Fix regulator enable GPIO polarity

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The enable GPIO is active high, but is flagged as active low in the gpio
property. As the gpio property flags are currently unused by the driver
this doesn't cause any issue for now, but will break later if the driver
starts making use of the flags. Fix it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
---
 arch/arm/boot/dts/omap4-duovero.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Cc: linux-omap@xxxxxxxxxxxxxxx
Cc: Benoit Cousson <bcousson@xxxxxxxxxxxx>
Cc: Tony Lindgren <tony@xxxxxxxxxxx>

diff --git a/arch/arm/boot/dts/omap4-duovero.dtsi b/arch/arm/boot/dts/omap4-duovero.dtsi
index f2a94fa62552..23c1a74f91ea 100644
--- a/arch/arm/boot/dts/omap4-duovero.dtsi
+++ b/arch/arm/boot/dts/omap4-duovero.dtsi
@@ -56,7 +56,7 @@
 		regulator-name = "w2cbw0015";
 		regulator-min-microvolt = <3000000>;
 		regulator-max-microvolt = <3000000>;
-		gpio = <&gpio2 11 GPIO_ACTIVE_LOW>;		/* gpio_43 */
+		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;		/* gpio_43 */
 		startup-delay-us = <70000>;
 		enable-active-high;
 		regulator-boot-on;
-- 
2.4.9

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux