The enable GPIO is active low, but is flagged as active high in the gpio property. As the gpio property flags are currently unused by the driver this doesn't cause any issue for now, but will break later if the driver starts making use of the flags. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> --- arch/arm/boot/dts/omap3-beagle-xm.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) Cc: linux-omap@xxxxxxxxxxxxxxx Cc: Benoit Cousson <bcousson@xxxxxxxxxxxx> Cc: Tony Lindgren <tony@xxxxxxxxxxx> diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 7c4dca122a91..f44f17673061 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -80,7 +80,7 @@ regulator-name = "hsusb2_vbus"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&twl_gpio 18 0>; /* GPIO LEDA */ + gpio = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* GPIO LEDA */ startup-delay-us = <70000>; }; -- 2.4.9 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
