Kim Kyuwon <chammoru@xxxxxxxxx> writes:
> Hi, Kevin
>
> On Tue, Mar 10, 2009 at 2:21 AM, Kevin Hilman
> <khilman@xxxxxxxxxxxxxxxxxxx> wrote:
>> Kim Kyuwon <chammoru@xxxxxxxxx> writes:
>>
>>> Hi, Kevin Hilman.
>>>
>>> I'm sending this mail to tell you a few things about two recent
>>> fetches that I sent.
>>>
>>> 1. [OMAP: GPIO: Remove enable_irq_wake() and disable_irq_wake() in
>>> _set_gpio_wakeup() function]
>>> I just found that you already sent the same patch in [OMAP2/3: GPIO:
>>> remove recursion in IRQ wakeup path]. Sorry, I didn't know that. I
>>> will cancel my patch. But can I know when your patch will be applied?
>>
>> I need to update the description of mine and resend after
>> incorporating some review comments.
>>
>>> 2. [OMAP3: PM: Add the wakeup source driver]
>>> Would you please review this patch? If something is unclear or need to
>>> change, please let me know. I would answer with please.
>>
>> Yes, I will review this week.
>
> Can I ask again when I can get your review? :)
Hi Kim, I'm sorry for the delay on reviewing your patch. I've been
delaying because not only do I want to review it, I want to try it
out. I will do both today.
Kevin
> And I'm resending the patch which is made for PM branch and added a
> few trivial changes.
> I really want to hear your opinion.
>
> Thanks & Regards,
>
> --
> Kyuwon
>
> --
> [PATCH] OMAP3: PM: Add the wakeup source driver
>
> Sometimes, it is necessary to find out "what does wake up my board?".
> Notifying wake-up source feature may be used to blame unexpected
> wake-up events which increase power consumption. And user mode
> applications can act smartly according to the wake-up event to
> minimize power consumption. This driver uses sysfs interface to give
> information to user mode applications like:
>
> cat /sys/power/wakeup_irq
> cat /sys/power/wakeup_event
>
> This driver also privides the unified GPIO wake-up source
> configuration. specific GPIO settings in the board files are:
>
> /* Wakeup source configuration */
> static struct gpio_wake boardname_gpio_wake[] = {
> { 23, IRQF_TRIGGER_RISING | IRQF_SHARED, "BT_WAKEUP", 1},
> { 24, IRQF_TRIGGER_RISING | IRQF_SHARED, "USB_DETECT", 1},
> };
>
> static struct omap_wake_platform_data boardname_wake_data = {
> .qpio_wakes = boardname_gpio_wake,
> .gpio_wake_num = ARRAY_SIZE(boardname_gpio_wake),
> };
>
> static struct platform_device boardname_wakeup = {
> .name = "omap-wake",
> .id = -1,
> .dev = {
> .platform_data = &boardname_wake_data,
> },
> };
>
> The patch adds Kconfig options "OMAP34xx wakeup source support" under
> "System type"->"TI OMAP implementations" menu.
>
> Signed-off-by: Kim Kyuwon <q1.kim@xxxxxxxxxxx>
> ---
> arch/arm/mach-omap2/Makefile | 1 +
> arch/arm/mach-omap2/irq.c | 41 +++
> arch/arm/mach-omap2/prcm-common.h | 4 +
> arch/arm/mach-omap2/prm-regbits-34xx.h | 6 +
> arch/arm/mach-omap2/wake34xx.c | 474 ++++++++++++++++++++++++++++++++
> arch/arm/plat-omap/Kconfig | 9 +
> arch/arm/plat-omap/include/mach/irqs.h | 1 +
> arch/arm/plat-omap/include/mach/wake.h | 30 ++
> 8 files changed, 566 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/mach-omap2/wake34xx.c
> create mode 100644 arch/arm/plat-omap/include/mach/wake.h
>
> diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
> index 16c6fb8..29ad0f1 100644
> --- a/arch/arm/mach-omap2/Makefile
> +++ b/arch/arm/mach-omap2/Makefile
> @@ -25,6 +25,7 @@ obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o
> obj-$(CONFIG_ARCH_OMAP24XX) += sleep24xx.o
> obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o cpuidle34xx.o
> obj-$(CONFIG_PM_DEBUG) += pm-debug.o
> +obj-$(CONFIG_OMAP_WAKE) += wake34xx.o
> endif
>
> # SmartReflex driver
> diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
> index be4b596..e3a2b53 100644
> --- a/arch/arm/mach-omap2/irq.c
> +++ b/arch/arm/mach-omap2/irq.c
> @@ -193,6 +193,47 @@ int omap_irq_pending(void)
> return 0;
> }
>
> +/*
> + * Get the first pending MPU IRQ number from 'irq_start'.
> + * If none, return -1.
> + */
> +int omap_get_pending_mpu_irq(unsigned int irq_start)
> +{
> + struct omap_irq_bank *bank = irq_banks;
> + int irq, bits_skip, bit_start;
> +
> + if (irq_start >= bank->nr_irqs)
> + return -1;
> +
> + bits_skip = irq_start % IRQ_BITS_PER_REG;
> + bit_start = irq_start - bits_skip;
> +
> + for (irq = bit_start; irq < bank->nr_irqs; irq += IRQ_BITS_PER_REG) {
> + int ret, i, limit, offset = irq & (~(IRQ_BITS_PER_REG - 1));
> +
> + ret = intc_bank_read_reg(bank, (INTC_PENDING_IRQ0 + offset));
> + if (!ret)
> + continue;
> +
> + limit = IRQ_BITS_PER_REG;
> +
> + if (bit_start == irq) {
> + ret >>= bits_skip;
> + limit -= bits_skip;
> + } else
> + bits_skip = 0;
> +
> + for (i = 0; i < limit; i++) {
> + if (ret & 0x1)
> + return irq + i + bits_skip;
> + else
> + ret >>= 1;
> + }
> + }
> +
> + return -1;
> +}
> +
> void __init omap_init_irq(void)
> {
> unsigned long nr_of_irqs = 0;
> diff --git a/arch/arm/mach-omap2/prcm-common.h
> b/arch/arm/mach-omap2/prcm-common.h
> index cb1ae84..1f340aa 100644
> --- a/arch/arm/mach-omap2/prcm-common.h
> +++ b/arch/arm/mach-omap2/prcm-common.h
> @@ -273,6 +273,10 @@
> #define OMAP3430_ST_D2D_SHIFT 3
> #define OMAP3430_ST_D2D_MASK (1 << 3)
>
> +/* PM_WKST3_CORE, CM_IDLEST3_CORE shared bits */
> +#define OMAP3430_ST_USBTLL_SHIFT 2
> +#define OMAP3430_ST_USBTLL_MASK (1 << 2)
> +
> /* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */
> #define OMAP3430_EN_GPIO1 (1 << 3)
> #define OMAP3430_EN_GPIO1_SHIFT 3
> diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h
> b/arch/arm/mach-omap2/prm-regbits-34xx.h
> index cb648f9..6066032 100644
> --- a/arch/arm/mach-omap2/prm-regbits-34xx.h
> +++ b/arch/arm/mach-omap2/prm-regbits-34xx.h
> @@ -332,6 +332,8 @@
> /* PM_IVA2GRPSEL1_CORE specific bits */
>
> /* PM_WKST1_CORE specific bits */
> +#define OMAP3430_ST_MMC3_SHIFT 30
> +#define OMAP3430_ST_MMC3_MASK (1 << 30)
>
> /* PM_PWSTCTRL_CORE specific bits */
> #define OMAP3430_MEM2ONSTATE_SHIFT 18
> @@ -373,6 +375,7 @@
> /* PM_IVA2GRPSEL_WKUP specific bits */
>
> /* PM_WKST_WKUP specific bits */
> +#define OMAP3430_ST_IO_CHAIN (1 << 16)
> #define OMAP3430_ST_IO (1 << 8)
>
> /* PRM_CLKSEL */
> @@ -430,6 +433,9 @@
>
> /* PM_PREPWSTST_PER specific bits */
>
> +/* PM_WKST_USBHOST specific bits */
> +#define OMAP3430_ST_USBHOST (1 << 0)
> +
> /* RM_RSTST_EMU specific bits */
>
> /* PM_PWSTST_EMU specific bits */
> diff --git a/arch/arm/mach-omap2/wake34xx.c b/arch/arm/mach-omap2/wake34xx.c
> new file mode 100644
> index 0000000..c352d08
> --- /dev/null
> +++ b/arch/arm/mach-omap2/wake34xx.c
> @@ -0,0 +1,474 @@
> +/*
> + * wake34xx.c
> + *
> + * Copyright (c) 2009 Samsung Eletronics
> + *
> + * Author: Kim Kyuwon <q1.kim@xxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/platform_device.h>
> +#include <linux/interrupt.h>
> +
> +#include <mach/gpio.h>
> +#include <mach/wake.h>
> +
> +#include "prm-regbits-34xx.h"
> +
> +/*
> + * Sometimes, it is necessary to find out "what does wake up my board?"
> + * Notifying wake-up source feature may be used to blame unexpected wake-up
> + * events which increase power consumption. And user mode applications can
> + * act smartly according to the wake-up event to minimize power consumption.
> + * This driver uses sysfs interface to give information to user mode
> + * applications.
> + */
> +
> +#define WAKE_STR_LEN 64
> +#define WAKE_BUF_LEN 32
> +
> +char wakeup_irq[WAKE_STR_LEN] = "None";
> +char wakeup_event[WAKE_STR_LEN] = "None";
> +
> +struct wake_event {
> + int index;
> + const char *name;
> +};
> +
> +static struct wake_event omap3_wkup_events[] = {
> + { OMAP3430_ST_IO_CHAIN, "ST_IO" },
> + { OMAP3430_ST_IO, "ST_SR2" },
> + { OMAP3430_ST_SR2_MASK, "ST_SR2" },
> + { OMAP3430_ST_SR1_MASK, "ST_SR1" },
> + { OMAP3430_ST_GPIO1_MASK, "ST_GPIO1" },
> + { OMAP3430_ST_GPT12_MASK, "ST_GPT12" },
> + { OMAP3430_ST_GPT1_MASK, "ST_GPT1" },
> +};
> +
> +static struct wake_event omap3_per_events[] = {
> + { OMAP3430_ST_GPIO6_MASK, "ST_GPIO6" },
> + { OMAP3430_ST_GPIO5_MASK, "ST_GPIO5" },
> + { OMAP3430_ST_GPIO4_MASK, "ST_GPIO4" },
> + { OMAP3430_ST_GPIO3_MASK, "ST_GPIO3" },
> + { OMAP3430_ST_GPIO2_MASK, "ST_GPIO2" },
> + { OMAP3430_ST_UART3_MASK, "ST_UART3" },
> + { OMAP3430_ST_GPT9_MASK, "ST_GPT9" },
> + { OMAP3430_ST_GPT8_MASK, "ST_GPT8" },
> + { OMAP3430_ST_GPT7_MASK, "ST_GPT7" },
> + { OMAP3430_ST_GPT6_MASK, "ST_GPT6" },
> + { OMAP3430_ST_GPT5_MASK, "ST_GPT5" },
> + { OMAP3430_ST_GPT4_MASK, "ST_GPT4" },
> + { OMAP3430_ST_GPT3_MASK, "ST_GPT3" },
> + { OMAP3430_ST_GPT2_MASK, "ST_GPT2" },
> + { OMAP3430_EN_MCBSP4, "EN_MCBSP4" },
> + { OMAP3430_EN_MCBSP3, "EN_MCBSP3" },
> + { OMAP3430_EN_MCBSP2, "EN_MCBSP2" },
> +};
> +
> +static struct wake_event omap3_core1_events[] = {
> + { OMAP3430_ST_MMC3_MASK, "ST_MMC3" },
> + { OMAP3430_ST_MMC2_MASK, "ST_MMC2" },
> + { OMAP3430_ST_MMC1_MASK, "ST_MMC1" },
> + { OMAP3430_ST_MCSPI4_MASK, "ST_MCSPI4" },
> + { OMAP3430_ST_MCSPI3_MASK, "ST_MCSPI3" },
> + { OMAP3430_ST_MCSPI2_MASK, "ST_MCSPI2" },
> + { OMAP3430_ST_MCSPI1_MASK, "ST_MCSPI1" },
> + { OMAP3430_ST_I2C3_MASK, "ST_I2C3" },
> + { OMAP3430_ST_I2C2_MASK, "ST_I2C2" },
> + { OMAP3430_ST_I2C1_MASK, "ST_I2C1" },
> + { OMAP3430_ST_UART1_MASK, "ST_UART1" },
> + { OMAP3430_ST_GPT11_MASK, "ST_GPT11" },
> + { OMAP3430_ST_GPT10_MASK, "ST_GPT10" },
> + { OMAP3430_ST_MCBSP5_MASK, "ST_MCBSP5" },
> + { OMAP3430_ST_MCBSP1_MASK, "ST_MCBSP1" },
> +};
> +
> +static struct wake_event omap3es1_core1_events[] = {
> + { OMAP3430ES1_ST_FSHOSTUSB_MASK, "ST_FSHOSTUSB" },
> + { OMAP3430ES1_ST_HSOTGUSB_MASK, "ST_HSOTGUSB" },
> + { OMAP3430_ST_D2D_MASK, "ST_D2D" },
> +};
> +
> +static struct wake_event omap3es2_core1_events[] = {
> + { OMAP3430ES2_ST_HSOTGUSB_STDBY_MASK, "ST_HSOTGUSB" },
> +};
> +
> +static struct wake_event omap3_core2_events[] = {
> + { OMAP3430_ST_USBTLL_MASK, "ST_USBTLL" },
> +};
> +
> +static struct wake_event omap3_usbhost_events[] = {
> + { OMAP3430_ST_USBHOST, "ST_USBHOST" },
> +};
> +
> +static ssize_t wakeup_source_show(struct kobject *kobj,
> + struct kobj_attribute *attr, char *buf);
> +
> +static void omap_wake_update_event(char *event)
> +{
> + int len;
> +
> + if (wakeup_event[0])
> + len = strlen(wakeup_event) + strlen(event) + 2;
> + else
> + len = strlen(wakeup_event) + strlen(event);
> +
> + if (len > WAKE_STR_LEN - 1) {
> + printk(KERN_ERR "Can't record the wakeup event: %s\n", event);
> + return;
> + }
> +
> + if (wakeup_event[0])
> + strcat(wakeup_event, ", ");
> + strcat(wakeup_event, event);
> +}
> +
> +static void omap_wake_detect_wkup(u32 wkst, char *event)
> +{
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(omap3_wkup_events); i++)
> + if (wkst & omap3_wkup_events[i].index) {
> + strncpy(event, omap3_wkup_events[i].name,
> + WAKE_BUF_LEN - 1);
> + return;
> + }
> +
> + snprintf(event, WAKE_BUF_LEN, "WKUP:0x%08x", wkst);
> +}
> +
> +static void omap_wake_detect_per(u32 wkst, char *event)
> +{
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(omap3_per_events); i++)
> + if (wkst & omap3_per_events[i].index) {
> + strncpy(event, omap3_per_events[i].name,
> + WAKE_BUF_LEN - 1);
> + return;
> + }
> +
> + snprintf(event, WAKE_BUF_LEN, "PER:0x%08x", wkst);
> +}
> +
> +static void omap_wake_detect_core1(u32 wkst, char *event)
> +{
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(omap3_core1_events); i++)
> + if (wkst & omap3_core1_events[i].index) {
> + strncpy(event, omap3_core1_events[i].name,
> + WAKE_BUF_LEN - 1);
> + return;
> + }
> +
> + if (omap_rev() == OMAP3430_REV_ES1_0) {
> + for (i = 0; i < ARRAY_SIZE(omap3es1_core1_events); i++) {
> + if (wkst & omap3es1_core1_events[i].index) {
> + strncpy(event, omap3es1_core1_events[i].name,
> + WAKE_BUF_LEN - 1);
> + return;
> + }
> + }
> + } else {
> + for (i = 0; i < ARRAY_SIZE(omap3es2_core1_events); i++) {
> + if (wkst & omap3es2_core1_events[i].index) {
> + strncpy(event, omap3es2_core1_events[i].name,
> + WAKE_BUF_LEN - 1);
> + return;
> + }
> + }
> + }
> +
> + snprintf(event, WAKE_BUF_LEN, "CORE1:0x%08x", wkst);
> +}
> +
> +static void omap_wake_detect_core2(u32 wkst, char *event)
> +{
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(omap3_core2_events); i++)
> + if (wkst & omap3_core2_events[i].index) {
> + strncpy(event, omap3_core2_events[i].name,
> + WAKE_BUF_LEN - 1);
> + return;
> + }
> +
> + snprintf(event, WAKE_BUF_LEN, "CORE2:0x%08x", wkst);
> +}
> +
> +static void omap_wake_detect_usbhost(u32 wkst, char *event)
> +{
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(omap3_usbhost_events); i++)
> + if (wkst & omap3_usbhost_events[i].index) {
> + strncpy(event, omap3_usbhost_events[i].name,
> + WAKE_BUF_LEN - 1);
> + return;
> + }
> +
> + snprintf(event, WAKE_BUF_LEN, "USBHOST:0x%08x", wkst);
> +}
> +
> +/* Detect wake-up events */
> +static void omap_wake_detect_wakeup(void)
> +{
> + u32 wkst;
> + char buf[WAKE_BUF_LEN] = {0, };
> + int irq, len, prcm_irq = 0;
> +
> + /* Initialize global string variables */
> + memset(wakeup_irq, 0x0, WAKE_STR_LEN);
> + memset(wakeup_event, 0x0, WAKE_STR_LEN);
> +
> + /* IRQ */
> + irq = omap_get_pending_mpu_irq(0);
> + while (irq >= 0) {
> + if (irq == INT_34XX_SYS_NIRQ)
> + omap_wake_update_event("sys_nirq");
> + else if (irq == INT_34XX_PRCM_MPU_IRQ)
> + prcm_irq = 1;
> +
> + len = strlen(wakeup_irq) +
> + snprintf(buf, WAKE_BUF_LEN, "%d", irq);
> + if (len > WAKE_STR_LEN - 1)
> + break;
> +
> + strcat(wakeup_irq, buf);
> +
> + irq = omap_get_pending_mpu_irq(irq + 1);
> + if (irq >= 0) {
> + len = strlen(wakeup_irq) + 2;
> + if (len > WAKE_STR_LEN - 1)
> + break;
> +
> + strcat(wakeup_irq, ", ");
> + }
> + }
> + if (!wakeup_irq[0])
> + strncpy(wakeup_irq, "Unknown", WAKE_STR_LEN - 1);
> + printk(KERN_INFO "Wake-up IRQ: %s\n", wakeup_irq);
> +
> + if (!prcm_irq)
> + goto end_detect;
> +
> + /* WKUP */
> + wkst = prm_read_mod_reg(WKUP_MOD, PM_WKST);
> + if (wkst) {
> + omap_wake_detect_wkup(wkst, buf);
> + omap_wake_update_event(buf);
> + }
> +
> + /* PER */
> + wkst = prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST);
> + if (wkst) {
> + omap_wake_detect_per(wkst, buf);
> + omap_wake_update_event(buf);
> + }
> +
> + /* CORE */
> + wkst = prm_read_mod_reg(CORE_MOD, PM_WKST1);
> + if (wkst) {
> + omap_wake_detect_core1(wkst, buf);
> + omap_wake_update_event(buf);
> + }
> + wkst = prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3);
> + if (wkst) {
> + omap_wake_detect_core2(wkst, buf);
> + omap_wake_update_event(buf);
> + }
> +
> + /* USBHOST */
> + wkst = prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, PM_WKST);
> + if (wkst) {
> + omap_wake_detect_usbhost(wkst, buf);
> + omap_wake_update_event(buf);
> + }
> +
> +end_detect:
> + if (!wakeup_event[0])
> + strncpy(wakeup_event, "Unknown", WAKE_STR_LEN - 1);
> +}
> +
> +static struct kobj_attribute wakeup_irq_attr =
> + __ATTR(wakeup_irq, 0644, wakeup_source_show, NULL);
> +
> +static struct kobj_attribute wakeup_event_attr =
> + __ATTR(wakeup_event, 0644, wakeup_source_show, NULL);
> +
> +static ssize_t wakeup_source_show(struct kobject *kobj,
> + struct kobj_attribute *attr, char *buf)
> +{
> + if (attr == &wakeup_irq_attr)
> + return sprintf(buf, "%s\n", wakeup_irq);
> + else if (attr == &wakeup_event_attr)
> + return sprintf(buf, "%s\n", wakeup_event);
> + else
> + return -EINVAL;
> +}
> +
> +static irqreturn_t omap_wake_detect_gpio(int irq, void *dev_id)
> +{
> + if (!strncmp(wakeup_event, "Unknown", WAKE_STR_LEN - 1))
> + strncpy(wakeup_event, dev_id, WAKE_STR_LEN - 1);
> + else
> + omap_wake_update_event(dev_id);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int __devinit omap_wake_probe(struct platform_device *pdev)
> +{
> + struct omap_wake_platform_data *pdata = pdev->dev.platform_data;
> + struct gpio_wake *gw;
> + int i, ret;
> +
> + /*
> + * It may be good to configure GPIO wake-up sources in each driver.
> + * Buf if the specific device driver doesn't exist, you can use
> + * omap-wake driver to configure gpio wake-up sources.
> + */
> + for (i = 0; i < pdata->gpio_wake_num; i++) {
> + gw = pdata->qpio_wakes + i;
> +
> + if (gw->request) {
> + ret = gpio_request(gw->gpio, gw->name);
> + if (ret) {
> + dev_err(&pdev->dev, "can't request gpio%d"
> + ", return %d\n", gw->gpio, ret);
> + goto failed_free_gpio;
> + }
> + }
> + gpio_direction_input(gw->gpio);
> + enable_irq_wake(gpio_to_irq(gw->gpio));
> + }
> +
> + ret = sysfs_create_file(power_kobj, &wakeup_irq_attr.attr);
> + if (ret)
> + dev_err(&pdev->dev, "sysfs_create_file %s failed: %d\n",
> + wakeup_irq_attr.attr.name, ret);
> +
> + ret = sysfs_create_file(power_kobj, &wakeup_event_attr.attr);
> + if (ret)
> + dev_err(&pdev->dev, "sysfs_create_file %s failed: %d\n",
> + wakeup_event_attr.attr.name, ret);
> +
> + return 0;
> +
> +failed_free_gpio:
> + for (i--; i >= 0; i--) {
> + gw = pdata->qpio_wakes + i;
> +
> + if (gw->request)
> + gpio_free(gw->gpio);
> + }
> +
> + return ret;
> +}
> +
> +static int __devexit omap_wake_remove(struct platform_device *pdev)
> +{
> + struct omap_wake_platform_data *pdata = pdev->dev.platform_data;
> + struct gpio_wake *gw;
> + int i;
> +
> + for (i = 0; i < pdata->gpio_wake_num; i++) {
> + gw = pdata->qpio_wakes + i;
> +
> + if (gw->request)
> + gpio_free(gw->gpio);
> +
> + disable_irq_wake(gpio_to_irq(gw->gpio));
> + }
> +
> + return 0;
> +}
> +
> +static int omap_wake_suspend(struct platform_device *pdev, pm_message_t state)
> +{
> + struct omap_wake_platform_data *pdata = pdev->dev.platform_data;
> + struct gpio_wake *gw;
> + int i, ret;
> +
> + for (i = 0; i < pdata->gpio_wake_num; i++) {
> + gw = pdata->qpio_wakes + i;
> +
> + ret = request_irq(gpio_to_irq(gw->gpio), omap_wake_detect_gpio,
> + gw->irqflag, gw->name, (void *)gw->name);
> + if (ret) {
> + dev_err(&pdev->dev, "can't get IRQ%d, return %d\n",
> + gpio_to_irq(gw->gpio), ret);
> + goto failed_free_irq;
> + }
> + }
> +
> + return 0;
> +
> +failed_free_irq:
> + for (i--; i >= 0; i--) {
> + gw = pdata->qpio_wakes + i;
> + free_irq(gpio_to_irq(gw->gpio), (void *)gw->name);
> + }
> +
> + return ret;
> +}
> +
> +static int omap_wake_resume_early(struct platform_device *pdev)
> +{
> + omap_wake_detect_wakeup();
> +
> + return 0;
> +}
> +
> +static int omap_wake_resume(struct platform_device *pdev)
> +{
> + struct omap_wake_platform_data *pdata = pdev->dev.platform_data;
> + struct gpio_wake *gw;
> + int i;
> +
> + for (i = 0; i < pdata->gpio_wake_num; i++) {
> + gw = pdata->qpio_wakes + i;
> +
> + free_irq(gpio_to_irq(gw->gpio), (void *)gw->name);
> + }
> +
> + printk(KERN_INFO "Wake-up event: %s\n", wakeup_event);
> +
> + return 0;
> +}
> +
> +static struct platform_driver omap_wake_driver = {
> + .probe = omap_wake_probe,
> + .remove = __devexit_p(omap_wake_remove),
> + .suspend = omap_wake_suspend,
> + .resume_early = omap_wake_resume_early,
> + .resume = omap_wake_resume,
> + .driver = {
> + .name = "omap-wake",
> + .owner = THIS_MODULE,
> + },
> +};
> +
> +static int __init omap_wake_init(void)
> +{
> + return platform_driver_register(&omap_wake_driver);
> +}
> +
> +module_init(omap_wake_init);
> +
> +static void __exit omap_wake_exit(void)
> +{
> + platform_driver_unregister(&omap_wake_driver);
> +}
> +module_exit(omap_wake_exit);
> +
> +MODULE_AUTHOR("Kim Kyuwon <q1.kim@xxxxxxxxxxx>");
> +MODULE_DESCRIPTION("OMAP34xx wakeup driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
> index b8f1298..f89efaa 100644
> --- a/arch/arm/plat-omap/Kconfig
> +++ b/arch/arm/plat-omap/Kconfig
> @@ -184,6 +184,15 @@ config OMAP_IOMMU
> Say Y here if you want to use OMAP IOMMU support for IVA2 and
> Camera in OMAP3.
>
> +config OMAP_WAKE
> + tristate "OMAP34xx wakeup source support"
> + depends on ARCH_OMAP34XX && PM
> + default n
> + help
> + Select this option if you want to know what kind of wake-up event
> + wakes up your board from the low power mode. And this option
> + provides the unified GPIO wake-up source configuration.
> +
> choice
> prompt "System timer"
> default OMAP_MPU_TIMER
> diff --git a/arch/arm/plat-omap/include/mach/irqs.h
> b/arch/arm/plat-omap/include/mach/irqs.h
> index c9a5b19..d7961d4 100644
> --- a/arch/arm/plat-omap/include/mach/irqs.h
> +++ b/arch/arm/plat-omap/include/mach/irqs.h
> @@ -388,6 +388,7 @@
> #ifndef __ASSEMBLY__
> extern void omap_init_irq(void);
> extern int omap_irq_pending(void);
> +extern int omap_get_pending_mpu_irq(unsigned int irq_start);
> void omap3_intc_save_context(void);
> void omap3_intc_restore_context(void);
> #endif
> diff --git a/arch/arm/plat-omap/include/mach/wake.h
> b/arch/arm/plat-omap/include/mach/wake.h
> new file mode 100644
> index 0000000..713d89a
> --- /dev/null
> +++ b/arch/arm/plat-omap/include/mach/wake.h
> @@ -0,0 +1,30 @@
> +/*
> + * wake.h
> + *
> + * Copyright (c) 2009 Samsung Eletronics
> + *
> + * Author: Kim Kyuwon <q1.kim@xxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#ifndef _WAKE_H_
> +#define _WAKE_H_
> +
> +struct gpio_wake {
> + unsigned int gpio;
> + unsigned long irqflag;
> + const char *name;
> + int request;
> +};
> +
> +struct omap_wake_platform_data{
> + struct gpio_wake *qpio_wakes;
> + int gpio_wake_num;
> +};
> +
> +#endif /* _WAKE_H_ */
> +
> --
> 1.5.2.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
